Date: Mon, 21 Feb 2005 19:12:33 +0100 From: Juergen Dankoweit <Juergen.Dankoweit@T-Online.de> To: freebsd-stable@freebsd.org Subject: Re: Several problems with 5.3 STABLE Message-ID: <1109009553.1237.38.camel@primergy470.juergendankoweit.net> In-Reply-To: <1108851747.2998.16.camel@primergy470.juergendankoweit.net> References: <1108851747.2998.16.camel@primergy470.juergendankoweit.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello to mailing list, all problems are solved. Good bye Am Samstag, den 19.02.2005, 23:22 +0100 schrieb Juergen Dankoweit: > Hello and good evening. >=20 > Today I made an update of my FreeBSD-System with cvs as discribed in th= e > manual. > After this procedure I made some ugly experiences: > (*) Using my compact-flash-reader (Siemens-Fujtsu) shows strange > results: >=20 > # mount -t msdos /dev/da14s1 /dist > Result: > =3D=3D=3D=3D=3D=3D=3D > Feb 19 22:56:01 primergy470 kernel: umass0: Get Max Lun not supported > (STALLED) > Feb 19 22:56:01 primergy470 kernel: da14 at umass-sim0 bus 0 target 0 > lun 0 > Feb 19 22:56:01 primergy470 kernel: da14: < > Removable Direct Access > SCSI-2 device=20 > Feb 19 22:56:01 primergy470 kernel: da14: 1.000MB/s transfers > Feb 19 22:56:01 primergy470 kernel: da14: 122MB (250369 512 byte > sectors: 64H 32S/T 122C) >=20 > # umount /dist > Result: > =3D=3D=3D=3D=3D=3D=3D > Feb 19 22:57:55 primergy470 kernel: umass0: BBB reset failed, TIMEOUT > Feb 19 22:57:55 primergy470 kernel: umass0: BBB bulk-in clear stall > failed, STALLED > Feb 19 22:57:55 primergy470 kernel: umass0: BBB bulk-out clear stall > failed, STALLED > This was shown in /var/log/messages about twenty times > (*) Connecting my DigiKam (Canon Powershot G2) and identifying it is no > problem: it is shown as ugen0-device. > But when gphoto2 is started (gphoto2 --auto-detect -P) the system hangs > and after two minutes it reboots. > (*) X.ORG 6.8.1 needs about 20% of CPU-capacity, with only one(!!!!) > open Gnome-Terminal. Before system update it was only 5% (under FreeBSD > 4.10 it needs 1%, it is a P2-266MHz notebook!!!!) > (*) mplayer core dumps with signal 11 > (*) opening windows on Gnome-Desktop is very slow and needs about 10 > seconds. >=20 > Here is the output from uname -a > FreeBSD primergy470.juergendankoweit.net 5.3-STABLE FreeBSD 5.3-STABLE > #1: Sat Feb 19 18:19:23 CET 2005 > juergen@primergy470.juergendankoweit.net:/usr/obj/usr/src/sys/PRIMERGY4= 70 i386 > It is a dual processor machine with 2 x 450MHz P3 and 2GB RAM. >=20 > What is wrong with the new update? Is it better to change to FBSD 4.11? >=20 > Many thanks for your advice. >=20 > Best regards >=20 > J=C3=BCrgen >=20 > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.or= g"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1109009553.1237.38.camel>