Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 23 Aug 2010 18:49:22 -0700
From:      Matt <sendtomatt@gmail.com>
To:        freebsd-acpi@freebsd.org, freebsd-current@freebsd.org
Subject:   Sleep/Lenovo SL410
Message-ID:  <4C732522.1010400@gmail.com>

next in thread | raw e-mail | index | archive | help
  Hope double post is ok, have issue with -CURRENT and ACPI.
Kernel is ~week old cvsup -CURRENT amd64, issue has occurred with all 
versions of freebsd amd64 tried, however.

Upon entering S3 sleep (or S4), the laptop emits 3 loud beeps and the 
sleep indicator begins flashing faster than normal. Older -CURRENT 
kernels also result in spinning fans at this point, which no longer occurs.

Device will remain in this state indefinitely.
Device must be powered off using the ten second rule.
Occurs with custom kernel as well as GENERIC.

Last entry is /var/log/messages is:
Aug 23 17:59:09 ono-sendai acpi: suspend at 20100823 17:59:09

Please note atrtc0 error in dmesg?
Can provide KERNCONF or other files as needed.

Thank you all! I have been using various *bsd since I was 15 (~decade), 
can't tell you how grateful I am for your work, I hope to be able to 
help more soon!

ACPI dump:
http://pastebin.com/buQktjnq

Dmesg:
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
     The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #2: Sun Aug 15 23:33:22 PDT 2010
     root@ono-sendai.local:/usr/obj/usr/src/sys/ONOSENDAI amd64
CPU: Intel(R) Core(TM)2 Duo CPU     T6570  @ 2.10GHz (2094.80-MHz 
K8-class CPU)
   Origin = "GenuineIntel"  Id = 0x1067a  Family = 6  Model = 17  
Stepping = 10
   
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   
Features2=0x408e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
   AMD Features=0x20100800<SYSCALL,NX,LM>
   AMD Features2=0x1<LAHF>
   TSC: P-state invariant
real memory  = 4294967296 (4096 MB)
avail memory = 3927597056 (3745 MB)
Event timer "LAPIC" frequency 0 Hz quality 500
ACPI APIC Table: <LENOVO TP-6J >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TP-6J> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
hpet0: [FILTER]
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 
0xf2400000-0xf27fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 131068k stolen memory
drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
vgapci1: <VGA-compatible display> mem 0xf2100000-0xf21fffff at device 
2.1 on pci0
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 16 at 
device 26.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 21 at 
device 26.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 19 at 
device 26.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 
0xf2a04800-0xf2a04bff irq 19 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
hdac0: <Intel 82801I High Definition Audio Controller> mem 
0xf2a00000-0xf2a03fff irq 22 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pci2: <base peripheral> at device 0.0 (no driver attached)
pci2: <base peripheral, SD host controller> at device 0.2 (no driver 
attached)
pci2: <base peripheral> at device 0.3 (no driver attached)
pci2: <base peripheral> at device 0.4 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib4
iwn0: <Intel(R) PRO/Wireless 1000> mem 0xf2200000-0xf2201fff irq 19 at 
device 0.0 on pci5
iwn0: MIMO 1T2R, BGS, address xx:xx:xx:xx:xx:xx
iwn0: [ITHREAD]
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 
24Mbps 36Mbps 48Mbps 54Mbps
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci6: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci8: <ACPI PCI bus> on pcib6
re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 
0x3000-0x30ff mem 0xf2004000-0xf2004fff,0xf2000000-0xf2003fff irq 17 at 
device 0.0 on pci8
re0: Using 1 MSI messages
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
re0: Ethernet address: xx:xx:xx:xx:xx:xx
re0: [FILTER]
uhci3: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 23 at 
device 29.0 on pci0
uhci3: [ITHREAD]
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 19 at 
device 29.1 on pci0
uhci4: [ITHREAD]
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 18 at 
device 29.2 on pci0
uhci5: [ITHREAD]
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 
0xf2a04c00-0xf2a04fff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci9: <ACPI PCI bus> on pcib7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel AHCI controller> port 
0x1818-0x181f,0x180c-0x180f,0x1810-0x1817,0x1808-0x180b,0x18e0-0x18ff 
mem 0xf2a04000-0xf2a047ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM not supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 4> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 5> on atapci0
ata5: [ITHREAD]
ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x1c00-0x1c1f irq 
19 at device 31.3 on pci0
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: [FILTER]
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
attimer0: [FILTER]
Event timer "i8254" frequency 1193182 Hz quality 100
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Synaptics Touchpad, device ID 0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
orm0: <ISA Option ROMs> at iomem 0xe0000-0xe1fff,0xe2000-0xe37ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Starting kernel event timers: LAPIC @ 1000Hz, HPET @ 127Hz
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ad4: 476940MB <FUJITSU MJA2500BH G2 0084001C> at ata2-master UDMA100 
SATA 3Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
GEOM: ad4: partition 1 does not start on a track boundary.
GEOM: ad4: partition 1 does not end on a track boundary.
acd0: DVDR <MATSHITADVD-RAM UJ880A/SB35> at ata3-master UDMA33 SATA 1.5Gb/s
hdac0: HDA Codec #0: Realtek ALC269
hdac0: HDA Codec #3: Intel G45 HDMI
pcm0: <HDA Realtek ALC269 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Intel G45 HDMI PCM #0 HDMI> at cad 3 nid 1 on hdac0
SMP: AP CPU #1 Launched!
GEOM_JOURNAL: Journal 4173665370: ad4s2e contains journal.
GEOM_JOURNAL: Journal 2133010362: ad4s2f contains journal.
GEOM_JOURNAL: Journal 2133010362: ad4s2g contains data.
GEOM_JOURNAL: Journal 4173665370: ad4s3a contains data.
GEOM_JOURNAL: Journal ad4s2g consistent.
GEOM_JOURNAL: Journal ad4s3a consistent.
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ad4s3a.journal
WARNING: / was not properly dismounted
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe0:ata3:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata3:0:0:0): CAM status: SCSI Status Error
(probe0:ata3:0:0:0): SCSI status: Check Condition
(probe0:ata3:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present 
- tray closed)
cd0 at ata3 bus 0 scbus1 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ880A SB35> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present 
- tray closed
vboxdrv: fAsync=0 offMin=0x2d4 offMax=0x1179
vboxnet0: Ethernet address: xx:xx:xx:xx:xx:xx
drm0: [ITHREAD]
wlan0: Ethernet address: xx:xx:xx:xx:xx:xx

Sysctl hw.acpi:
hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: NONE
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 0
hw.acpi.disable_on_reboot: 0
hw.acpi.handle_reboot: 0
hw.acpi.reset_video: 0
hw.acpi.cpu.cx_lowest: C1
hw.acpi.acline: 0
hw.acpi.battery.life: 55
hw.acpi.battery.time: 87
hw.acpi.battery.state: 1
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.user_override: 0
hw.acpi.thermal.tz0.temperature: 40.0C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.passive_cooling: 1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 95.0C
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 105.0C
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.thermal.tz0._TC1: 2
hw.acpi.thermal.tz0._TC2: 3
hw.acpi.thermal.tz0._TSP: 100






Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4C732522.1010400>