Date: Wed, 17 Feb 1999 09:34:16 -0600 From: "Tom Browder" <tom2@fwb.asi.srs.com> To: "AIC7XXX Mail List" <aic7xxx@FreeBSD.ORG> Subject: Fw: Mulltiple SCSI Host Adaptors Message-ID: <01be5a8a$fa40f3e0$cb01000a@tomtom2.asi-fwb.com>
next in thread | raw e-mail | index | archive | help
I sent the following message to axp-list@redhat.com but got no takers. Perhaps some others here can take a crack. Thanks. Tom Browder -----Original Message----- From: Tom Browder <tom2@fwb.asi.srs.com> To: AXP LIST <axp-list@redhat.com> Date: Tuesday, February 16, 1999 7:57 AM Subject: Mulltiple SCSI Host Adaptors >In order to try to solve my SCSI problems, I have obtained an old Adaptec 1542 to >add to my system. I will use it for my external, narrow-SCSI tape device and reserve the >Adaptec 2940UW for the internal W and UW hard drives. > >I now understand the kernel will have to be recompiled so the Adaptec 2940UW will be >recognized as the first host, otherwise all my setup stuff referring to /dev/sda2 as the >boot partition, etc., will not work. I also need a DMA channel, port address, and IRQ for >the 1542. > >Question: How can I find the proper port address and DMA to assign to the 1542? > >I'm assuming I'll be able to use the proc file system to find unused IRQ's. Are there >any "gotchas" with that and MILO? > >Any other suggestions from old hands with multiple SCSI hosts will be appreciated. > >Thanks. > >Tom Browder > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01be5a8a$fa40f3e0$cb01000a>