Date: Wed, 13 Dec 2006 21:32:35 +0900 From: Pyun YongHyeon <pyunyh@gmail.com> To: Andre Guibert de Bruet <andy@siliconlandmark.com> Cc: freebsd-current@freebsd.org Subject: Re: Call for Marvell/SysKonnect Yukon II Gigabit Ethernet testers. Message-ID: <20061213123235.GC13506@cdnetworks.co.kr> In-Reply-To: <20061213041018.I56950@lexi.siliconlandmark.com> References: <20060926002916.GA5975@cdnetworks.co.kr> <ekikdg$aqu$1@sea.gmane.org> <20061129013052.GC71523@cdnetworks.co.kr> <457DF011.9010701@FreeBSD.org> <20061212020023.GA9698@cdnetworks.co.kr> <6BC2A5CB-AC24-4EB3-8C6C-A4D0A5EA7183@siliconlandmark.com> <20061212124428.GB9698@cdnetworks.co.kr> <20061213023325.P56950@lexi.siliconlandmark.com> <20061213081134.GB13506@cdnetworks.co.kr> <20061213041018.I56950@lexi.siliconlandmark.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Dec 13, 2006 at 04:21:29AM -0500, Andre Guibert de Bruet wrote: > > On Wed, 13 Dec 2006, Pyun YongHyeon wrote: > > >On Wed, Dec 13, 2006 at 02:35:43AM -0500, Andre Guibert de Bruet wrote: > > > >> Sorry for the late reply. This is the output, including your latest > >> round of changes (As committed): > >> > >> dmesg: > >> > >> mskc0: <Marvell Yukon 88E8050 Gigabit Ethernet> port 0xd800-0xd8ff mem > >> 0xfcffc000-0xfcffffff irq 16 at device 0.0 on pci6 > >> mskc0: [FAST] > >> msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x01> on mskc0 > >> msk0: Ethernet address: 00:04:23:b0:d2:cf > >> miibus0: <MII bus> on msk0 > >> ukphy0: <Generic IEEE 802.3u media interface> on miibus0 > > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > >> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > >> 1000baseT-FDX, auto > > > >Hmm, it seems that e1000phy(4) failed to attach your PHY. > >I'd like to know your PHY model/revision number.(You can set > >bootverbose option and ukphy(4) will show OUI/model/revision > >for your PHY.) With ukphy(4) you wouldn't get auto-crossover > >feature or manual media selection work. > > I guess it looks better when I enable e1000phy (I was testing a dc-based > card for a bit and forgot to re-enable it). > > mskc0: <Marvell Yukon 88E8050 Gigabit Ethernet> port 0xd800-0xd8ff mem > 0xfcffc000-0xfcffffff irq 16 at device 0.0 on pci6 > mskc0: MSI count : 2 > mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfcffc000 > mskc0: RAM buffer size : 48KB > mskc0: Port 0 : Rx Queue 32KB(0x00000000:0x00007fff) > mskc0: Port 0 : Tx Queue 16KB(0x00008000:0x0000bfff) > msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x01> on mskc0 > msk0: bpf attached > msk0: Ethernet address: 00:04:23:b0:d2:cf > miibus0: <MII bus> on msk0 > e1000phy0: <Marvell 88E1111 Gigabit PHY> on miibus0 > e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, > auto Looks good. That 88E1111 was what I want to see. > > Do you still need the information for this PHY? boot -v doesn't seem to No. > provide this information when e1000phy is attached (It may be a good idea Because e1000phy(4) was used for the PHY there is no output for OUI/model/revision(e1000phy(4) already printed it anyway). > print this information out for debugging, anyway). > > Andy -- Regards, Pyun YongHyeon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061213123235.GC13506>