Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 26 Sep 2023 08:41:30 -0400
From:      mike tancsa <mike@sentex.net>
To:        Kurt Jaeger <pi@freebsd.org>
Cc:        FreeBSD-STABLE Mailing List <freebsd-stable@freebsd.org>
Subject:   Re: ifconfig -v ix0 output delay
Message-ID:  <14cd1c6b-0020-4116-a3de-0b7399810bee@sentex.net>
In-Reply-To: <20230926072840.GA81481@home.opsec.eu>
References:  <dcf71d1b-7bae-4db7-bd97-9ecb7f4d8a64@sentex.net> <20230926072840.GA81481@home.opsec.eu>

next in thread | previous in thread | raw e-mail | index | archive | help
On 9/26/2023 3:28 AM, Kurt Jaeger wrote:
> Hi!
>
>>         A small annoyance, but I was wondering why "ifconfig -v ix0" seems to take
>> a "long time" compared to other 10G nics.   e.g.
> [...]
>
> Which version of the ix driver did you load ? The base one or
> the one from the ports, net/intel-ix-kmod ? I'm not sure
> freebsd@intel.com is reading this list, so maybe pointing
> them to the issue via some PR would be useful.

This is just the base driver, built in ix with copper PHY

  pciconf -lvcb ix0
ix0@pci0:1:0:0: class=0x020000 rev=0x01 hdr=0x00 vendor=0x8086 
device=0x1528 subvendor=0x15d9 subdevice=0x1528
     vendor     = 'Intel Corporation'
     device     = 'Ethernet Controller 10-Gigabit X540-AT2'
     class      = network
     subclass   = ethernet
     bar   [10] = type Prefetchable Memory, range 64, base 0xc7c00000, 
size 2097152, enabled
     bar   [18] = type I/O Port, range 32, base 0x6020, size 32, enabled
     bar   [20] = type Prefetchable Memory, range 64, base 0xc7e04000, 
size 16384, enabled
     cap 01[40] = powerspec 3  supports D0 D3  current D0
     cap 05[50] = MSI supports 1 message, 64 bit, vector masks
     cap 11[70] = MSI-X supports 64 messages, enabled
                  Table in map 0x20[0x0], PBA in map 0x20[0x2000]
     cap 10[a0] = PCI-Express 2 endpoint max data 256(512) FLR NS
                  max read 512
                  link x8(x8) speed 5.0(5.0) ASPM disabled(L0s/L1)
     ecap 0001[100] = AER 2 0 fatal 0 non-fatal 1 corrected
     ecap 000e[150] = ARI 1
     ecap 0010[160] = SR-IOV 1 IOV disabled, Memory Space disabled, ARI 
disabled
                      0 VFs configured out of 64 supported
                      First VF RID Offset 0x0180, VF RID Stride 0x0002
                      VF Device ID 0x1515
                      Page Sizes: 4096 (enabled), 8192, 65536, 262144, 
1048576, 4194304
     ecap 000d[1d0] = ACS 1 Source Validation unavailable, Translation 
Blocking unavailable
                      P2P Req Redirect unavailable, P2P Cmpl Redirect 
unavailable
                      P2P Upstream Forwarding unavailable, P2P Egress 
Control unavailable
                      P2P Direct Translated unavailable, Enhanced 
Capability unavailable






Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?14cd1c6b-0020-4116-a3de-0b7399810bee>