From owner-freebsd-hackers Thu Nov 9 09:06:18 1995 Return-Path: owner-hackers Received: (from root@localhost) by freefall.freebsd.org (8.6.12/8.6.6) id JAA23808 for hackers-outgoing; Thu, 9 Nov 1995 09:06:18 -0800 Received: from spot.lodgenet.com (lodgenet.iw.net [204.157.148.88]) by freefall.freebsd.org (8.6.12/8.6.6) with ESMTP id JAA23759 for ; Thu, 9 Nov 1995 09:04:50 -0800 Received: from jake.lodgenet.com (jake.lodgenet.com [204.124.120.30]) by spot.lodgenet.com (8.6.12/8.6.12) with ESMTP id LAA18925; Thu, 9 Nov 1995 11:03:44 -0600 Received: from localhost (localhost [127.0.0.1]) by jake.lodgenet.com (8.6.12/8.6.12) with SMTP id LAA09270; Thu, 9 Nov 1995 11:16:16 -0600 Message-Id: <199511091716.LAA09270@jake.lodgenet.com> X-Authentication-Warning: jake.lodgenet.com: Host localhost didn't use HELO protocol X-Mailer: exmh version 1.6.2 7/18/95 To: "Eric L. Hernes" cc: se@ZPR.Uni-Koeln.DE (Stefan Esser), hackers@freebsd.org Subject: Re: compaq's builtin pci bus In-reply-to: Your message of "Wed, 08 Nov 1995 16:36:53 CST." <199511082236.QAA01253@jake.lodgenet.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Thu, 09 Nov 1995 11:16:15 -0600 From: "Eric L. Hernes" Sender: owner-hackers@freebsd.org Precedence: bulk >Stefan Esser writes: >>On Nov 8, 13:14, "Eric L. Hernes" wrote: >> >>Well, I tried to get the -current PCI probe code into 2.1R >>many weeks ago, but it was decided, it was to dangerous with >>the release expected a few days later ... :) >> >>I really would like to know, whether it works with the most >>recent SNAP, or only with -current ... >> here's the probes from the latest snap and -current: 2.1.0-951104-SNAP: npx0 on motherboard npx0: INT 16 interface sb0 at 0x220 irq 7 drq 1 on isa sb0: pcibus_setup(1): mode1res=0x8000000c (0x80000000), mode2res=0x0c (0x0e) BIOS Geometries: 0:037f0e3e 0..895=896 cylinders, 0..14=15 heads, 1..62=62 sectors 1:03d90b23 0..985=986 cylinders, 0..11=12 heads, 1..35=35 sectors 0 accounted for wd0s1: type 0xa5, start 62, end = 613799, size 613738 : OK wd1s1: type 0xa5, start 35, end = 415379, size 415345 : OK -current: npx0 on motherboard npx0: INT 16 interface sb0 at 0x220 irq 7 drq 1 on isa sb0: imasks: bio c0004040, tty c0031212, net c0031212 pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x00000000 pcibus_setup(1a): mode1res=0x00000000 (0x80000000) pcibus_setup(1b): mode1res=0x80000000 (0xff000001) pcibus_check: device 0 is there (id=20000e11) Probing for devices on the PCI bus: configuration mode 1 allows 32 devices. pci0:0: Compaq, device=0x2000, class=old (misc) [no driver assigned] map(10): mem32(1aa590) map(14): mem32(1aa590) map(18): mem32(1aa590) map(1c): mem32(1aa590) map(20): io(20000e10) vga0 rev 142 int a irq 11 on pci0:10 mapreg[10] type=0 addr=40000000 size=1000000. pci0:11: AMD, device=0x2000, class=network (ethernet) [no driver assigned] pci0:15: Compaq, device=0x0002, class=bridge (isa) [no driver assigned] pci0: uses 16777216 bytes of memory from 40000000 upto 40ffffff. wd0s1: type 0xa5, start 62, end = 613799, size 613738 : OK on the lnc0 card: with device lnc0 at isa? port 0x7000 net irq 10 drq 0 vector lncintr in the config file, the card is recognized as being on the VL-bus, and the ifconfig returns `Initialisation failed' >>Regards, STefan >> >> >>-- >> Stefan Esser, Zentrum fuer Paralleles Rechnen Tel: +49 221 > 4706021 >> Universitaet zu Koeln, Weyertal 80, 50931 Koeln FAX: +49 221 4705160 >> ============================================================================ >= >>= >> http://www.zpr.uni-koeln.de/~se > thanks, eric. -- erich@lodgenet.com erich@rrnet.com