Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 4 Jan 2018 14:23:39 +0800
From:      Bin LIU <BinLiu@greencache.com>
To:        Gary Palmer <gpalmer@freebsd.org>
Cc:        freebsd-scsi@freebsd.org
Subject:   Re: Driver support for Dell PERC H740p adapter
Message-ID:  <CAPpP3%2B9HE2a1mPeZ6R1m3xOaot%2Bwmd6bQpN5WUhtQXzheeegww@mail.gmail.com>
In-Reply-To: <20180102171128.GA68019@in-addr.com>
References:  <CAPpP3%2B_OYt2SVOUAz4E8XKvEMu2qt3qovNfAVNKg3nWT2sJAWA@mail.gmail.com> <20180102171128.GA68019@in-addr.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi Gary,

Thanks for your suggestion. The official Broadcom driver works.

# dmesg
...
mrsas0: <AVAGO Harpoon SAS Controller> port 0xc000-0xc0ff mem
0xe1000000-0xe10fffff,0xe1100000-0xe11fffff,0xe1200000-0xe12fffff irq 88 at
device 0.0 numa-domain 1 on pci11
mrsas0: Using MSI-X with 32 number of vectors
mrsas0: FW supports <128> MSIX vector,Online CPU 32 Current MSIX <32>
mrsas0: NVME page size  : (0)
mrsas0: FW supports JBOD Map
mrsas0: FW supports JBOD Map Ext
mrsas0: Jbod map is supported
mrsas0: VD created target ID: 0x0
mrsas0: FW supports: UnevenSpanSupport=3D1
mrsas0: MSI-x interrupts setup success
mrsas0: Disestablish mrsas intr hook
da0 at mrsas0 bus 0 scbus16 target 0 lun 0
da0: <DELL PERC H740P Adp 5.00> Fixed Direct Access SPC-3 SCSI device
da0: Serial Number 0069ca6e99bb35dc21005caf2b68888
da0: 150.000MB/s transfers
da0: 571776MB (1170997248 512 byte sectors)
...


Regards,

Bin

On Wed, Jan 3, 2018 at 1:11 AM, Gary Palmer <gpalmer@freebsd.org> wrote:

> On Mon, Jan 01, 2018 at 03:13:57PM +0800, Bin LIU wrote:
> > Hi,
> >
> > I'm not sure if there is any plan to support PERC H740 adapter, which i=
s
> > widely deployed with Dell 14G server family.
> >
> > # pciconf -lv
> > none245@pci0:175:0:0:   class=3D0x010400 card=3D0x1fcb1028 chip=3D0x001=
61000
> > rev=3D0x01 hdr=3D0x00
> >     vendor     =3D 'LSI Logic / Symbios Logic'
> >     device     =3D 'MegaRAID Tri-Mode SAS3508'
> >     class      =3D mass storage
> >     subclass   =3D RAID
> >
> > https://pci-ids.ucw.cz/read/PC/1000/0016
> >
> > As far as I know, mpr(4) does not support this device yet.
> >
> > Thanks for any suggestion and news.
>
> Have you tried the official Broadcom driver?
>
> https://www.broadcom.com/products/storage/raid-
> controllers/megaraid-9460-8i#downloads
>
> Regards,
>
> Gary
>



--=20
B.R
Bin LIU/=E5=88=98=E6=96=8C
+86-13628677262
+86-27-87737962
GreenCache Team,
Gforce Inc.

*Confidentiality Notice: This e-mail message, including any attachments, is
for the sole use of the intended recipient(s) and may contain confidential
or proprietary information. Any unauthorized review, use, disclosure or
distribution is prohibited.*



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAPpP3%2B9HE2a1mPeZ6R1m3xOaot%2Bwmd6bQpN5WUhtQXzheeegww>