Date: Thu, 13 May 2004 19:04:11 +0200 From: Pierre Beyssac <beyssac@enst.fr> To: freebsd-sparc64@freebsd.org Cc: sos@freebsd.org Subject: can't install on Blade 150 (WRITE_DMA timeout) Message-ID: <20040513170411.GA76991@bofh.enst.fr>
next in thread | raw e-mail | index | archive | help
I'm trying to get -current to install on a Sun Blade 150.
It boots fine, but the installation fails as soon as it tries to
newfs the filesystems, with the following messages during the
timeouts:
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ad0: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=192
ata2: reiniting channel .. status=0x7f error=0x7f
ata2: reset tp1 mask=03 ostat0=58 ostat1=50r=0x7f
ad0: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ad0: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ad0: stat=0x50 err=0x01 lsb=0x00 msb=0x00
acd0: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata2: reset tp2 mask=03 stat0=50 stat1=10 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata2: resetting done ..
ata3: spurious interrupt - status=0x7f error=0x7f
acd0: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata3: spurious interrupt - status=0x7f error=0x7f
ad0: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata3: spurious interrupt - status=0x7f error=0x7f
ad0: setting PIO4 on AcerLabs Aladdin chip
ata3: spurious interrupt - status=0x7f error=0x7f
ad0: setting UDMA66 on AcerLabs Aladdin chip
ata3: spurious interrupt - status=0x7f error=0x7f
acd0: setting PIO4 on AcerLabs Aladdin chip
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ad0: setting UDMA66 on AcerLabs Aladdin chip
ata3: spurious interrupt - status=0x7f error=0x7f
acd0: setting PIO4 on AcerLabs Aladdin chip
ata2: device config done ..
ad0: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=192
ata2: reiniting channel ..
ata2: reset tp1 mask=03 ostat0=d0 ostat1=d0
ad0: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ad0: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ad0: stat=0x50 err=0x01 lsb=0x00 msb=0x00
acd0: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata2: reset tp2 mask=03 stat0=50 stat1=10 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata2: resetting done ..
ata3: spurious interrupt - status=0x7f error=0x7f
acd0: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata3: spurious interrupt - status=0x7f error=0x7f
ad0: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata3: spurious interrupt - status=0x7f error=0x7f
ad0: setting PIO4 on AcerLabs Aladdin chip
ata3: spurious interrupt - status=0x7f error=0x7f
ad0: setting UDMA66 on AcerLabs Aladdin chip
ata3: spurious interrupt - status=0x7f error=0x7f
acd0: setting PIO4 on AcerLabs Aladdin chip
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ad0: setting UDMA66 on AcerLabs Aladdin chip
ata3: spurious interrupt - status=0x7f error=0x7f
acd0: setting PIO4 on AcerLabs Aladdin chip
ata2: device config done ..
ata2: reiniting channel ..
ata2: reset tp1 mask=03 ostat0=d0 ostat1=d0
ad0: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ad0: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ad0: stat=0x50 err=0x01 lsb=0x00 msb=0x00
acd0: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata2: reset tp2 mask=03 stat0=50 stat1=10 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata2: resetting done ..
ata3: spurious interrupt - status=0x7f error=0x7f
acd0: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata3: spurious interrupt - status=0x7f error=0x7f
ad0: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata3: spurious interrupt - status=0x7f error=0x7f
ad0: setting PIO4 on AcerLabs Aladdin chip
ata3: spurious interrupt - status=0x7f error=0x7f
ad0: setting UDMA66 on AcerLabs Aladdin chip
ata3: spurious interrupt - status=0x7f error=0x7f
acd0: setting PIO4 on AcerLabs Aladdin chip
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ad0: setting UDMA66 on AcerLabs Aladdin chip
ata3: spurious interrupt - status=0x7f error=0x7f
acd0: setting PIO4 on AcerLabs Aladdin chip
ata2: device config done ..
ad0: FAILURE - WRITE_DMA timed out
ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=1
ata2: reiniting channel ..
ata2: reset tp1 mask=03 ostat0=d0 ostat1=d0
[...]
Then (unsurprisingly):
Unable to make new root filesystem on /dev/ad0a!
Command returned status 36
I get this either with a kernel from April 8th (snapshot CD from
ftp.freebsd.org), or with a kernel compiled from yesterday's sources.
Full dmesg (boot -v) follows.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-20040512-CURRENT #0: Thu May 13 15:41:18 CEST 2004
root@prunelle.enst.fr:/usr/src/sys/sparc64/compile/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08ce000.
Preloaded mfs_root "/boot/mfsroot" at 0xc08ce1a0.
Timecounter "tick" frequency 650000000 Hz quality 0
real memory = 536870912 (512 MB)
avail memory = 506101760 (482 MB)
machine: SUNW,Sun-Blade-100
cpu0: Sun Microsystems UltraSparc-IIe Processor (650.00 MHz CPU)
mask=0x33 maxtl=5 maxwin=7
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
openfirm: <OpenFirmware control device>
mem: <memory & I/O>
nexus0: <OpenFirmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre (US-IIe) compatible, impl 0, version 0, ign 0x7c0, bus A
initalizing intr_countp
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff
pci0: <OFW PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 1, range 32, base f0000000, size 24, enabled
map[14]: type 1, range 32, base f1000000, size 23, enabled
found-> vendor=0x108e, dev=0x1100, revid=0x01
bus=0, slot=12, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0x52 (2460 ns), mingnt=0x0a (2500 ns), maxlat=0x19 (6250 ns)
found-> vendor=0x10b9, dev=0x1533, revid=0x00
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base 00400000, size 17, enabled
found-> vendor=0x108e, dev=0x1101, revid=0x01
bus=0, slot=12, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0002, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0x52 (2460 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns)
map[10]: type 1, range 32, base 00420000, size 11, enabled
map[14]: type 1, range 32, base 00422000, size 11, enabled
found-> vendor=0x108e, dev=0x1102, revid=0x01
bus=0, slot=12, func=2
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0002, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0x52 (2460 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns)
map[10]: type 1, range 32, base 02000000, size 15, memory disabled
found-> vendor=0x108e, dev=0x1103, revid=0x01
bus=0, slot=12, func=3
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0x52 (2460 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns)
found-> vendor=0x10b9, dev=0x7101, revid=0x00
bus=0, slot=3, func=0
class=00-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00000900, size 8, port disabled
map[14]: type 1, range 32, base 00424000, size 12, memory disabled
found-> vendor=0x10b9, dev=0x5451, revid=0x01
bus=0, slot=8, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x10 (480 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00000a00, size 3, port disabled
map[14]: type 4, range 32, base 00000a18, size 2, enabled
map[18]: type 4, range 32, base 00000a10, size 3, enabled
map[1c]: type 4, range 32, base 00000a08, size 2, enabled
map[20]: type 4, range 32, base 00000a20, size 4, enabled
found-> vendor=0x10b9, dev=0x5229, revid=0xc3
bus=0, slot=13, func=0
class=01-01-ff, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x10 (480 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0xb152, revid=0x00
bus=0, slot=5, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 07000000, size 24, memory disabled
map[14]: type 4, range 32, base 00000b00, size 8, port disabled
map[18]: type 1, range 32, base 00426000, size 12, enabled
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=0, slot=19, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0080, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
ebus0: <PCI-EBus3 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 12.0 on pci0
ebus0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xf0000000
ebus0: Reserved 0x800000 bytes for rid 0x14 type 3 at 0xf1000000
ebus0: <idprom>: incomplete
ebus0: <flashprom> addr 0-0xfffff (no driver attached)
eeprom0: <EBus EEPROM/clock> addr 0x100000000-0x100001fff on ebus0
eeprom0: model mk48t59
eeprom0: registered as a time-of-day clock (resolution 1000000us)
eeprom0: hostid 832d3ac1
eeprom0: current time: 1.000000002
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
gem0: <Sun ERI 10/100 Ethernet Adaptor> mem 0x400000-0x41ffff at device 12.1 on pci0
gem0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0x400000
miibus0: <MII bus> on gem0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x0010dd, model 0x0002, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gem0: 2kB RX FIFO, 2kB TX FIFO
gem0: bpf attached
gem0: Ethernet address: 00:03:ba:2d:3a:c1
gem0: [GIANT-LOCKED]
fwohci0: vendor=108e, dev=1102
fwohci0: <1394 Open Host Controller Interface> mem 0x422000-0x4227ff,0x420000-0x4207ff at device 12.2 on pci0
fwohci0: latency timer 82 -> 82.
fwohci0: cache size 16 -> 16.
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0x420000
fwohci0: Could not allocate irq
device_probe_and_attach: fwohci0 attach returned 6
pci0: <serial bus, USB> at device 12.3 (no driver attached)
pci0: <old, non-VGA display device> at device 3.0 (no driver attached)
pci0: <multimedia, audio> at device 8.0 (no driver attached)
atapci0: <AcerLabs Aladdin UDMA66 controller> port 0xa20-0xa2f,0xa08-0xa0b,0xa10-0xa17,0xa18-0xa1b,0xa00-0xa07 at device 13.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xa20
atapci0: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xa00
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xa18
ata2: reset tp1 mask=03 ostat0=50 ostat1=50
ata2-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata2-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2-slave: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata2: reset tp2 mask=03 stat0=50 stat1=10 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata2: at 0xa00 on atapci0
ata2: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xa10
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xa08
ata3: reset tp1 mask=00 ostat0=ff ostat1=ff
ata3: at 0xa10 on atapci0
ata3: [MPSAFE]
pcib1: <OFW PCI-PCI bridge> at device 5.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x1000-0xfff
pcib1: memory decode 0x3000000-0x6ffffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <OFW PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base 04000000, size 25, memory disabled
pcib1: device (null) requested decoded memory range 0x4000000-0x5ffffff
map[14]: type 1, range 32, base 03000000, size 17, enabled
pcib1: device (null) requested decoded memory range 0x3000000-0x301ffff
map[18]: type 3, range 32, base 06000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0x6000000-0x6ffffff
found-> vendor=0x3d3d, dev=0x07a2, revid=0x01
bus=1, slot=0, func=0
class=03-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 1 supports D0 D3 current D0
pci1: <display> at device 0.0 (no driver attached)
pci0: <display, VGA> at device 19.0 (no driver attached)
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
isa_probe_children: probing PnP devices
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xc04ca360
ata3: spurious interrupt - status=0xff error=0xff
ata2-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
GEOM: Configure md0c, start 0 length 4128768 end 4128767
ata3: spurious interrupt - status=0xff error=0xff
ata2-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata3: spurious interrupt - status=0xff error=0xff
ata2-master: setting PIO4 on AcerLabs Aladdin chip
ata3: spurious interrupt - status=0xff error=0xff
ata2-master: setting UDMA66 on AcerLabs Aladdin chip
ata3: spurious interrupt - status=0xff error=0xff
ata2-slave: setting PIO4 on AcerLabs Aladdin chip
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ad0: <WDC WD400BB-22DEA0/05.03E05> ATA-5 disk at ata2-master
ad0: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
GEOM: new disk ad0
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
GEOM: Configure ad0a, start 0 length 269475840 end 269475839
GEOM: Configure ad0b, start 269475840 length 1046568960 end 1316044799
GEOM: Configure ad0c, start 0 length 40016117760 end 40016117759
GEOM: Configure ad0d, start 1316044800 length 1075814400 end 2391859199
GEOM: Configure ad0e, start 2391859200 length 538951680 end 2930810879
GEOM: Configure ad0f, start 2930810880 length 37085306880 end 40016117759
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
acd0: <LITEON DVD-ROM LTD163/G3HA> DVDR drive at ata2 as slave
acd0: read 3437KB/s (8250KB/s) write 172KB/s, 512KB buffer, PIO4
acd0: Reads: CDDA stream
acd0: Writes: CDR, CDRW, DVDR, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
GEOM: Configure acd0a, start 0 length 239861760 end 239861759
GEOM: Configure acd0f, start 239861760 length 655360 end 240517119
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
GEOM: Configure acd0t01a, start 0 length 239861760 end 239861759
GEOM: Configure acd0t01f, start 239861760 length 655360 end 240517119
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0x7f error=0xff
ata3: spurious interrupt - status=0xff error=0xff
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
ata3: spurious interrupt - status=0x7f error=0x7f
Mounting root from ufs:/dev/md0
Invalid time in real time clock.
Check and reset the date immediately!
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /stand/sysinstall
/stand/sysinstall running as init on serial console
--
Pierre Beyssac pb@enst.fr
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040513170411.GA76991>