Date: Wed, 17 Sep 1997 10:21:26 +0200 From: =?iso-8859-1?Q?Patrik_=C5str=F6m?= <patrik.astrom@tv3.se> To: "'Jonathan Fosburgh'" <jef53313@Bayou.UH.EDU> Cc: "'freebsd-questions@freebsd.org'" <freebsd-questions@freebsd.org> Subject: RE: EtherExress 16 card. Message-ID: <44F52736D0CBD011BA6200805FA6FE1313F01C@STK_FILE>
next in thread | raw e-mail | index | archive | help
If the card have both TP and BNC then the problem might be the "link" option in 'ifconfig', or you might need to configure the card for the port you are using with the setup software for the card When the OS boots it will display what port on the network interface it will be using. Hope this will help.. Patrik Astrom, TV3 Stockholm > -----Original Message----- > From: Jonathan Fosburgh [SMTP:jef53313@Bayou.UH.EDU] > Sent: den 17 september 1997 09:18 > To: freebsd-questions@FreeBSD.ORG > Subject: EtherExress 16 card. > > I know from looking back through the archive that there has been a lot > of > past discussion of this card, but none of it seems to answer my > problem. > I recently installed FreeBSD on a 486DX-2 66. When the machine is > booting > the card seems to be registering the network ... the top light on the > back > of the card is on ands the bottom light flashes. When the boot cycle > probes it, it finds the card alright, correct port (300) memory > address > (d000) and irq (10). It does this with both the ie0 and ie1 drivers > when > I have them at those settings. However, after the card is probed, the > bottom light ceases to flash and the network is always unreachable. > Does > anyone have any idea what might be causing this? > > Jonathan Fosburgh, wotan@scientist.com , University of Houston > Geophysics > ********************************************************************** > ********* > We shall not cease from exploration, > And the end of our exploring shall be to arrive > Where we started from, and know the place for the first > time. > --T.S. Eliot, The Four Quartets > ********************************************************************** > *********
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44F52736D0CBD011BA6200805FA6FE1313F01C>