Date: Fri, 16 Apr 1999 00:58:02 -0700 From: John-Mark Gurney <gurney_j@efn.org> To: freebsd-scsi@freebsd.org, "Justin T. Gibbs" <gibbs@narnia.plutotech.com> Subject: adv panics on boot with chinon cd-rom Message-ID: <19990416005802.03297@hydrogen.nike.efn.org>
next in thread | raw e-mail | index | archive | help
--d6Gm4EdcadzBjdND
Content-Type: text/plain; charset=us-ascii
well, I reciently reorganized my scsi devices as I got to new ultra
drives... so I had to move devices around... previously the buslogic
pci driver wouldn't have any problems with the chinon cd-rom drives,
but the advansys pci drive doesn't handle them too well...
attached are the output from a 3.1-19990408-STABLE kernel (built w/
CAMDEBUG) with the chinon cd-rom drives on ids 3 & 4... also attached
is the output from a working boot on 3.0-RELEASE w/o the chinon drives
attached...
on the -stable kernel the adv drive actually ends up panicing and
rebooting without attaching any devices...
on a side note, does anyone know what the upper limit for tags are on
the MICROP 4421-07 drives are? this drive likes to go out to lunch
if you hit it to hard... yes, I do know about the patch that allows
you to set the tags, but I'm pretty sure it's not compatible with 3.0-R,
and until I get the cdrom drives up, I'm not going to be upgrading..
--
John-Mark Gurney Voice: +1 541 684 8449
Cu Networking P.O. Box 5693, 97405
"The soul contains in itself the event that shall presently befall it.
The event is only the actualizing of its thought." -- Ralph Waldo Emerson
--d6Gm4EdcadzBjdND
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="31s.output"
BIOS basemem: 640K, extmem: 80896K (from 0xe801 call)
BIOS extmem (65472K) != RTC extmem (80896K)
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-19990408-STABLE #0: Mon Apr 12 05:18:45 GMT 1999
jmg@hydrogen.fircrest.net:/usr/src/sys/compile/hydrogen
Calibrating clock(s) ... TSC clock: 225011611 Hz, i8254 clock: 1193244 Hz
Press a key on the console to abort clock calibration
Calibrating clock(s) ... TSC clock: 225013100 Hz, i8254 clock: 1193252 Hz
Calibrating clock(s) ... TSC clock: 225011516 Hz, i8254 clock: 1193243 Hz
Calibrating clock(s) ... TSC clock: 225013076 Hz, i8254 clock: 1193251 Hz
Timecounter "i8254" frequency 1193244 Hz
CPU: AMD-K6tm w/ multimedia extensions (225.01-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x562 Stepping=2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
Data TLB: 128 entries, 2-way associative
Instruction TLB: 64 entries, 1-way associative
L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
Write Allocate Enable Limit: 80M bytes
Write Allocate 15-16M bytes: Enable
Hardware Write Allocate Control: Disable
real memory = 83886080 (81920K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x002f1000 - 0x04ffbfff, 80785408 bytes (19723 pages)
avail memory = 78270464 (76436K bytes)
Found BIOS32 Service Directory header at 0xf00faaa0
Entry = 0xfaf50 (0xf00faf50) Rev = 0 Len = 1
PCI BIOS entry at 0xaf80
DMI header at 0xf00f5a50
Version 2.0
Table at 0xf1000, 29 entries, 661 bytes
Other BIOS signatures found:
ACPI: 00000000
$PnP: 000fbb50
Preloaded elf kernel "kernel.31s.debug" at 0xf02e0000.
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=15951106)
Probing for devices on PCI bus 0:
found-> vendor=0x1106, dev=0x1595, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
chip0: <VIA 82C595 (Apollo VP2) system controller> rev 0x03 on pci0.0.0
found-> vendor=0x1106, dev=0x0586, revid=0x27
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
chip1: <VIA 82C586 PCI-ISA bridge> rev 0x27 on pci0.7.0
found-> vendor=0x104b, dev=0x1040, revid=0x00
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[0]: type 4, range 32, base 00006200, size 2
bt0: <Buslogic Multi-Master SCSI Host Adapter> rev 0x00 int a irq 10 on pci0.8.0
bt0: BT-946C FW Rev. 4.28D Narrow SCSI Host Adapter, SCSI ID 7, 100 CCBs
bt0: Using Strict Round Robin Mailbox Mode
found-> vendor=0x1011, dev=0x0014, revid=0x11
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[0]: type 4, range 32, base 00006300, size 7
map[1]: type 1, range 32, base e0000000, size 7
de0: <Digital 21041 Ethernet> rev 0x11 int a irq 11 on pci0.9.0
de0: 21041 [10Mb/s] pass 1.1
de0: address 00:80:19:35:21:93
bpf: de0 attached
found-> vendor=0x10cd, dev=0x1300, revid=0x02
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=12
map[0]: type 4, range 32, base 00006400, size 6
adv0: <AdvanSys ASC3150 Ultra SCSI controller> rev 0x02 int a irq 12 on pci0.10.0
adv0: AdvanSys Ultra SCSI Host Adapter, SCSI ID 7, queue depth 240
Initializing PnP override table
Probing for PnP devices:
Trying Read_Port at 203
CSN 1 Vendor ID: CSC4237 [0x3742630e] Serial 0xffffffff Comp ID: @@@0000 [0x00000000]
Called nullpnp_probe with tag 0x00000001, type 0x3742630e
port 0x0534 0x0388 0x0220 0x0000 irq 5:0 drq 1:3 en 1
port 0x0534 0x0388 0x0220 0x0000 irq 5:0 drq 1:3 en 1
mss_attach <CS4237>1 at 0x530 irq 5 dma 1:3 flags 0x13
pcm1 (CS423x/Yamaha/AD1816 <CS4237> sn 0xffffffff) at 0x530-0x537 irq 5 drq 1 flags 0x13 on isa
Probing for devices on the ISA bus:
sc0 on isa
sc0: fb0 kbd0
sc0: MDA/Hercules <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
kbd0: atkbd0, generic (3), config:0x10000, flags:0x3f0000
sio0: irq maps: 0x801 0x811 0x801 0x801
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A, console
sio1: irq maps: 0x801 0x809 0x801 0x801
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
dgb0: PC/Xe 64/8K (windowed)
dgb0 at 0x320-0x323 maddr 0xd0000 msize 8192 on isa
dgb0: 2 ports
mss_probe: no address supplied, try default 0x530
device at 0x530 already attached as unit 1
sb_probe: no address supplied, try defaults (0x220,0x240)
device at 0x220 already attached as unit 1
pcm0 not found
wdc0 not found at 0x1f0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
ppc: parallel port found at 0x3bc
ppc0: EPP SPP
ppc0 at 0x3bc irq 7 on isa
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
vga0 at 0x3b0-0x3bb maddr 0xb0000 msize 32768 on isa
fb0: vga0, mda, type:MDA (1), flags:0x70000
fb0: port:0x3b0-0x3bb, crtc:0x3b4, mem:0xb0000 0x8000
fb0: init mode:7, bios mode:7, current mode:7
fb0: window:0xf00b0000 size:32k gran:32k, buf:0x0 size:0k
npx0 on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 148411991 bytes/sec
bzero() bandwidth = 142227279 bytes/sec
apm0 on isa
apm: found APM BIOS version 1.2
imasks: bio c0080040, tty c00708ba, net c00708ba
de0: enabling 10baseT port
BIOS Geometries:
0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
0 accounted for
Device configuration finished.
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, logging disabled
bpf: tun0 attached
bpf: tun1 attached
bpf: sl0 attached
bpf: sl1 attached
bpf: ppp0 attached
bpf: ppp1 attached
new masks: bio c0080040, tty c00708ba, net c00708ba
bpf: lo0 attached
Waiting 2 seconds for SCSI devices to settle
bt0: Using Strict Round Robin Mailbox Mode
bt: ccb 0xf4825380 - error 4 occured. btstat = 11, sdstat = 0
bt: ccb 0xf4825200 - error 4 occured. btstat = 11, sdstat = 0
bt: ccb 0xf4825340 - error 4 occured. btstat = 0, sdstat = 2
bt: ccb 0xf4825340 - error 4 occured. btstat = 0, sdstat = 2
bt: ccb 0xf4825300 - error 4 occured. btstat = 0, sdstat = 2
bt: ccb 0xf48252c0 - error 4 occured. btstat = 0, sdstat = 2
bt: ccb 0xf4825280 - error 4 occured. btstat = 0, sdstat = 2
(probe5:bt0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe5:bt0:0:5:0): ILLEGAL REQUEST asc:24,0
(probe5:bt0:0:5:0): Invalid field in CDB
(probbt: ccb 0xf4825240 - error 4 occured. btstat = 0, sdstat = 2
bt: ccb 0xf4825280 - error 4 occured. btstat = 0, sdstat = 2
e3:bt0:0:3:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe3:bt0:0:3:0): ILLEGAL REQUEST asc:24,0
(probe3:bt0:0:3:0): Invalid field in CDB
(probe2:bt0:0:2:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe2:bt0:0:2:0): ILLEGAL REQUEST asc:24,0
(probe2:bt0:0:2:0): Invalid field in CDB
(probe4:bt0:0:4:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe4:bt0:0:4:0): ILLEGAL REQUEST asc:24,0
(probe4:bt0:0:4:0): Invalid field in CDB sks:c8,1
(probe13:adv0:0:6:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe13:adv0:0:6:0): ILLEGAL REQUEST asc:24,0
(probe13:adv0:0:6:0): Invalid field in CDB sks:cf,2
(probe10:adv0:0:3:0): Timed out
(probe10:adv0:0:3:0): Attempting abort
(probe10:adv0:0:3:0): Timed out
(probe10:adv0:0:3:0): Resetting bus
adv0: No longer in timeout
panic: adv0: Unhandled Host status error 44
syncing disks... done
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot <--
Rebooting...
--d6Gm4EdcadzBjdND
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="30r.output"
BIOS basemem: 640K, extmem: 80896K (from 0xe801 call)
BIOS extmem (65472K) != RTC extmem (80896K)
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-RELEASE #2: Thu Apr 8 23:57:30 PDT 1999
root@:/usr/src/sys/compile/hydrogen
Calibrating clock(s) ... TSC clock: 225011182 Hz, i8254 clock: 1193242 Hz
Press a key on the console to abort clock calibration
Calibrating clock(s) ... TSC clock: 225009405 Hz, i8254 clock: 1193232 Hz
Timecounter "i8254" frequency 1193242 Hz cost 3267 ns
CPU: AMD-K6tm w/ multimedia extensions (225.01-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x562 Stepping=2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
Data TLB: 128 entries, 2-way associative
Instruction TLB: 64 entries, 1-way associative
L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
real memory = 83886080 (81920K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x002b1000 - 0x04ffbfff, 81047552 bytes (19787 pages)
avail memory = 78536704 (76696K bytes)
Found BIOS32 Service Directory header at 0xf00faaa0
Entry = 0xfaf50 (0xf00faf50) Rev = 0 Len = 1
PCI BIOS entry at 0xaf80
DMI header at 0xf00f5a50
Version 2.0
Table at 0xf1000, 29 entries, 661 bytes
Other BIOS signatures found:
ACPI: 00000000
$PnP: 000fbb50
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=15951106)
Probing for devices on PCI bus 0:
found-> vendor=0x1106, dev=0x1595, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
chip0: <VIA 82C595 (Apollo VP2) system controller> rev 0x03 on pci0.0.0
found-> vendor=0x1106, dev=0x0586, revid=0x27
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
chip1: <VIA 82C586 PCI-ISA bridge> rev 0x27 on pci0.7.0
found-> vendor=0x104b, dev=0x1040, revid=0x00
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[0]: type 4, range 32, base 00006200, size 2
bt0: <Buslogic Multimaster SCSI host adapter> rev 0x00 int a irq 10 on pci0.8.0
bt0: BT-946C FW Rev. 4.28D Narrow SCSI Host Adapter, SCSI ID 7, 100 CCBs
bt0: Using Strict Round Robin Mailbox Mode
found-> vendor=0x1011, dev=0x0014, revid=0x11
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[0]: type 4, range 32, base 00006300, size 7
map[1]: type 1, range 32, base e0000000, size 7
de0: <Digital 21041 Ethernet> rev 0x11 int a irq 11 on pci0.9.0
de0: 21041 [10Mb/s] pass 1.1
de0: address 00:80:19:35:21:93
bpf: de0 attached
found-> vendor=0x10cd, dev=0x1300, revid=0x02
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=12
map[0]: type 4, range 32, base 00006400, size 6
adv0: <AdvanSys ASC3150 Ultra SCSI controller> rev 0x02 int a irq 12 on pci0.10.0
adv0: AdvanSys Ultra SCSI Host Adapter, SCSI ID 7, queue depth 240
Initializing PnP override table
Probing for PnP devices:
Trying Read_Port at 203
CSN 1 Vendor ID: CSC4237 [0x3742630e] Serial 0xffffffff Comp ID: @@@0000 [0x00000000]
Called nullpnp_probe with tag 0x00000001, type 0x3742630e
port 0x0534 0x0388 0x0220 0x0000 irq 5:0 drq 1:3 en 1
port 0x0534 0x0388 0x0220 0x0000 irq 5:0 drq 1:3 en 1
mss_attach <CS4237>1 at 0x530 irq 5 dma 1:3 flags 0x13
pcm1 (CS423x/Yamaha <CS4237> sn 0xffffffff) at 0x530-0x537 irq 5 drq 1 flags 0x13 on isa
Probing for devices on the ISA bus:
video: RTC equip. code:0x3f, DCC code:0x00
video: CRTC:0x3b4, video option:0x00, rows:80, cols:1, font height:0
video: param table EGA/VGA:0, CGA/MDA:0
video: rows_offset:1
video#0: adapter type:MDA (1), flags:0x0, CRTC:0x3b4
video#0: init mode:7, bios mode:7, current mode:7
video#0: window:0xf00b0000 size:32k gran:32k, buf:0xf0000000 size:0k
video#0: mode:7, flags:0x0 T 80x25, font:8x14, win:0xb0000
sc0: the current keyboard controller command byte 0047
kbdio: DIAGNOSE status:0055
kbdio: TEST_KBD_PORT status:0000
kbdio: RESET_KBD return code:00fe
kbdio: RESET_KBD return code:00fe
kbdio: RESET_KBD return code:00fe
kbdio: DIAGNOSE status:0055
kbdio: TEST_KBD_PORT status:0000
sc0: failed to reset the keyboard.
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: MDA/Hercules <16 virtual consoles, flags=0x0>
sio0: irq maps: 0x801 0x811 0x801 0x801
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A, console
sio1: irq maps: 0x801 0x809 0x801 0x801
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
dgb0: PC/Xe 64/8K (windowed)
dgb0 at 0x320-0x323 maddr 0xd0000 msize 8192 on isa
dgb0: 2 ports
mss_probe: no address supplied, try default 0x530
device at 0x530 already attached as unit 1
sb_probe: no address supplied, try defaults (0x220,0x240)
device at 0x220 already attached as unit 1
pcm0 not found
wdc0 not found at 0x1f0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
ppc: parallel port found at 0x3bc
ppc0: EPP SPP
ppc0 at 0x3bc irq 7 on isa
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
npx0 on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 124766063 bytes/sec
bzero() bandwidth = 138869601 bytes/sec
apm0 on isa
apm: found APM BIOS version 1.2
imasks: bio c0080040, tty c00708ba, net c00708ba
de0: enabling 10baseT port
BIOS Geometries:
0:03fe7f20 0..1022=1023 cylinders, 0..127=128 heads, 1..32=32 sectors
1:03d27f20 0..978=979 cylinders, 0..127=128 heads, 1..32=32 sectors
2:03d27f20 0..978=979 cylinders, 0..127=128 heads, 1..32=32 sectors
3:03df3f20 0..991=992 cylinders, 0..63=64 heads, 1..32=32 sectors
0 accounted for
Device configuration finished.
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, logging disabled
bpf: tun0 attached
bpf: tun1 attached
bpf: sl0 attached
bpf: sl1 attached
bpf: ppp0 attached
bpf: ppp1 attached
new masks: bio c0080040, tty c00708ba, net c00708ba
bpf: lo0 attached
Waiting 2 seconds for SCSI devices to settle
bt0: Using Strict Round Robin Mailbox Mode
(probe3:bt0:0:3:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe3:bt0:0:3:0): ILLEGAL REQUEST asc:24,0
(probe3:bt0:0:3:0): Invalid field in CDB
(probe2:bt0:0:2:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe2:bt0:0:2:0): ILLEGAL REQUEST asc:24,0
(probe2:bt0:0:2:0): Invalid field in CDB
(probe5:bt0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe5:bt0:0:5:0): ILLEGAL REQUEST asc:24,0
(probe5:bt0:0:5:0): Invalid field in CDB
(probe4:bt0:0:4:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe4:bt0:0:4:0): ILLEGAL REQUEST asc:24,0
(probe4:bt0:0:4:0): Invalid field in CDB sks:c8,1
pass0 at bt0 bus 0 target 1 lun 0
pass0: <MICROP 4421-07 0329SJ 0329> Fixed Direct Access SCSI2 device
pass0: Serial Number 6054782534
pass0: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled
pass1 at bt0 bus 0 target 2 lun 0
pass1: <FUJITSU M2654S-512 010O> Fixed Direct Access SCSI1 device
pass1: 10.0MB/s transfers (10.0MHz, offset 15)
pass2 at bt0 bus 0 target 3 lun 0
pass2: <FUJITSU M2654S-512 010O> Fixed Direct Access SCSI1 device
pass2: 10.0MB/s transfers (10.0MHz, offset 15)
pass3 at bt0 bus 0 target 4 lun 0
pass3: <IMPRIMIS 94601-15 4614> Fixed Direct Access SCSI1 device
pass3: 4.32MB/s transfers (4.32MHz, offset 15)
pass4 at bt0 bus 0 target 5 lun 0
pass4: <PLEXTOR CD-ROM DM-XX28 3.08> Removable CD-ROM SCSI2 device
pass4: 3.300MB/s transfers
pass5 at adv0 bus 0 target 0 lun 0
pass5: <SAMSUNG WN32162U 0100> Fixed Direct Access SCSI2 device
pass5: Serial Number
pass5: 20.0MB/s transfers (20.0MHz, offset 15)
pass6 at adv0 bus 0 target 1 lun 0
pass6: <MICROP 4743 S150> Fixed Direct Access SCSI2 device
pass6: Serial Number U8008JK
pass6: 20.0MB/s transfers (20.0MHz, offset 15)
pass7 at adv0 bus 0 target 2 lun 0
pass7: <MICROP 4743 S150> Fixed Direct Access SCSI2 device
pass7: Serial Number U8004BH
pass7: 20.0MB/s transfers (20.0MHz, offset 15)
da2 at adv0 bus 0 target 0 lun 0
da2: <SAMSUNG WN32162U 0100> Fixed Direct Access SCSI2 device
da2: Serial Number
da2: 20.0MB/s transfers (20.0MHz, offset 15)
da2: 2068MB (4236661 512 byte sectors: 255H 63S/T 263C)
da1 at adv0 bus 0 target 1 lun 0
da1: <MICROP 4743 S150> Fixed Direct Access SCSI2 device
da1: Serial Number U8008JK
da1: 20.0MB/s transfers (20.0MHz, offset 15)
da1: 4100MB (8398600 512 byte sectors: 255H 63S/T 522C)
da4 at adv0 bus 0 target 2 lun 0
da4: <MICROP 4743 S150> Fixed Direct Access SCSI2 device
da4: Serial Number U8004BH
da4: 20.0MB/s transfers (20.0MHz, offset 15)
da4: 4100MB (8398600 512 byte sectors: 255H 63S/T 522C)
da3 at bt0 bus 0 target 2 lun 0
da3: <FUJITSU M2654S-512 010O> Fixed Direct Access SCSI1 device
da3: 10.0MB/s transfers (10.0MHz, offset 15)
da3: 1959MB (4014054 512 byte sectors: 128H 32S/T 979C)
da0 at bt0 bus 0 target 1 lun 0
da0: <MICROP 4421-07 0329SJ 0329> Fixed Direct Access SCSI2 device
da0: Serial Number 6054782534
da0: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled
da0: 2047MB (4193360 512 byte sectors: 128H 32S/T 1023C)
cd0 at bt0 bus 0 target 5 lun 0
cd0: <PLEXTOR CD-ROM DM-XX28 3.08> Removable CD-ROM SCSI2 device
cd0: 3.300MB/s transfers
cd0: cd present [275057 x 2048 byte records]
da5 at bt0 bus 0 target 4 lun 0
da5: <IMPRIMIS 94601-15 4614> Fixed Direct Access SCSI1 device
da5: 4.32MB/s transfers (4.32MHz, offset 15)
da5: 992MB (2031705 512 byte sectors: 64H 32S/T 992C)
da6 at bt0 bus 0 target 3 lun 0
da6: <FUJITSU M2654S-512 010O> Fixed Direct Access SCSI1 device
da6: 10.0MB/s transfers (10.0MHz, offset 15)
da6: 1959MB (4014054 512 byte sectors: 128H 32S/T 979C)
Considering FFS root f/s.
changing root device to da0s1a
--d6Gm4EdcadzBjdND--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990416005802.03297>