From nobody Thu Oct 19 11:56:13 2023 X-Original-To: bugs@mlmmj.nyi.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mlmmj.nyi.freebsd.org (Postfix) with ESMTP id 4SB5ld5VVNz4xMRk for ; Thu, 19 Oct 2023 11:56:13 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from mxrelay.nyi.freebsd.org (mxrelay.nyi.freebsd.org [IPv6:2610:1c1:1:606c::19:3]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256 client-signature RSA-PSS (4096 bits) client-digest SHA256) (Client CN "mxrelay.nyi.freebsd.org", Issuer "R3" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 4SB5ld18PJz4DYH for ; Thu, 19 Oct 2023 11:56:13 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) ARC-Seal: i=1; s=dkim; d=freebsd.org; t=1697716573; a=rsa-sha256; cv=none; b=H2a64GoDQ8TBaYu0YSsoxLNv+YC1N+fEQchlOc+Vftcc7kzGmn1RF4ElRLiKQvEmEgRlAP uY6NmPLbrn13KfcedapgIBc/UtfHarD4cUM3rot/0Cn4Js17odGkmIDuZF2FYXG0SfvFJK RHAqxwIxdD4zEfXiMDSmUhQ3tBXQTESqOfDBpYsN2AFft7sRTqGNHdRE9+5L0qqasxh4Q9 vhaa1+CxjoLy17AGLutKN3Uh4s9QJyw4Aqeswyhr+M18OiTKBvR8u+t91rC9+AcmLMDzsH NNbsS4j5LwYMEIyR61QBGagTZqHcoTIPCCeC/iY2Y1sQH2xkryV62kzfBp7RAA== ARC-Authentication-Results: i=1; mx1.freebsd.org; none ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=freebsd.org; s=dkim; t=1697716573; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=eLCiKVwVLsVVJJ6wLzzYvTgzMdfkQmxl+PqgDZbklc8=; b=Zx8jrXjNFXU8yH491mPU2JlbZDuzYigx+fW9xRcZrex85uKGc8uvQ3MjW9lx+JMnJiBkwp yjFAEuA49ord+QC/Yzm4tPbpzCl2Use2ky1Coq1Iiy5N5j3wRilNN7wVd25H5F5UkqYtt2 ojRRNlkqMoWTiTwsM9i5qho+4xwfOCxADpXM64MQZp0QA3NG6UXvZRoOzzxXOwMgRPxIUI 6RACAW0/nouTVJGAZH+PccT3ndl5CINKxfuq9wq7VC8dMP7PeqaIvqVeJ508O56vy88o8o tHEkvg7Ms3engahZCatBi5Senos9feYU6Ji6cSIwruyLsS9SY2mG1kDbegI5/Q== Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2610:1c1:1:606c::50:1d]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (Client did not present a certificate) by mxrelay.nyi.freebsd.org (Postfix) with ESMTPS id 4SB5ld0DDfzpR6 for ; Thu, 19 Oct 2023 11:56:13 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org ([127.0.1.5]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id 39JBuDSN093686 for ; Thu, 19 Oct 2023 11:56:13 GMT (envelope-from bugzilla-noreply@freebsd.org) Received: (from www@localhost) by kenobi.freebsd.org (8.15.2/8.15.2/Submit) id 39JBuDhE093685 for bugs@FreeBSD.org; Thu, 19 Oct 2023 11:56:13 GMT (envelope-from bugzilla-noreply@freebsd.org) X-Authentication-Warning: kenobi.freebsd.org: www set sender to bugzilla-noreply@freebsd.org using -f From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 173499] [panic] Reboot at setting of videomode by the utility vidcontrol(1) Date: Thu, 19 Oct 2023 11:56:13 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: changed X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: kern X-Bugzilla-Version: Unspecified X-Bugzilla-Keywords: crash X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: jiangjun12321@gmail.com X-Bugzilla-Status: Open X-Bugzilla-Resolution: X-Bugzilla-Priority: Normal X-Bugzilla-Assigned-To: bugs@FreeBSD.org X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: Message-ID: In-Reply-To: References: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated List-Id: Bug reports List-Archive: https://lists.freebsd.org/archives/freebsd-bugs List-Help: List-Post: List-Subscribe: List-Unsubscribe: Sender: owner-freebsd-bugs@freebsd.org MIME-Version: 1.0 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D173499 --- Comment #4 from Jaskie --- Content of my /var/run/dmesg.boot : Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.2-RELEASE-p4 GENERIC amd64 FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) CPU: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz (3093.07-MHz K8-class CPU) Origin=3D"GenuineIntel" Id=3D0x206a7 Family=3D0x6 Model=3D0x2a Steppi= ng=3D7 =20 Features=3D0xbfebfbff =20 Features2=3D0x1d9ae3bf AMD Features=3D0x28100800 AMD Features2=3D0x1 XSAVE Features=3D0x1 VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory =3D 4294967296 (4096 MB) avail memory =3D 4093161472 (3903 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: unblocking device. ioapic0: MADT APIC ID 2 !=3D hw id 0 ioapic0 irqs 0-23 Launching APs: 1 3 2 random: entropy device external interface kbd1 at kbdmux0 smbios0: at iomem 0xf0ce0-0xf0cfe smbios0: Version: 2.4, BCD Revision: 2.4 aesni0: No AES or SHA support. acpi0: acpi0: Power Button (fixed) cpu0: on acpi0 attimer0: port 0x40-0x43 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: port 0x70-0x73 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: irq 16 at device 1.0 on pci0 pci1: on pcib1 vgapci0: port 0xef00-0xef7f mem 0xf9000000-0xf9ffffff,0xe0000000-0xe7ffffff,0xee000000-0xefffffff irq 16 at device 0.0 on pci1 vgapci0: Boot video device hdac0: mem 0xfaffc000-0xfaffffff irq 17 at de= vice 0.1 on pci1 pci0: at device 22.0 (no driver attached) ehci0: mem 0xfbffe000-0xfbffe3ff ir= q 18 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 hdac1: mem 0xfbff4000-0xfbff7fff irq 22= at device 27.0 on pci0 pcib2: irq 16 at device 28.0 on pci0 pci2: on pcib2 pci2: at device 0.0 (no driver attached) pcib3: irq 16 at device 28.4 on pci0 pci3: on pcib3 re0: port 0xde00-0xdeff mem 0xfbeff000-0xfbefffff,0xfbef8000-0xfbefbfff irq 16 at dev= ice 0.0 on pci3 re0: Using 1 MSI-X message re0: Chip rev. 0x2c800000 re0: MAC rev. 0x00100000 miibus0: on re0 rgephy0: PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-F= DX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 50:e5:49:23:52:9d re0: netmap queues/slots: TX 1/256, RX 1/256 pcib4: irq 17 at device 28.5 on pci0 pci4: on pcib4 pcib5: irq 17 at device 0.0 on pci4 pci5: on pcib5 ehci1: mem 0xfbffd000-0xfbffd3ff ir= q 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 usbus1: 480Mbps High Speed USB v2.0 pcib6: at device 30.0 on pci0 pci6: on pcib6 isab0: at device 31.0 on pci0 isa0: on isab0 ahci0: port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb1f mem 0xfbffc000-0xfbffc7ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier supported ahcich0: at channel 0 on ahci0 ahcich1: at channel 1 on ahci0 ahcich4: at channel 4 on ahci0 ahcich5: at channel 5 on ahci0 ahciem0: on ahci0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ppc0: port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> WARNING: Device "consolectl" is Giant locked and may be deleted before Free= BSD 14.0. sc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP= 0900 on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. est0: on cpu0 Timecounter "TSC-low" frequency 1546486766 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: at cad 0 on hdac0 hdaa0: at nid 1 on hdacc0 pcm0: at nid 5 on hdaa0 hdacc1: at cad 1 on hdac0 hdaa1: at nid 1 on hdacc1 pcm1: at nid 5 on hdaa1 hdacc2: at cad 2 on hdac0 hdaa2: at nid 1 on hdacc2 pcm2: at nid 5 on hdaa2 hdacc3: at cad 3 on hdac0 hdaa3: at nid 1 on hdacc3 pcm3: at nid 5 on hdaa3 hdacc4: at cad 2 on hdac1 hdaa4: at nid 1 on hdacc4 pcm4: at nid 20 and 24,26 on hdaa4 pcm5: at nid 27 and 25 on hdaa4 Trying to mount root from zfs:zroot/ROOT/default []... ugen0.1: at usbus0 ugen1.1: at usbus1 uhub0 on usbus0 uhub0: on usbus0 uhub1 on usbus1 uhub1: on usbus1 ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 ses0: SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ATA8-ACS SATA 3.x device ada0: Serial Number WD-WCAV5R627509 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: ATA8-ACS SATA 2.x device ada1: Serial Number 6VD2E7V2 ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 305245MB (625142448 512 byte sectors) ses0: ada1 in 'Slot 01', SATA Slot: scbus1 target 0 uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered ugen0.2: at usbus0 uhub2 on uhub0 uhub2: on usbus0 ugen1.2: at usbus1 uhub3 on uhub1 uhub3: on usbus1 Root mount waiting for: usbus0 usbus1 uhub2: 4 ports with 4 removable, self powered uhub3: 6 ports with 6 removable, self powered ugen0.3: at usbus0 ukbd0 on uhub2 ukbd0: on usbus0 kbd2 at ukbd0 Root mount waiting for: usbus0 usbus1 ugen1.3: at usbus1 ugen0.4: at usbus0 Root mount waiting for: usbus0 usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device TOS= HIBA External USB 3.0 (0x0480:0xa202) ugen0.5: at usbus0 umass0 on uhub2 umass0: on usb= us0 umass0: SCSI over Bulk-Only; quirks =3D 0x0100 umass0:5:0: Attached to scbus5 (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 = 00 00=20 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) (probe0:umass-sim0:0:0:0): Error 22, Unretryable error da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 da0: Fixed Direct Access SPC-4 SCSI device da0: Serial Number 20151128002407C da0: 40.000MB/s transfers da0: 953869MB (1953525164 512 byte sectors) da0: quirks=3D0x2 WARNING: attempt to domain_add(netlink) after domainfinalize() [nl_generic] genl_register_family: Registered family nlctrl id 16 [nl_generic] genl_register_cmds: Adding cmd GETFAMILY(3) to family nlctrl nvidia0: on vgapci0 vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platform= s=20 390.154 Wed Jun 22 04:42:19 UTC 2022 Intel(R) Wireless WiFi based driver for FreeBSD ichsmb0: port 0x500-0x51f mem 0xfbffb000-0xfbffb0ff irq 18 at device 31.3 on pci0 smbus0: on ichsmb0 iwm0: mem 0xfbdfe000-0xfbdfffff irq 1= 6 at device 0.0 on pci2 iwm0: hw rev 0x160, fw ver 17.352738.0, address a0:d3:7a:12:a3:54 wlan0: Ethernet address: a0:d3:7a:12:a3:54 lo0: link state changed to UP re0: link state changed to DOWN wlan0: link state changed to UP uhid0 on uhub2 uhid0: on usbus0 ugen1.3: at usbus1 (disconnected) ugen1.3: at usbus1 ums0 on uhub2 ums0: on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=3D0 ugen1.3: at usbus1 (disconnected) ugen1.3: at usbus1 Security policy loaded: MAC/ntpd (mac_ntpd) wlan0: link state changed to DOWN wlan0: link state changed to UP wlan0: link state changed to DOWN wlan0: Ethernet address: a0:d3:7a:12:a3:54 wlan0: link state changed to UP Fatal trap 12: page fault while in kernel mode cpuid =3D 0; apic id =3D 00 fault virtual address =3D 0x0 fault code =3D supervisor read data, page not present instruction pointer =3D 0x20:0xffffffff831ccc12 stack pointer =3D 0x28:0xfffffe0062698bb0 frame pointer =3D 0x28:0xfffffe00aa95adb0 code segment =3D base 0x0, limit 0xfffff, type 0x1b =3D DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags =3D interrupt enabled, resume, IOPL =3D 0 current process =3D 12 (swi4: clock (0)) trap number =3D 12 panic: page fault cpuid =3D 0 time =3D 1697711538 KDB: stack backtrace: #0 0xffffffff80c53f45 at kdb_backtrace+0x65 #1 0xffffffff80c068c1 at vpanic+0x151 #2 0xffffffff80c06763 at panic+0x43 #3 0xffffffff810b1fa7 at trap_fatal+0x387 #4 0xffffffff810b1fff at trap_pfault+0x4f #5 0xffffffff81088fe8 at calltrap+0x8 Uptime: 1h22m36s Dumping 446 out of 4038 MB:..4%..11%..22%..33%..43%..51%..61%..72%..83%..94%---<>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.2-RELEASE-p4 GENERIC amd64 FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) CPU: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz (3093.14-MHz K8-class CPU) Origin=3D"GenuineIntel" Id=3D0x206a7 Family=3D0x6 Model=3D0x2a Steppi= ng=3D7 =20 Features=3D0xbfebfbff =20 Features2=3D0x1d9ae3bf AMD Features=3D0x28100800 AMD Features2=3D0x1 XSAVE Features=3D0x1 VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory =3D 4294967296 (4096 MB) avail memory =3D 4093165568 (3903 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: unblocking device. ioapic0: MADT APIC ID 2 !=3D hw id 0 ioapic0 irqs 0-23 Launching APs: 1 3 2 random: entropy device external interface kbd1 at kbdmux0 smbios0: at iomem 0xf0ce0-0xf0cfe smbios0: Version: 2.4, BCD Revision: 2.4 aesni0: No AES or SHA support. acpi0: acpi0: Power Button (fixed) cpu0: on acpi0 attimer0: port 0x40-0x43 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: port 0x70-0x73 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: irq 16 at device 1.0 on pci0 pci1: on pcib1 vgapci0: port 0xef00-0xef7f mem 0xf9000000-0xf9ffffff,0xe0000000-0xe7ffffff,0xee000000-0xefffffff irq 16 at device 0.0 on pci1 vgapci0: Boot video device hdac0: mem 0xfaffc000-0xfaffffff irq 17 at de= vice 0.1 on pci1 pci0: at device 22.0 (no driver attached) ehci0: mem 0xfbffe000-0xfbffe3ff ir= q 18 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 hdac1: mem 0xfbff4000-0xfbff7fff irq 22= at device 27.0 on pci0 pcib2: irq 16 at device 28.0 on pci0 pci2: on pcib2 pci2: at device 0.0 (no driver attached) pcib3: irq 16 at device 28.4 on pci0 pci3: on pcib3 re0: port 0xde00-0xdeff mem 0xfbeff000-0xfbefffff,0xfbef8000-0xfbefbfff irq 16 at dev= ice 0.0 on pci3 re0: Using 1 MSI-X message re0: Chip rev. 0x2c800000 re0: MAC rev. 0x00100000 miibus0: on re0 rgephy0: PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-F= DX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 50:e5:49:23:52:9d re0: netmap queues/slots: TX 1/256, RX 1/256 pcib4: irq 17 at device 28.5 on pci0 pci4: on pcib4 pcib5: irq 17 at device 0.0 on pci4 pci5: on pcib5 ehci1: mem 0xfbffd000-0xfbffd3ff ir= q 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 usbus1: 480Mbps High Speed USB v2.0 pcib6: at device 30.0 on pci0 pci6: on pcib6 isab0: at device 31.0 on pci0 isa0: on isab0 ahci0: port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb1f mem 0xfbffc000-0xfbffc7ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier supported ahcich0: at channel 0 on ahci0 ahcich1: at channel 1 on ahci0 ahcich4: at channel 4 on ahci0 ahcich5: at channel 5 on ahci0 ahciem0: on ahci0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ppc0: port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> WARNING: Device "consolectl" is Giant locked and may be deleted before Free= BSD 14.0. sc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP= 0900 on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. est0: on cpu0 Timecounter "TSC-low" frequency 1546486797 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: at cad 0 on hdac0 hdaa0: at nid 1 on hdacc0 pcm0: at nid 5 on hdaa0 hdacc1: at cad 1 on hdac0 hdaa1: at nid 1 on hdacc1 pcm1: at nid 5 on hdaa1 hdacc2: at cad 2 on hdac0 hdaa2: at nid 1 on hdacc2 pcm2: at nid 5 on hdaa2 hdacc3: at cad 3 on hdac0 hdaa3: at nid 1 on hdacc3 pcm3: at nid 5 on hdaa3 hdacc4: at cad 2 on hdac1 hdaa4: at nid 1 on hdacc4 pcm4: at nid 20 and 24,26 on hdaa4 pcm5: at nid 27 and 25 on hdaa4 Trying to mount root from zfs:zroot/ROOT/default []... ugen0.1: at usbus0 ugen1.1: at usbus1 uhub0 on usbus1 uhub1 on usbus0 uhub1: on usbus0 uhub0: on usbus1 ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 ses0: SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ATA8-ACS SATA 3.x device ada0: Serial Number WD-WCAV5R627509 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: ATA8-ACS SATA 2.x device ada1: Serial Number 6VD2E7V2 ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 305245MB (625142448 512 byte sectors) ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered ugen0.2: at usbus0 uhub2 on uhub1 uhub2: on usbus0 ugen1.2: at usbus1 uhub3 on uhub0 uhub3: on usbus1 Root mount waiting for: usbus0 usbus1 uhub2: 4 ports with 4 removable, self powered uhub3: 6 ports with 6 removable, self powered ugen0.3: at usbus0 ukbd0 on uhub2 ukbd0: on usbus0 kbd2 at ukbd0 Root mount waiting for: usbus0 usbus1 ugen1.3: at usbus1 ugen0.4: at usbus0 Root mount waiting for: usbus0 usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device TOS= HIBA External USB 3.0 (0x0480:0xa202) ugen0.5: at usbus0 umass0 on uhub2 umass0: on usb= us0 umass0: SCSI over Bulk-Only; quirks =3D 0x0100 umass0:5:0: Attached to scbus5 (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 = 00 00=20 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) (probe0:umass-sim0:0:0:0): Error 22, Unretryable error da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 da0: Fixed Direct Access SPC-4 SCSI device da0: Serial Number 20151128002407C da0: 40.000MB/s transfers da0: 953869MB (1953525164 512 byte sectors) da0: quirks=3D0x2 WARNING: attempt to domain_add(netlink) after domainfinalize() [nl_generic] genl_register_family: Registered family nlctrl id 16 [nl_generic] genl_register_cmds: Adding cmd GETFAMILY(3) to family nlctrl nvidia0: on vgapci0 vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platform= s=20 390.154 Wed Jun 22 04:42:19 UTC 2022 Intel(R) Wireless WiFi based driver for FreeBSD ichsmb0: port 0x500-0x51f mem 0xfbffb000-0xfbffb0ff irq 18 at device 31.3 on pci0 smbus0: on ichsmb0 iwm0: mem 0xfbdfe000-0xfbdfffff irq 1= 6 at device 0.0 on pci2 iwm0: hw rev 0x160, fw ver 17.352738.0, address a0:d3:7a:12:a3:54 wlan0: Ethernet address: a0:d3:7a:12:a3:54 lo0: link state changed to UP re0: link state changed to DOWN uhid0 on uhub2 uhid0: on usbus0 ums0 on uhub2 ums0: on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=3D0 ng_ubt: HCI command 0x0c03 timed out ng_ubt: HCI command 0x0c03 timed out wlan0: link state changed to UP Security policy loaded: MAC/ntpd (mac_ntpd) wlan0: link state changed to DOWN wlan0: Ethernet address: a0:d3:7a:12:a3:54 wlan0: link state changed to UP module_register: cannot register vesa from vesa.ko; already loaded from ker= nel Module vesa failed to register: 17 Fatal trap 12: page fault while in kernel mode cpuid =3D 0; apic id =3D 00 fault virtual address =3D 0x0 fault code =3D supervisor read data, page not present instruction pointer =3D 0x20:0xffffffff831ccc12 stack pointer =3D 0x28:0xfffffe0062698bb0 frame pointer =3D 0x28:0xfffffe00b3930db0 code segment =3D base 0x0, limit 0xfffff, type 0x1b =3D DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags =3D interrupt enabled, resume, IOPL =3D 0 current process =3D 12 (swi4: clock (0)) trap number =3D 12 panic: page fault cpuid =3D 0 time =3D 1697712252 KDB: stack backtrace: #0 0xffffffff80c53f45 at kdb_backtrace+0x65 #1 0xffffffff80c068c1 at vpanic+0x151 #2 0xffffffff80c06763 at panic+0x43 #3 0xffffffff810b1fa7 at trap_fatal+0x387 #4 0xffffffff810b1fff at trap_pfault+0x4f #5 0xffffffff81088fe8 at calltrap+0x8 Uptime: 11m4s Dumping 452 out of 4038 MB:..4%..11%..22%..32%..43%..54%..61%..71%..82%..93%---<>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.2-RELEASE-p4 GENERIC amd64 FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) CPU: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz (3093.06-MHz K8-class CPU) Origin=3D"GenuineIntel" Id=3D0x206a7 Family=3D0x6 Model=3D0x2a Steppi= ng=3D7 =20 Features=3D0xbfebfbff =20 Features2=3D0x1d9ae3bf AMD Features=3D0x28100800 AMD Features2=3D0x1 XSAVE Features=3D0x1 VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory =3D 4294967296 (4096 MB) avail memory =3D 4093161472 (3903 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: unblocking device. ioapic0: MADT APIC ID 2 !=3D hw id 0 ioapic0 irqs 0-23 Launching APs: 1 3 2 random: entropy device external interface kbd1 at kbdmux0 smbios0: at iomem 0xf0ce0-0xf0cfe smbios0: Version: 2.4, BCD Revision: 2.4 aesni0: No AES or SHA support. acpi0: acpi0: Power Button (fixed) cpu0: on acpi0 attimer0: port 0x40-0x43 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: port 0x70-0x73 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: irq 16 at device 1.0 on pci0 pci1: on pcib1 vgapci0: port 0xef00-0xef7f mem 0xf9000000-0xf9ffffff,0xe0000000-0xe7ffffff,0xee000000-0xefffffff irq 16 at device 0.0 on pci1 vgapci0: Boot video device hdac0: mem 0xfaffc000-0xfaffffff irq 17 at de= vice 0.1 on pci1 pci0: at device 22.0 (no driver attached) ehci0: mem 0xfbffe000-0xfbffe3ff ir= q 18 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 hdac1: mem 0xfbff4000-0xfbff7fff irq 22= at device 27.0 on pci0 pcib2: irq 16 at device 28.0 on pci0 pci2: on pcib2 pci2: at device 0.0 (no driver attached) pcib3: irq 16 at device 28.4 on pci0 pci3: on pcib3 re0: port 0xde00-0xdeff mem 0xfbeff000-0xfbefffff,0xfbef8000-0xfbefbfff irq 16 at dev= ice 0.0 on pci3 re0: Using 1 MSI-X message re0: Chip rev. 0x2c800000 re0: MAC rev. 0x00100000 miibus0: on re0 rgephy0: PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-F= DX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 50:e5:49:23:52:9d re0: netmap queues/slots: TX 1/256, RX 1/256 pcib4: irq 17 at device 28.5 on pci0 pci4: on pcib4 pcib5: irq 17 at device 0.0 on pci4 pci5: on pcib5 ehci1: mem 0xfbffd000-0xfbffd3ff ir= q 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 usbus1: 480Mbps High Speed USB v2.0 pcib6: at device 30.0 on pci0 pci6: on pcib6 isab0: at device 31.0 on pci0 isa0: on isab0 ahci0: port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb1f mem 0xfbffc000-0xfbffc7ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier supported ahcich0: at channel 0 on ahci0 ahcich1: at channel 1 on ahci0 ahcich4: at channel 4 on ahci0 ahcich5: at channel 5 on ahci0 ahciem0: on ahci0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ppc0: port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> WARNING: Device "consolectl" is Giant locked and may be deleted before Free= BSD 14.0. sc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP= 0900 on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14. est0: on cpu0 Timecounter "TSC-low" frequency 1546486689 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: at cad 0 on hdac0 hdaa0: at nid 1 on hdacc0 pcm0: at nid 5 on hdaa0 hdacc1: at cad 1 on hdac0 hdaa1: at nid 1 on hdacc1 pcm1: at nid 5 on hdaa1 hdacc2: at cad 2 on hdac0 hdaa2: at nid 1 on hdacc2 pcm2: at nid 5 on hdaa2 hdacc3: at cad 3 on hdac0 hdaa3: at nid 1 on hdacc3 pcm3: at nid 5 on hdaa3 hdacc4: at cad 2 on hdac1 hdaa4: at nid 1 on hdacc4 pcm4: at nid 20 and 24,26 on hdaa4 pcm5: at nid 27 and 25 on hdaa4 Trying to mount root from zfs:zroot/ROOT/default []... ugen0.1: at usbus0 ugen1.1: at usbus1 uhub0 on usbus0 uhub0: on usbus0 uhub1 on usbus1 uhub1: on usbus1 ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 ses0: SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ATA8-ACS SATA 3.x device ada0: Serial Number WD-WCAV5R627509 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ses0: ada0 in 'Slot 00', SATA Slot: scbus0 target 0 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: ATA8-ACS SATA 2.x device ada1: Serial Number 6VD2E7V2 ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 305245MB (625142448 512 byte sectors) ses0: ada1 in 'Slot 01', SATA Slot: scbus1 target 0 uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered ugen0.2: at usbus0 uhub2 on uhub0 uhub2: on usbus0 ugen1.2: at usbus1 uhub3 on uhub1 uhub3: on usbus1 Root mount waiting for: usbus0 usbus1 uhub2: 4 ports with 4 removable, self powered uhub3: 6 ports with 6 removable, self powered ugen0.3: at usbus0 ukbd0 on uhub2 ukbd0: on usbus0 kbd2 at ukbd0 Root mount waiting for: usbus0 usbus1 ugen1.3: at usbus1 ugen0.4: at usbus0 Root mount waiting for: usbus0 usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device TOS= HIBA External USB 3.0 (0x0480:0xa202) ugen0.5: at usbus0 umass0 on uhub2 umass0: on usb= us0 umass0: SCSI over Bulk-Only; quirks =3D 0x0100 umass0:5:0: Attached to scbus5 (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 = 00 00=20 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) (probe0:umass-sim0:0:0:0): Error 22, Unretryable error da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 da0: Fixed Direct Access SPC-4 SCSI device da0: Serial Number 20151128002407C da0: 40.000MB/s transfers da0: 953869MB (1953525164 512 byte sectors) da0: quirks=3D0x2 WARNING: attempt to domain_add(netlink) after domainfinalize() [nl_generic] genl_register_family: Registered family nlctrl id 16 [nl_generic] genl_register_cmds: Adding cmd GETFAMILY(3) to family nlctrl nvidia0: on vgapci0 vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platform= s=20 390.154 Wed Jun 22 04:42:19 UTC 2022 Intel(R) Wireless WiFi based driver for FreeBSD ichsmb0: port 0x500-0x51f mem 0xfbffb000-0xfbffb0ff irq 18 at device 31.3 on pci0 smbus0: on ichsmb0 iwm0: mem 0xfbdfe000-0xfbdfffff irq 1= 6 at device 0.0 on pci2 iwm0: hw rev 0x160, fw ver 17.352738.0, address a0:d3:7a:12:a3:54 wlan0: Ethernet address: a0:d3:7a:12:a3:54 lo0: link state changed to UP re0: link state changed to DOWN wlan0: link state changed to UP uhid0 on uhub2 uhid0: on usbus0 ugen1.3: at usbus1 (disconnected) ugen1.3: at usbus1 ums0 on uhub2 ums0: on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=3D0 ugen1.3: at usbus1 (disconnected) ugen1.3: at usbus1 --=20 You are receiving this mail because: You are the assignee for the bug.=