From owner-freebsd-net Thu Nov 18 15: 8:14 1999 Delivered-To: freebsd-net@freebsd.org Received: from chmls05.mediaone.net (ne.mediaone.net [24.128.1.70]) by hub.freebsd.org (Postfix) with ESMTP id CD86B1557C for ; Thu, 18 Nov 1999 15:07:47 -0800 (PST) (envelope-from coady@egroups.com) Received: from ahp3 (ahp.ne.mediaone.net [24.128.184.250]) by chmls05.mediaone.net (8.8.7/8.8.7) with SMTP id SAA27658; Thu, 18 Nov 1999 18:07:45 -0500 (EST) From: "coady" To: Cc: "Stan Brown" Subject: RE: Road Runer cable modem network, and FreeBSD Date: Thu, 18 Nov 1999 18:07:46 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <199911182210.OAA08900@netcom.com> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-net@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I'm using FreeBSD 3.3 Release with a Road Runner (MediaOne) cable modem in the Boston area. I just set it up last week, so I'm a BSD newbie. It was not problem for me to get it working, once I was able to get FreeBSD to recognize my ethernet card. With the network card and cable modem both plugged in and working, I just selected DHCP when configuring the ethernet adapter in the sysinstall Networking --> Interfaces menu. It took about four seconds and sysintall bought up the correct parameters on the screen (IP address, host name, DNS server, etc.). If DHCP fails, sysinstall will bring up an error message and prompt you for the parameters. That happened to me when the "ep" driver in FreeBSD was not correctly recognizing the base address of my old 3COM ISA Etherlink III 3C509 based network adapter. During boot up, if DHCP fails, you will get a bunch of error messages at the tail end of the boot that relate to starting up network services. If DHCP succeeds, then "ifconfig -a" will show you the IP address you were assigned and "ping" etc. should work no problem. BTW, if you do have to run sysinstall more than once, you might want to check your /etc/rc.conf file to make sure it didn't get a bunch of junk added to it. At least in Boston, no login is required for the cable network. The only two places you need a login are: 1) checking your POP email 2) dialing into the network via a phone line (MediaOne calls this "remote access"). These situations are no different than any other ISP. Allen > -----Original Message----- > From: owner-freebsd-net@FreeBSD.ORG > [mailto:owner-freebsd-net@FreeBSD.ORG]On Behalf Of Stan Brown > Sent: Thursday, November 18, 1999 5:11 PM > To: freebsd-net@FreeBSD.ORG > Subject: Road Runer cable modem network, and FreeBSD > > > I am using a FreeBSD machine for my gateway to my cablemodem provider. > Works really great, and I am as pleased as punch with it. Thanks for > all the good work. > > Now a friend of mine has a cablemodem, and I want toset up a machine > for him. However he is on the Road Runer netowk (Time Warner?). It is > my understanding that the following are true of the: > > 1. They _require_ DHCP. > 2. They require some sort of "login" after establishing the network > layer connection. > > Bith of these are different from my cablemodem provider, and since he > is in a different cty, having the mahcine set up as closely as possibe > to a working system would be benefical. > > So, can anyone point me to a source of information on using FreeBSD for > this? > > Can anyone confir that they have this working? > > Thanks. > > -- > Stan Brown stanb@netcom.com 404-996-6955 > Factory Automation Systems > Atlanta Ga. > -- > Look, look, see Windows 95. Buy, lemmings, buy! > Pay no attention to that cliff ahead... Henry Spencer > (c) 1998 Stan Brown. Redistribution via the Microsoft Network is prohibited. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message