Date: Wed, 26 Nov 2008 00:02:15 +1100 From: "Jan Mikkelsen" <janm@transactionware.com> To: <freebsd-net@freebsd.org> Subject: [em] 7.1-PRE, one em port works, one fails, no problem on 6.3-p1 Message-ID: <F414FED1A0AB4629A4BA123733C0E857@STUDYPC>
next in thread | raw e-mail | index | archive | help
Hi, On a machine with a Supermicro X7DB8 board I get this error on startup: em1: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0x3020-0x303f mem = 0xd8420000-0xd843ffff irq 19 at device 0.1 on pci6 em1: Using MSI interrupt em1: Hardware Initialization Failed em1: Unable to initialize the hardware device_attach: em1 attach returned 5 There is no management card in this particular machine, and em0 on the = same motherboard is fine. I can see a few similar problems in the archives, = but I don't see a definitive solution. The same machine runs fine with = 6.3-p1. Dmesg below. Any suggestions? Thanks, Jan Mikkelsen Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-PRERELEASE #0: Tue Nov 25 10:07:25 EST 2008 =20 root@dm.transactionware.com:/home/janm/p4/freebsd-image-std-2008.2/work/b= ase -freebsd/home/janm/p4/freebsd-image-std-2008.2/FreeBSD/src/sys/TW-SMP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU 5140 @ 2.33GHz (2333.35-MHz = K8-class CPU) Origin =3D "GenuineIntel" Id =3D 0x6f6 Stepping =3D 6 =20 Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> =20 Features2=3D0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDC= M,DCA > AMD Features=3D0x20100800<SYSCALL,NX,LM> AMD Features2=3D0x1<LAHF> Cores per package: 2 usable memory =3D 4280651776 (4082 MB) avail memory =3D 4117843968 (3927 MB) ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, = RF5413) acpi0: <SMCI SMCISLP2> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 pci4: <ACPI PCI bus> on pcib4 ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2400-0x24ff,0x2000-0x20ff mem 0xd8500000-0xd8501fff irq 16 at device = 2.0 on pci4 ahd0: [ITHREAD] aic7902: Ultra320 Wide Channel A, SCSI Id=3D7, PCI-X 67-100Mhz, 512 SCBs ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2c00-0x2cff,0x2800-0x28ff mem 0xd8502000-0xd8503fff irq 17 at device = 2.1 on pci4 ahd1: [ITHREAD] aic7902: Ultra320 Wide Channel B, SCSI Id=3D7, PCI-X 67-100Mhz, 512 SCBs pcib5: <ACPI PCI-PCI bridge> at device 0.2 on pci3 pci5: <ACPI PCI bus> on pcib5 bge0: <Altima Gigabit Ethernet Controller, ASIC rev. 0x105> mem 0xd8600000-0xd860ffff irq 16 at device 1.0 on pci5 miibus0: <MII bus> on bge0 brgphy0: <BCM5701 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:40:f4:66:b1:56 bge0: [ITHREAD] pcib6: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2 pci6: <ACPI PCI bus> on pcib6 em0: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0x3000-0x301f mem 0xd8400000-0xd841ffff irq 18 at device 0.0 on pci6 em0: Using MSI interrupt em0: [FILTER] em0: Ethernet address: 00:30:48:31:67:86 em1: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0x3020-0x303f mem 0xd8420000-0xd843ffff irq 19 at device 0.1 on pci6 em1: Using MSI interrupt em1: Hardware Initialization Failed em1: Unable to initialize the hardware device_attach: em1 attach returned 5 pcib7: <ACPI PCI-PCI bridge> at device 0.3 on pci1 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci8: <ACPI PCI bus> on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci9: <ACPI PCI bus> on pcib9 pcib10: <PCI-PCI bridge> at device 0.0 on pci9 pci10: <PCI bus> on pcib10 arcmsr0: <Areca SATA Host Adapter RAID Controller (RAID6 capable) > mem 0xd8900000-0xd8900fff,0xd8000000-0xd83fffff irq 16 at device 14.0 = on pci10 ARECA RAID ADAPTER0: Driver Version 1.20.00.15 2007-10-07=20 ARECA RAID ADAPTER0: FIRMWARE VERSION V1.42 2006-10-13=20 arcmsr0: [ITHREAD] pcib11: <PCI-PCI bridge> at device 0.2 on pci9 pci11: <PCI bus> on pcib11 pcib12: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci12: <ACPI PCI bus> on pcib12 uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port = 0x1800-0x181f irq 17 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port = 0x1820-0x183f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port = 0x1840-0x185f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xd8c00000-0xd8c003ff irq = 17 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 63XXESB USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci13: <ACPI PCI bus> on pcib13 vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xd0000000-0xd7ffffff,0xd8800000-0xd880ffff irq 18 at device 1.0 on = pci13 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on = acpi0 fdc0: [FILTER] ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 728072806000728 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 728072806000728 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 728072806000728 device_attach: est2 attach returned 6 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 728072806000728 device_attach: est3 attach returned 6 p4tcc3: <CPU Frequency Thermal Control> on cpu3 orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on = isa0 Timecounters tick every 1.000 msec acd0: DVDR <PIONEER DVD-RW DVR-111D/1.23> at ata0-master UDMA66 Waiting 5 seconds for SCSI devices to settle (probe46:arcmsr0:0:16:0): inquiry data fails comparison at DV1 step da0 at arcmsr0 bus 0 target 0 lun 0 da0: <Areca ARC-1220-VOL#00 R001> Fixed Direct Access SCSI-5 device=20 da0: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) da0: 77247MB (158201856 512 byte sectors: 255H 63S/T 9847C) da1 at arcmsr0 bus 0 target 1 lun 0 da1: <Areca ARC-1220-VOL#01 R001> Fixed Direct Access SCSI-5 device=20 da1: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) da1: 953673MB (1953122304 512 byte sectors: 255H 63S/T 121576C) da2 at arcmsr0 bus 0 target 2 lun 0 da2: <Areca ARC-1220-VOL#02 R001> Fixed Direct Access SCSI-5 device=20 da2: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) da2: 800131MB (1638669312 512 byte sectors: 255H 63S/T 102002C) sa0 at ahd1 bus 0 target 6 lun 0 sa0: <SEAGATE DAT 04106-XXX 7600> Removable Sequential Access SCSI-2 device=20 sa0: 10.000MB/s transfers (10.000MHz, offset 15) SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Trying to mount root from ufs:/dev/da0s1a This module (opensolaris) contains code covered by the Common Development and Distribution License (CDDL) see http://opensolaris.org/os/licensing/opensolaris_license/ WARNING: ZFS is considered to be an experimental feature in FreeBSD. ZFS filesystem version 6 ZFS storage pool version 6 em0: link state changed to UP bge0: link state changed to UP
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F414FED1A0AB4629A4BA123733C0E857>