From owner-freebsd-questions Thu Feb 6 11:52:16 1997 Return-Path: Received: (from root@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id LAA00323 for questions-outgoing; Thu, 6 Feb 1997 11:52:16 -0800 (PST) Received: from gdi.uoregon.edu (gdi.uoregon.edu [128.223.170.30]) by freefall.freebsd.org (8.8.5/8.8.5) with ESMTP id LAA00317 for ; Thu, 6 Feb 1997 11:52:14 -0800 (PST) Received: from localhost (dwhite@localhost) by gdi.uoregon.edu (8.8.4/8.6.12) with SMTP id LAA01572; Thu, 6 Feb 1997 11:52:11 -0800 (PST) Date: Thu, 6 Feb 1997 11:52:11 -0800 (PST) From: Doug White X-Sender: dwhite@localhost Reply-To: Doug White To: "Kevin T. Likes" cc: freebsd-questions@freebsd.org Subject: Re: NEC 282 ATAPI cd-rom problem In-Reply-To: <97Feb6.135425est.53786@mailgate.isd.state.in.us> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk On Thu, 6 Feb 1997, Kevin T. Likes wrote: > I'm running 2.1.5-RELEASE on a pentium 133 with a PCI and an ISA > bus, and an IDE contoller. I also have what is identified on bootup > as an ATAPI device NEC CDROM:282. > > I rebuilt the kernel with the following options: > > options ATAPI #Enable ATAPI support for IDE bus > device wcd0 #IDE CD-ROM > > Running nm on the kernel shows a number of what appear to be functions > to access wcd0, but when I try to mount I get the following error: > > bash# mount /dev/wcd0c /mnt > /dev/wcd0c on /mnt: Device not configured > > dmesg shows the system doesn't seem to be even scanning for the device > at all. What steps am I missing? If the wdc probe doesn't find it during startup, then it won't be configured. Try moving it to the slave position on the primary IDE controller. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major