Date: Mon, 15 Oct 2001 23:40:55 -0700 From: Marcel Moolenaar <marcel@xcllnt.net> To: ia64@FreeBSD.org Subject: Dual-Itanium Lion boots ok. Message-ID: <20011015234055.A1617@dhcp01.pn.xcllnt.net>
next in thread | raw e-mail | index | archive | help
Log follows (long): FYI, \begin{verbatim} PAL Proc at 0xe00000007ff48010 SAL Proc at 0xe00000007febac40, GP at 0xe00000007ff26390 Platform clock frequency 133349000 Hz Processor ratio 12/2, Bus ratio 1/1, ITC ratio 12/2 ptc.e base=0x0, count1=1, count2=1, stride1=0x0, stride2=0x0 ACPI debug layer 0x0 debug level 0x0 Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #35: Sun Oct 14 19:29:27 PDT 2001 marcel@vaio.foo.xcllnt.net:/usr/src/sys/ia64/compile/ITANIUM CPU: Itanium (800.09-Mhz) Origin = "GenuineIntel" Model = 0 Revision = 6 Features = 0x0 real memory = 4288634880 (4188120K bytes) Physical memory chunk(s): 0x0000c000 - 0x0006ffff, 409600 bytes (50 pages) 0x00100000 - 0x004fffff, 4194304 bytes (512 pages) 0x00bc6000 - 0x7fce1fff, 2131869696 bytes (260238 pages) 0x7fe94000 - 0x7fe95fff, 8192 bytes (1 pages) 0x7ff7c000 - 0x7ff7ffff, 16384 bytes (2 pages) 0x100000000 - 0x17fd87fff, 2144894976 bytes (261828 pages) 0x17fef4000 - 0x17ff03fff, 65536 bytes (8 pages) avail memory = 4127711232 (4030968K bytes) Preloaded elf kernel "/kernel" at 0xe000000000bc4000. null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Table 'FACP' at 0xe00000007fe9c700 Table 'APIC' at 0xe00000007fe9c838 Local SAPIC entry ProcessorId=0x0, Id=0x0, Eid=0x0 Local SAPIC entry ProcessorId=0x201, Id=0x0, Eid=0x0 Local SAPIC entry ProcessorId=0xaa02, Id=0x0, Eid=0x0 Local SAPIC entry ProcessorId=0xaa03, Id=0x0, Eid=0x0 Local SAPIC entry ProcessorId=0xaa04, Id=0x0, Eid=0x0 Local SAPIC entry ProcessorId=0xaa05, Id=0x0, Eid=0x0 Local SAPIC entry ProcessorId=0xaa06, Id=0x0, Eid=0x0 Local SAPIC entry ProcessorId=0xaa07, Id=0x0, Eid=0x0 I/O SAPIC entry Id=0x4, Vector=0x0, Address=0xfec00000 Interrupt source override entry Bus=0, Source=9, Irq=0x9 Platform interrupt entry Polarity=3, TriggerMode=1, Id=0x0, Eid=0x0, Vector=0x2, Irq=61 Platform interrupt entry Polarity=3, TriggerMode=3, Id=0x0, Eid=0x0, Vector=0x1e, Irq=60 acpi0: <INTEL SR460AC> on motherboard acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI" frequency 3579545 Hz unknown: I/O range not supported acpi_timer0: <24-bit timer at 3.579545MHz> port 0xc08-0xc0b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_cpu2: <CPU> on acpi0 acpi_cpu3: <CPU> on acpi0 acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x7600, revid=0x01 bus=0, slot=3, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 map[20]: type 4, range 32, base 00001000, size 4, enabled found-> vendor=0x8086, dev=0x7601, revid=0x01 bus=0, slot=3, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 map[20]: type 4, range 32, base 00006f80, size 5, enabled acpi_pcib0: matched entry for 0.3.INTD (source ) acpi_pcib0: device is hardwired to IRQ 50 found-> vendor=0x8086, dev=0x7602, revid=0x01 bus=0, slot=3, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=d, irq=50 map[20]: type 4, range 32, base 0000c000, size 4, port disabled found-> vendor=0x8086, dev=0x7603, revid=0x01 bus=0, slot=3, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 intpin=b, irq=255 found-> vendor=0x8086, dev=0x123d, revid=0x01 bus=0, slot=4, func=0 class=08-00-20, hdrtype=0x00, mfdev=0 map[10]: type 1, range 32, base f3fe0000, size 12, enabled map[14]: type 4, range 32, base 00006f00, size 6, enabled map[18]: type 1, range 32, base f3fa0000, size 17, enabled acpi_pcib0: matched entry for 0.5.INTA (source ) acpi_pcib0: device is hardwired to IRQ 51 found-> vendor=0x8086, dev=0x1229, revid=0x09 bus=0, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=51 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base f8000000, size 26, enabled map[14]: type 4, range 32, base 00006800, size 8, enabled map[18]: type 1, range 32, base f3ff0000, size 14, enabled acpi_pcib0: matched entry for 0.6.INTA (source ) acpi_pcib0: device is hardwired to IRQ 49 found-> vendor=0x1002, dev=0x524b, revid=0x00 bus=0, slot=6, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=49 powerspec 1 supports D0 D1 D3 current D0 found-> vendor=0x8086, dev=0x84e0, revid=0x02 bus=0, slot=16, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 pci0: <PCI bus> on acpi_pcib0 isab0: <PCI-ISA bridge> at device 3.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Generic PCI ATA controller> port 0x1000-0x100f at device 3.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1000 ata0: mask=03 ostat0=50 ostat2=01 ata0-master: ATAPI probe 14 eb ata0-slave: ATAPI probe ff ff ata0: mask=03 stat0=00 stat1=01 ata0-slave: ATA probe 04 ff ata0: devices=04 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1008 ata1: mask=03 ostat0=50 ostat2=01 ata1-master: ATAPI probe 14 eb ata1-slave: ATAPI probe 14 eb ata1: mask=03 stat0=00 stat1=01 ata1: devices=0c ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, USB> at device 3.2 (no driver attached) pci0: <serial bus, SMBus> at device 3.3 (no driver attached) pci0: <base peripheral, interrupt controller> at device 4.0 (no driver attached) fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x6f00-0x6f3f mem 0xf3fa0000-0xf3fbffff,0xf3fe0000-0xf3fe0fff irq 51 at device 5.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:d0:b7:00:df:8e fxp0: PCI IDs: 8086 1229 8086 3001 0009 fxp0: Chip Type: 0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp0 attached pci0: <display, VGA> at device 6.0 (no driver attached) pci0: <bridge, HOST-PCI> at device 16.0 (no driver attached) acpi_pcib1: <Host-PCI bridge> on acpi0 pci1: physical bus=1 map[10]: type 4, range 32, base 00008800, size 8, enabled map[14]: type 1, range 32, base ebff0000, size 12, enabled acpi_pcib1: matched entry for 1.2.INTA (source ) acpi_pcib1: device is hardwired to IRQ 48 found-> vendor=0x1077, dev=0x1216, revid=0x05 bus=1, slot=2, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=48 powerspec 1 supports D0 D3 current D0 map[10]: type 1, range 32, base ebfe0000, size 8, enabled acpi_pcib1: matched entry for 1.15.INTA (source ) acpi_pcib1: device is hardwired to IRQ 55 found-> vendor=0x8086, dev=0x123f, revid=0x01 bus=1, slot=15, func=0 class=08-04-00, hdrtype=0x00, mfdev=0 intpin=a, irq=55 pci1: <PCI bus> on acpi_pcib1 Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.4 isp0: <Qlogic ISP 12160 PCI SCSI Adapter> port 0x8800-0x88ff mem 0xebff0000-0xebff0fff irq 48 at device 2.0 on pci1 isp0: using I/O space register mapping isp0: bus 0 is in LVD Mode isp0: bus 1 is in LVD Mode isp0: Board Type 12160, Chip Revision 0x5, resident F/W Revision 10.4.28 isp0: Last F/W revision was 10.4.28 isp0: 568 max I/O commands supported isp0: Initiator ID is 7 on Channel 0 isp0: Initiator ID is 7 on Channel 1 isp0: Enabled FW features (0x3) pci1: <base peripheral> at device 15.0 (no driver attached) acpi_pcib2: <Host-PCI bridge> on acpi0 pci4: physical bus=4 map[10]: type 1, range 32, base e1ff0000, size 8, enabled acpi_pcib2: matched entry for 4.15.INTA (source ) acpi_pcib2: device is hardwired to IRQ 55 found-> vendor=0x8086, dev=0x123f, revid=0x01 bus=4, slot=15, func=0 class=08-04-00, hdrtype=0x00, mfdev=0 intpin=a, irq=55 pci4: <PCI bus> on acpi_pcib2 pci4: <base peripheral> at device 15.0 (no driver attached) acpi_pcib3: <Host-PCI bridge> on acpi0 pci8: physical bus=8 map[10]: type 1, range 32, base d7ff0000, size 8, enabled acpi_pcib3: matched entry for 8.15.INTA (source ) acpi_pcib3: device is hardwired to IRQ 57 found-> vendor=0x8086, dev=0x123f, revid=0x01 bus=8, slot=15, func=0 class=08-04-00, hdrtype=0x00, mfdev=0 intpin=a, irq=57 pci8: <PCI bus> on acpi_pcib3 pci8: <base peripheral> at device 15.0 (no driver attached) acpi_pcib4: <Host-PCI bridge> on acpi0 pci12: physical bus=12 map[10]: type 1, range 32, base cfff0000, size 8, enabled acpi_pcib4: matched entry for 12.15.INTA (source ) acpi_pcib4: device is hardwired to IRQ 57 found-> vendor=0x8086, dev=0x123f, revid=0x01 bus=12, slot=15, func=0 class=08-04-00, hdrtype=0x00, mfdev=0 intpin=a, irq=57 pci12: <PCI bus> on acpi_pcib4 pci12: <base peripheral> at device 15.0 (no driver attached) acpi_pcib5: <Host-PCI bridge> on acpi0 pci15: physical bus=15 map[10]: type 1, range 32, base c7ff0000, size 8, enabled acpi_pcib5: matched entry for 15.15.INTA (source ) acpi_pcib5: device is hardwired to IRQ 59 found-> vendor=0x8086, dev=0x123f, revid=0x01 bus=15, slot=15, func=0 class=08-04-00, hdrtype=0x00, mfdev=0 intpin=a, irq=59 pci15: <PCI bus> on acpi_pcib5 pci15: <base peripheral> at device 15.0 (no driver attached) acpi_pcib6: <Host-PCI bridge> on acpi0 pci18: physical bus=18 map[10]: type 1, range 32, base bfff0000, size 8, enabled acpi_pcib6: matched entry for 18.15.INTA (source ) acpi_pcib6: device is hardwired to IRQ 59 found-> vendor=0x8086, dev=0x123f, revid=0x01 bus=18, slot=15, func=0 class=08-04-00, hdrtype=0x00, mfdev=0 intpin=a, irq=59 pci18: <PCI bus> on acpi_pcib6 pci18: <base peripheral> at device 15.0 (no driver attached) unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 psm0: unable to allocate IRQ unknown: not probed (disabled) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: irq maps: 0 0 0 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) sio-: sio0 already exists, using sio1 instead Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcb7ff on isa0 sio1 failed to probe at port 0x3f8 flags 0x10 on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x0> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xb8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff isa_probe_children: probing PnP devices Timecounter "IA64 ITC" frequency 800089008 Hz bpf: lo0 attached acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5% ata1-slave: ata_command: timeout waiting for intr ata1-slave: ATAPI identify failed ata0-master: piomode=2 dmamode=-1 udmamode=-1 dmaflag=0 ata0-master: success setting PIO2 on generic chip Creating DISK afd0 afd0: <LS-120 S200 01 UHD Floppy/0113A012> rewriteable drive at ata0 as master afd0: 120MB (246528 sectors), 963 cyls, 8 heads, 32 S/T, 512 B/S afd0: 0KB/s, PIO2 ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: MODE_SENSE_BIG trying to write on read buffer acd0: MODE_SENSE_BIG - NO SENSE asc=0x00 ascq=0x00 error=0x04 acd0: <CD-224E/1.5A> CDROM drive at ata1 as master acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4 acd0: Reads: CD-R, CD-DA stream acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Waiting 5 seconds for SCSI devices to settle isp0: driver initiated bus reset of bus 0 isp0: driver initiated bus reset of bus 1 (probe0:isp0:0:0:0): Retrying Command (probe6:isp0:0:6:0): error 22 (probe6:isp0:0:6:0): Unretryable Error Creating DISK da0 pass0 at isp0 bus 0 target 0 lun 0 pass0: <QUANTUM ATLAS IV 9 SCA 0B0B> Fixed Direct Access SCSI-3 device pass0: Serial Number 369010030833 pass0: 160.000MB/s transfers (80.000MHz, offset 8, 16bit), Tagged Queueing Enabled pass1 at isp0 bus 0 target 6 lun 0 pass1: <ESG-SHV SCA HSBP M12 0.06> Fixed Processor SCSI-2 device pass1: 3.300MB/s transfers pass1 at isp0 bus 0 target 6 lun 0 pass1: <ESG-SHV SCA HSBP M12 0.06> Fixed Processor SCSI-2 device pass1: 3.300MB/s transfers da0 at isp0 bus 0 target 0 lun 0 da0: <QUANTUM ATLAS IV 9 SCA 0B0B> Fixed Direct Access SCSI-3 device da0: Serial Number 369010030833 da0: 160.000MB/s transfers (80.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 8761MB (17942584 512 byte sectors: 255H 63S/T 1116C) acquiring duplicate lock of same type: "zone" 1st @ ../../../vm/vm_zone.c:473 2nd @ ../../../vm/vm_zone.c:473 Sending DHCP Discover packet from interface fxp0 (00:d0:b7:00:df:8e) Received DHCP Offer packet on fxp0 from 192.168.0.1 (accepted) (no root path) Sending DHCP Request packet from interface fxp0 (00:d0:b7:00:df:8e) Received DHCP Ack packet on fxp0 from 192.168.0.1 (accepted) (got root path) fxp0 at 192.168.0.3 server 192.168.0.1 boot file /usr/ia64/netboot/kernel subnet mask 255.255.255.0 router 192.168.0.1 rootfs 192.168.0.1:/usr/ia64/root Adjusted interface fxp0 Mounting root from nfs: NFS ROOT: 192.168.0.1:/usr/ia64/root WARNING: preposterous time in file system -- CHECK AND RESET THE DATE! WARNING: preposterous time in file system -- CHECK AND RESET THE DATE! start_init: trying /sbin/init Enter full pathname of shell or RETURN for /bin/sh: # \end{verbatim} -- Marcel Moolenaar USPA: A-39004 marcel@xcllnt.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-ia64" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011015234055.A1617>