Date: Thu, 28 Jul 2005 23:55:58 +0200 From: Bekir Alpaydin <bekir@bekir.nl> To: freebsd-mobile@freebsd.org Subject: Re: Re: (No Subject) Message-ID: <cd24a9e8.2324ca76.81b8100@imap01.bwc.eu.blackberry.com>
next in thread | raw e-mail | index | archive | help
Hello I'm using the acer ferrari 3000 with includes a broadcom wireless NIC. I've followed the instructions on http://lists.freebsd.org/pipermail/freebsd-questions/2004- August/056835.html . I'm using Freebsd 5.4 with all the ports updated woth CURRENT and all the sources installed. I'm using the bcmwl5.SYS and bcmwl5.inf windows drivers for NDIS. the INF file is a unicode file, I've convert this to ASII file. When I am at the following step: Finally you need to build the if_ndis module. This requires that you have got the drivers for your NIC availeable. # cd /sys/modules/if_ndis << this give no errors # ndiscvt -i bcmwl5.inf -s bcmwl5.sys \ -o ndis_driver_data.h << this give no errors [long output snipped] # make <<This gives an error: /usr/src/sys/modules/if_ndis/../../dev/if_ndis/if_ndis.c:49 3: error: `drv_data' undeclared (first use in this function) *** Error code 1 Stop in /usr/src/sys/modules/if_ndis. I got the error above when I want to try to make. I've googled hours and hours for a week, but I got the error. output of pciconf -lvv command, Here it is: ************************************ ************************************ ************************************ agp0@pci0:0:0: class=0x060000 card=0x72051106 chip=0x32051106 rev=0x00 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'KM400 CPU to PCI Bridge' class = bridge subclass = HOST-PCI pcib1@pci0:1:0: class=0x060400 card=0x00000080 chip=0xb1681106 rev=0x00 hdr=0x01 vendor = 'VIA Technologies Inc' device = 'ProSavageDDR P4X333 CPU to AGP 2.0/3.0 Bridge' class = bridge subclass = PCI-PCI cbb0@pci0:7:0: class=0x060700 card=0x003e1025 chip=0xac50104c rev=0x02 hdr=0x02 vendor = 'Texas Instruments (TI)' device = 'PCI1410 PC card cardBus Controller' class = bridge subclass = PCI-CardBus fwohci0@pci0:8:0: class=0x0c0010 card=0x003e1025 chip=0x8026104c rev=0x00 hdr=0x00 vendor = 'Texas Instruments (TI)' device = 'TSB43AB21 1394a-2000 OHCI PHY/link-layer Controller' class = serial bus subclass = FireWire none0@pci0:9:0: class=0x028000 card=0x1220185f chip=0x432014e4 rev=0x03 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM4306 802.11b/g Wireless LAN Controller' class = network uhci0@pci0:16:0: class=0x0c0300 card=0x003e1025 chip=0x30381106 rev=0x80 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)' class = serial bus subclass = USB uhci1@pci0:16:1: class=0x0c0300 card=0x003e1025 chip=0x30381106 rev=0x80 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)' class = serial bus subclass = USB uhci2@pci0:16:2: class=0x0c0300 card=0x003e1025 chip=0x30381106 rev=0x80 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)' class = serial bus subclass = USB none1@pci0:16:3: class=0x0c0320 card=0x003e1025 chip=0x31041106 rev=0x82 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT6202 USB 2.0 Enhanced Host Controller' class = serial bus subclass = USB isab0@pci0:17:0: class=0x060100 card=0x003e1025 chip=0x31771106 rev=0x00 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT8235 PCI to ISA Bridge' class = bridge subclass = PCI-ISA atapci0@pci0:17:1: class=0x01018a card=0x003e1025 chip=0x05711106 rev=0x06 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82xxxx EIDE Controller (All VIA Chipsets)' class = mass storage subclass = ATA pcm0@pci0:17:5: class=0x040100 card=0x003e1025 chip=0x30591106 rev=0x50 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT8233/33A/8235/8237 AC97 Enhanced Audio Controller' class = multimedia subclass = audio none2@pci0:17:6: class=0x078000 card=0x003e1025 chip=0x30681106 rev=0x80 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT82C686/686A/686B AC97 Modem controller' class = simple comms vr0@pci0:18:0: class=0x020000 card=0x003e1025 chip=0x30651106 rev=0x74 hdr=0x00 vendor = 'VIA Technologies Inc' device = 'VT6102 Rhine II PCI Fast Ethernet Controller' class = network subclass = ethernet none3@pci1:0:0: class=0x030000 card=0x003e1025 chip=0x5c611002 rev=0x01 hdr=0x00 vendor = 'ATI Technologies Inc.' device = '??? Mobility Radeon 9200' class = display subclass = VGA Could you help me please? Greets, Bekir Marcin Jessa wrote .. > On Tue, 26 Jul 2005 13:17:02 +0000 GMT > "Bekir Alpaydin" <bekir@bekir.nl> wrote: > > > Hello Dear, > > > > I want to install my wifi card of my acer ferrari 3000 with freebsd 5.4 > . Everything is working great. Only the wifi card. > What wlan nic is that? > # pciconf -lvv > > > I've followed the instructions from ndis, but I got an error 'stop in > /usr/src/sys/modules/if_ndis' when installing. > That doesn't say anything. Where did it stop? What did you exactly do? > > > Could you help me please? > > You need to send more info first. ----------------------------- Send with my BlackBerry wireless Handheld
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?cd24a9e8.2324ca76.81b8100>