Date: Wed, 08 Oct 1997 11:32:19 +0200 From: Miroslav Kes <mira@rockwell.cz> To: freebsd-questions@freebsd.org Subject: 2.2.2: wdc0 not found at 0x1f0 :-( Message-ID: <343B5323.527891DB@rockwell.cz>
next in thread | raw e-mail | index | archive | help
Hello,
I have PC with PCI bus and (among others) onboard IDE hard disk
controller. There is only one device connected to it - ACER 16x CDROM.
It is set as the master on that controller. My hard drives are SCSI and
there is no problem. Everything goes OK during startup but the FreeBSD
(2.2.2 from Walnut Creek CDROM) cannot find the wdc0 controller:
jean:/usr/home/mira> dmesg
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 2.2.2-RELEASE #0: Wed Oct 8 10:32:47 CEST 1997
root@jean.research.rockwell.cz:/usr/src/sys/compile/LOCAL
CPU: Pentium Pro (198.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping=9
Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,<b11>,MTRR,PGE,MCA,CMOV>
real memory = 33554432 (32768K bytes)
avail memory = 30560256 (29844K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82440FX (Natoma) PCI and memory controller> rev 2 on pci0:0
fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 2 int a irq 10 on
pci0:10
fxp0: Ethernet address 00:a0:c9:55:f1:62
ahc0 <Adaptec aic7880 Ultra SCSI host adapter> rev 0 int a irq 11 on
pci0:13
ahc0: Using left over BIOS settings
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc0 waiting for scsi devices to settle
(ahc0:0:0): "SEAGATE ST32155N 0594" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 2049MB (4197405 512 byte sectors)
(ahc0:1:0): "SEAGATE ST32155N 0594" type 0 fixed SCSI 2
sd1(ahc0:1:0): Direct-Access 2049MB (4197405 512 byte sectors)
(ahc0:5:0): "WangDAT Model 3100 02.2" type 1 removable SCSI 2
st0(ahc0:5:0): Sequential-Access density code 0x13, drive empty
chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:18:0
chip2 <Intel 82371SB IDE interface> rev 0 on pci0:18:1
vga0 <VGA-compatible display device> rev 34 on pci0:20
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 9 on isa
ed0: address 00:40:05:29:62:ca, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: device ID 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
Originaly, I got this PC with the OEM Windows NT 4.0 server installed.
Before I started installation of the FreeBSD, which is now the only one
operating system on that machine, I checked the installed hardware and
drivers in the NT and I found the CDROM on:
"IDE CD-ROM (ATAPI 1.2) Dual channel PCI IDE 1F0-1F7 IRQ 14"
>From this point of view the I/O address seems to be correct.
Does anybody have idea how can I solve this problem?
Thanks
Mira
-----------------------------------------------------------
| Miroslav Kes |
|---------------------------------------------------------|
| Rockwell Automation Ltd. | tel.: (+420) 2 2425 6913 |
| Research Center Prague | fax: (+420) 2 250467 |
| Americka 22 | e-mail: mira@rockwell.cz |
| 120 00 Praha 2 - Vinohrady | |
| Czech Republic | |
-----------------------------------------------------------
P.S.
My kernel configuration file looks like this:
machine "i386"
cpu "I686_CPU"
ident LOCAL
maxusers 20
#options MATH_EMULATE #Support for x87
emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP
THIS!]
options SYSVSHM
options SCSI_DELAY=15 #Be pessimistic about Joe SCSI
device
options BOUNCE_BUFFERS #include support for DMA bounce
buffers
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
config kernel root on sd0
controller isa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector
fdintr
disk fd0 at fdc0 drive 0
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
#disk wd0 at wdc0 drive 0
#disk wd1 at wdc0 drive 1
#controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
#disk wd2 at wdc1 drive 0
#disk wd3 at wdc1 drive 1
options ATAPI #Enable ATAPI support for IDE bus
options ATAPI_STATIC #Don't do it as an LKM
device wcd0 #IDE CD-ROM
# A single entry for any of these controllers (ncr, ahb, ahc, amd) is
# sufficient for any number of installed devices.
controller ahc0
controller scbus0
device sd0
#device od0 #See LINT for possible `od' options.
device st0
#device cd0 #Only need one of these, the code dynamically
grows
#device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
#options PCVT_FREEBSD=210 # pcvt running on
FreeBSD >= 2.0.5
options XSERVER # include code for XFree86
#options FAT_CURSOR # start with block
cursor
# Mandatory, don't remove
device npx0 at isa? port "IO_NPX" flags 0x1 irq 13 vector
npxintr
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
#device sio2 at isa? disable port "IO_COM3" tty irq 5 vector
siointr
#device sio3 at isa? disable port "IO_COM4" tty irq 9 vector
siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
#device lpt1 at isa? port? tty
#device mse0 at isa? port 0x23c tty irq 5 vector mseintr
device psm0 at isa? port "IO_KBD" conflicts tty irq 12
vector psmintr
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device de0
device fxp0
#device vx0
device ed0 at isa? port 0x300 net irq 9 iomem 0xd8000 vector edintr
pseudo-device loop
pseudo-device ether
pseudo-device log
#pseudo-device sl 1
# ijppp uses tun instead of ppp device
#pseudo-device ppp 1
pseudo-device vn 1
#pseudo-device tun 1
pseudo-device pty 16
pseudo-device bpfilter 2
pseudo-device gzip # Exec gzipped a.out's
# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options KTRACE #kernel tracing
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?343B5323.527891DB>