Date: Wed, 04 Sep 2002 09:50:41 +0200 From: Martin Nilsson <martin@gneto.com> To: current@FreeBSD.ORG Subject: Lots of ACPI errors when booting yesterdays CURRENT Message-ID: <3D75BB51.4020305@gneto.com>
next in thread | raw e-mail | index | archive | help
Below is a trimmed dmesg from booting yesterdays CURRENT on my=20
SuperMicro P3TDE6 machine (RCC/ServerWorks HE-SLt chipset).
I heven't found anything wrong with the OS, it is just that the boot=20
seems to be a bit on the chatty side :-)
Is this caused by a bad BIOS setting or is there something strange with=20
this board/BIOS or the acpi support in CURRENT?
I also noticed support for four acpi_cpu:s is, this as intended, the=20
board only have room for two?
/Martin
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Tue Sep 3 17:41:10 CEST 2002
root@euklides.gneto.com:/usr/obj/ext/FreeBSD/CURRENT/sys/EUKLIDES
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04c7000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04c70a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1266068553 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1266.07-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x6b1 Stepping =3D 1
=20
Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory =3D 536805376 (524224K bytes)
avail memory =3D 515674112 (503588K bytes)
Pentium Pro MTRR support enabled
Using $PIR table, 10 entries at 0xc00f52e0
ACPI-0536: *** Error: Field name [INDX] already exists in current sc=
ope
ACPI-0536: *** Error: Field name [DATA] already exists in current sc=
ope
ACPI-0536: *** Error: Field name [INDX] already exists in current sc=
ope
ACPI-0536: *** Error: Field name [DATA] already exists in current sc=
ope
ACPI-0536: *** Error: Field name [C000] already exists in current sc=
ope
ACPI-0536: *** Error: Field name [C010] already exists in current sc=
ope
ACPI-0536: *** Error: Field name [C020] already exists in current sc=
ope
ACPI-0685: *** Warning: NsLookup: INDX, type 1, checking for type 11=
ACPI-0685: *** Warning: NsLookup: DATA, type 2, checking for type 11=
ACPI-0685: *** Warning: NsLookup: INDX, type 1, checking for type 11=
ACPI-0685: *** Warning: NsLookup: DATA, type 2, checking for type 11=
ACPI-0685: *** Warning: NsLookup: C000, type 8, checking for type 13=
ACPI-0685: *** Warning: NsLookup: C010, type 8, checking for type 13=
ACPI-0685: *** Warning: NsLookup: C020, type 8, checking for type 13=
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <RCC RCCNILE > on motherboard
ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND
ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND
ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND
ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND
ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND
ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND
ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND
ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND
--- 15 identical lines removed
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
acpi_cpu3: <CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib1
pcib3: <ACPI PCI-PCI bridge> at device 0.1 on pci0
pci1: <ACPI PCI bus> on pcib3
pci1: <display, VGA> at device 0.0 (no driver attached)
nge0: <National Semiconductor Gigabit Ethernet> port 0xde00-0xdeff mem=20
0xfeadb000-0xfeadbfff irq 11 at device 1.0 on pci0
nge0: Ethernet address: 00:40:33:af:35:33
miibus0: <MII bus> on nge0
nsgphy0: <DP83861 10/100/1000 media interface> on miibus0
nsgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,=20
1000baseT-FDX, auto
pci0: <network, ethernet> at device 2.0 (no driver attached)
pcm0: <AudioPCI ES1370> port 0xdf00-0xdf3f irq 11 at device 3.0 on pci0
ahc_pci0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd000-0xd0ff mem =
0xfeadc000-0xfeadcfff irq 5 at device 5.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs
ahc_pci1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem =
0xfeadf000-0xfeadffff irq 10 at device 5.1 on pci0
aic7899: Ultra160 Wide Channel B, SCSI Id=3D7, 32/253 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem=20
0xfe900000-0xfe9fffff,0xfeadd000-0xfeaddfff irq 9 at device 6.0 on pci0
fxp0: Ethernet address 00:30:48:23:0e:af
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
pci0: <mass storage, ATA> at device 15.1 (no driver attached)
pci0: <serial bus, USB> at device 15.2 (no driver attached)
pcib4: <ACPI Host-PCI bridge> on acpi0
pcib4: duplicate bus number 0 - not probing bus
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND
--- 13 identical lines removed
fdc0: cmd 3 failed at out byte 1 of 3
ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND
--- 170 identical lines removed
fdc0: cmd 3 failed at out byte 1 of 3
ACPI-1354: *** Error: Method execution failed, AE_NOT_FOUND
--- 155 identical lines removed
pcib2: <ServerWorks host to PCI bridge> at pcibus 2 on motherboard
pci2: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> port=20
0xef80-0xef9f mem 0xfebc0000-0xfebdffff,0xfebe0000-0xfebfffff irq 11 at=20
device 2.0 on pci2
em0: Speed:1000 Mbps Duplex:Full
orm0: <Option ROMs> at iomem 0xd1800-0xd27ff,0xc0000-0xc87ff on isa0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port=20
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS10K3_36_SCA 020W> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged=20
Queueing Enabled
da0: 35074MB (71833096 512 byte sectors: 255H 63S/T 4471C)
Mounting root from ufs:/dev/da0s4a
cd0 at ahc1 bus 0 target 2 lun 0
cd0: <TEAC CD-ROM CD-532S 3.0A> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ohci0: <OHCI (generic) USB controller> mem 0xfeade000-0xfeadefff irq 10=20
at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
--=20
Martin Nilsson - Home:<martin@gneto.com> Work:<martin@svenskabutiker.se>
UNIX & Webb programmer/architect Malm=F6, Sweden
FreeBSD - The power to serve. http://www.FreeBSD.org
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3D75BB51.4020305>