Date: Thu, 24 Jan 2002 20:49:13 -0600 (CST) From: Chris Dillon <cdillon@wolves.k12.mo.us> To: SXren Schmidt <sos@freebsd.dk> Cc: <stable@FreeBSD.ORG> Subject: Re: ATA driver feature request Message-ID: <Pine.BSF.4.32.0201242034260.84621-100000@mail.wolves.k12.mo.us> In-Reply-To: <200201241954.g0OJsTq94418@freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 24 Jan 2002, SXren Schmidt wrote: > > However, the warning message would be slightly reworded like "non-ATA66 > > compliant cable or second device" > > Good point, I'll get something done about this... Just as a note, it doesn't have to just be the cable or the second device, it can be either one or both or maybe the controller too. :-) I don't remember, but I might actually be using an 80-wire cable here on my box at work (as if it would matter with only an ATA33 controller): atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0 ad0: 19541MB <Maxtor 52049U4> [39703/16/63] at ata0-master UDMA33 ata0-slave: DMA limited to UDMA33, non-ATA66 compliant cable ad1: 6149MB <Maxtor 90650U2> [12495/16/63] at ata0-slave UDMA33 acd0: CDROM <ATAPI CDROM> at ata1-master using PIO4 afd0: 96MB <IOMEGA ZIP 100 ATAPI> [32/64/96] at ata1-slave using PIO0 ata0-master is actually the device that is capable of ATA66 (actually ATA100 I think). I think ata0-slave is only capable of ATA33, but I could be wrong. My system at home with an ATA100-capable drive on a PIIX4 controller doesn't mention anything about a non-compliant cable (though it really is an 80-wire cable, maybe that's why), but it is also the only thing on the bus (I use SCSI for everything else): atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0 ad0: 39083MB <Maxtor 5T040H4> [79408/16/63] at ata0-master UDMA33 -- Chris Dillon - cdillon@wolves.k12.mo.us - cdillon@inter-linc.net FreeBSD: The fastest and most stable server OS on the planet - Available for IA32 (Intel x86) and Alpha architectures - IA64, PowerPC, UltraSPARC, and ARM architectures under development - http://www.freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.32.0201242034260.84621-100000>