Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 13 Dec 2006 07:18:44 -0500
From:      Mike Tancsa <mike@sentex.net>
To:        Ian FREISLICH <if@hetzner.co.za>
Cc:        FreeBSD current mailing list <Current@freebsd.org>
Subject:   Re: PCI sio card 
Message-ID:  <200612131220.kBDCK1Sh034054@lava.sentex.ca>
In-Reply-To: <E1GuNjJ-0000Yf-Bd@hetzner.co.za>
References:  <E1GuNjJ-0000Yf-Bd@hetzner.co.za>

next in thread | previous in thread | raw e-mail | index | archive | help
At 01:36 AM 12/13/2006, Ian FREISLICH wrote:
> > used to be an issue of loading puc as a kld. Try statically compiling
> > it in the kernel along with device uart (not sio) and see if
> > /dev/cuau# devices come up.
>
>I've tried compiling puc+scc+uart into the kernel.  I've tried this
>with and without sio and scc in all the permutations.  It detects the
>puc, but I get no cuad devices.
\

It should come up as /dev/cuau# not cuad.  With puc and uart in the 
kernel, what does the dmesg show ?

         ---Mike 




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200612131220.kBDCK1Sh034054>