From owner-freebsd-current@FreeBSD.ORG Sun Jan 18 09:40:56 2004 Return-Path: Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 623E716A4CE; Sun, 18 Jan 2004 09:40:56 -0800 (PST) Received: from arthur.nitro.dk (port324.ds1-khk.adsl.cybercity.dk [212.242.113.79]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2093D43D48; Sun, 18 Jan 2004 09:40:48 -0800 (PST) (envelope-from simon@arthur.nitro.dk) Received: by arthur.nitro.dk (Postfix, from userid 3000) id 21A991142B; Sun, 18 Jan 2004 18:40:46 +0100 (CET) Date: Sun, 18 Jan 2004 18:40:45 +0100 From: "Simon L. Nielsen" To: freebsd-current@freebsd.org Message-ID: <20040118174044.GC761@arthur.nitro.dk> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="LSp5EJdfMPwZcMS1" Content-Disposition: inline User-Agent: Mutt/1.5.5.1i cc: Soeren Schmidt Subject: Hang when probing for CDROM during boot with recent ata(4) code X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 18 Jan 2004 17:40:56 -0000 --LSp5EJdfMPwZcMS1 Content-Type: multipart/mixed; boundary="8nsIa27JVQLqB7/C" Content-Disposition: inline --8nsIa27JVQLqB7/C Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hello With the changed to the ata(4) code 2004-01-14 21:26 UTC ("Use UMA instead of plain malloc for getting ATA request storage...") the ata code hangs on my laptop when it's trying to detect my CDROM/DVD drive. If I disconnect my CDROM drive it boots fine. The laptop is an IBM Thinkpad R40 with a CDRW/DVD drive. I think I saw somebody notice the same problem with a Thinkpad T40 a few days ago. My source tree is updated today, but I have tried to use old version of 'sys/dev/ata'. I can boot with ata code from 2004-01-14 15:00 UTC, and it fails with ata code from 2004-01-14 22:00 UTC. =20 With the new code it hangs right after: ata1: reiniting channel .. ata1: reset tp1 mask=3D03 ostat0=3D00 ostat1=3D00 ata1-master: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata1-slave: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata1: reset tp2 mask=3D03 stat0=3D00 stat1=3D00 devices=3D0xc ata1: resetting done .. ata1-master: pio=3D0x0c wdma=3D0x22 udma=3D0x42 cable=3D40pin ata1-master: setting PIO4 on Intel ICH4 chip ata1-master: setting PIO4 on Intel ICH4 chip ata1: device config done .. With the working kerne I can get: [simon@zaphod:~] sudo atacontrol list ATA channel 0: Master: ad0 ATA/ATAPI rev 6 Slave: no device present ATA channel 1: Master: acd0 ATA/ATAPI rev 5 Slave: no device present =20 I have attached dmesg verbose from new code with CDROM drive removed (dmesgv-new-nocd) and with old code with the CDROM drive installed (dmesgv-old). I don't have a real dmesg from when it hangs, since the laptop has no serial port. --=20 Simon L. Nielsen FreeBSD Documentation Team --8nsIa27JVQLqB7/C Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesgv-new-nocd Content-Transfer-Encoding: quoted-printable 9 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 2 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 29 func 7 acpi0: Power Button (fixed) ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cpu0: port 0x530-0x537 on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_tz0: port 0x530-0x537 on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.0 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.1 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.2 \\_SB_.LNKH irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.3 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.0 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.0 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.1 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.2 \\_SB_.LNKH irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.3 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.0 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.1 pci0: on pcib0 pci0: physical bus=3D0 map[10]: type 3, range 32, base d0000000, size 28, enabled found-> vendor=3D0x8086, dev=3D0x3340, revid=3D0x03 bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x2090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x3341, revid=3D0x03 bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x00a0, cachelnsz=3D0 (dwords) lattimer=3D0x60 (2880 ns), mingnt=3D0x0c (3000 ns), maxlat=3D0x00 (0 ns) map[20]: type 4, range 32, base 00001800, size 5, enabled pcib0: matched entry for 0.29.INTA (source \\_SB_.LNKA) pcib0: slot 29 INTA is routed to irq 11 found-> vendor=3D0x8086, dev=3D0x24c2, revid=3D0x01 bus=3D0, slot=3D29, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.29.INTB (source \\_SB_.LNKD) pcib0: slot 29 INTB is routed to irq 11 found-> vendor=3D0x8086, dev=3D0x24c4, revid=3D0x01 bus=3D0, slot=3D29, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[20]: type 4, range 32, base 00001840, size 5, enabled pcib0: matched entry for 0.29.INTC (source \\_SB_.LNKC) pcib0: slot 29 INTC is routed to irq 11 found-> vendor=3D0x8086, dev=3D0x24c7, revid=3D0x01 bus=3D0, slot=3D29, func=3D2 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D11 map[10]: type 1, range 32, base c0000000, size 10, enabled pcib0: matched entry for 0.29.INTD (source \\_SB_.LNKH) pcib0: slot 29 INTD is routed to irq 11 found-> vendor=3D0x8086, dev=3D0x24cd, revid=3D0x01 bus=3D0, slot=3D29, func=3D7 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dd, irq=3D11 powerspec 2 supports D0 D3 current D0 found-> vendor=3D0x8086, dev=3D0x2448, revid=3D0x81 bus=3D0, slot=3D30, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x8080, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x24cc, revid=3D0x01 bus=3D0, slot=3D31, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[10]: type 4, range 32, base 00000000, size 3, enabled map[14]: type 4, range 32, base 00000000, size 2, enabled map[18]: type 4, range 32, base 00000000, size 3, enabled map[1c]: type 4, range 32, base 00000000, size 2, enabled map[20]: type 4, range 32, base 00001860, size 4, enabled found-> vendor=3D0x8086, dev=3D0x24ca, revid=3D0x01 bus=3D0, slot=3D31, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 map[20]: type 4, range 32, base 00001880, size 5, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=3D0x8086, dev=3D0x24c3, revid=3D0x01 bus=3D0, slot=3D31, func=3D3 class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0001, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[10]: type 4, range 32, base 00001c00, size 8, enabled map[14]: type 4, range 32, base 000018c0, size 6, enabled map[18]: type 1, range 32, base c0000c00, size 9, enabled map[1c]: type 1, range 32, base c0000800, size 8, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=3D0x8086, dev=3D0x24c5, revid=3D0x01 bus=3D0, slot=3D31, func=3D5 class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 4, range 32, base 00002000, size 7, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=3D0x8086, dev=3D0x24c6, revid=3D0x01 bus=3D0, slot=3D31, func=3D6 class=3D07-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 powerspec 2 supports D0 D3 current D0 agp0: mem 0xd0000000-0xdfffffff at device = 0.0 on pci0 agp0: allocating GATT for aperture of size 256M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xc0100000-0xc01fffff pcib1: prefetched decode 0xe0000000-0xe7ffffff ---- initial configuration ------------------------ \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.0 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.0 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.1 pci1: on pcib1 pci1: physical bus=3D1 map[10]: type 3, range 32, base e0000000, size 27, enabled map[14]: type 4, range 32, base 00003000, size 8, enabled map[18]: type 1, range 32, base c0100000, size 16, enabled pcib1: matched entry for 1.0.INTA (source \\_SB_.LNKA) pcib1: slot 0 INTA is routed to irq 11 found-> vendor=3D0x1002, dev=3D0x4c57, revid=3D0x00 bus=3D1, slot=3D0, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0387, statreg=3D0x02b0, cachelnsz=3D8 (dwords) lattimer=3D0x42 (1980 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 drm0: port 0x3000-0x30ff mem 0xc0100000-0x= c010ffff,0xe0000000-0xe7ffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xd0000000 256MB info: [drm] Initialized radeon 1.10.0 20020828 on minor 0 uhci0: port 0x1800-0x181f irq 1= 1 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x1820-0x183f irq 1= 1 at device 29.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x1840-0x185f irq 1= 1 at device 29.2 on pci0 usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ugen0: Actiontec Electronics product 0x0441, rev 1.10/5.46, addr 2 pci0: at device 29.7 (no driver attached) pcib2: at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 5 pcib2: I/O decode 0x4000-0x8fff pcib2: memory decode 0xc0200000-0xcfffffff pcib2: prefetched decode 0xe8000000-0xefffffff pcib2: Subtractively decoded bridge. ---- initial configuration ------------------------ \\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.0 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.0 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.2 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.3 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.7.0 \\_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.8.0 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.6.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.0 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.0 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.2 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.3 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.7.0 \\_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.8.0 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.6.0 pci2: on pcib2 pci2: physical bus=3D2 pcib2: matched entry for 2.0.INTA (source \\_SB_.LNKD) pcib2: slot 0 INTA is routed to irq 11 found-> vendor=3D0x104c, dev=3D0xac56, revid=3D0x00 bus=3D2, slot=3D0, func=3D0 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0x03 (750 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base c0204000, size 12, enabled pcib2: matched entry for 2.2.INTA (source \\_SB_.LNKC) pcib2: slot 2 INTA is routed to irq 11 found-> vendor=3D0x8086, dev=3D0x1043, revid=3D0x04 bus=3D2, slot=3D2, func=3D0 class=3D02-80-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0116, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x22 (8500 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base c0206000, size 11, enabled map[14]: type 1, range 32, base c0200000, size 14, enabled pcib2: matched entry for 2.7.INTA (source \\_SB_.LNKA) pcib2: slot 7 INTA is routed to irq 11 found-> vendor=3D0x104c, dev=3D0x8026, revid=3D0x00 bus=3D2, slot=3D7, func=3D0 class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0116, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1000 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base c0205000, size 12, enabled map[14]: type 4, range 32, base 00008000, size 6, enabled pcib2: matched entry for 2.8.INTA (source \\_SB_.LNKE) pcib2: slot 8 INTA is routed to irq 11 found-> vendor=3D0x8086, dev=3D0x103d, revid=3D0x81 bus=3D2, slot=3D8, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0117, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x42 (1980 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x38 (14000 n= s) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 cbb0: irq 11 at device 0.0 on pci2 pcib2: device cbb0 requested decoded memory range 0x88000000-0xffffffff cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac56104c 0x02100107 0x06070000 0x00024008=20 0x10: 0x88000000 0x020000a0 0xb0050302 0xfffff000=20 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc=20 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b=20 0x40: 0x05281014 0x00000001 0x00000000 0x00000000=20 0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x80: 0x0844d071 0x00000000 0x00000000 0x01d11002=20 0x90: 0x406402c0 0x00000000 0x00000000 0x00000000=20 0xa0: 0xfe120001 0x00c00000 0x00000010 0x00000007=20 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20 pci2: at device 2.0 (no driver attached) fwohci0: vendor=3D104c, dev=3D8026 fwohci0: <1394 Open Host Controller Interface> mem 0xc0200000-0xc0203fff,0x= c0206000-0xc02067ff irq 11 at device 7.0 on pci2 fwohci0: latency timer 64 -> 64. fwohci0: cache size 8 -> 8. pcib2: device fwohci0 requested decoded memory range 0xc0206000-0xc02067ff fwohci0: OHCI version 1.10 (ROM=3D0) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:06:1b:00:20:08:fc:24 fwohci0: resetting OHCI...done (loop=3D0) fwohci0: fwphy_rddata: 0x2 loop=3D0, retry=3D0 fwohci0: fwphy_rddata: 0x3 loop=3D0, retry=3D0 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: fwphy_rddata: 0x5 loop=3D0, retry=3D0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=3D0, retry=3D0 fwohci0: fwphy_rddata: 0x2 loop=3D0, retry=3D0 fwohci0: fwphy_rddata: 0x4 loop=3D0, retry=3D0 fwohci0: fwphy_rddata: 0x4 loop=3D0, retry=3D0 fwohci0: fwphy_rddata: 0x4 loop=3D0, retry=3D0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xa002 -> 0xf800a002 fwohci0: fwohci_set_intr: 1 firewire0: on fwohci0 sbp0: on firewire0 sbp_attach (cold=3D1) fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:06:1b:08:fc:24 fwe0: bpf attached fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=3D0, retry=3D0 fwohci0: fwphy_rddata: 0x1 loop=3D0, retry=3D0 fwohci0: BUS reset sbp_post_busreset fwohci0: node_id=3D0xc000ffc0, gen=3D1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) fwohci0: fw_set_bus_manager: 0->0 (loop=3D0) firewire0: bus manager 0 (me) send phy_config root_node=3D-1 gap_count=3D5 fwohci0: maxdesc: 2 fwohci0: start AT DMA status=3D0 fxp0: port 0x8000-0x803f mem 0xc= 0205000-0xc0205fff irq 11 at device 8.0 on pci2 pcib2: device fxp0 requested decoded memory range 0xc0205000-0xc0205fff fxp0: using memory space register mapping fxp0: Ethernet address 00:06:1b:d2:d5:6f fxp0: PCI IDs: 8086 103d 1014 0522 0081 fxp0: Dynamic Standby mode is disabled miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1860-0x186f,0-0x3,0-0x7,0-0= x3,0-0x7 at device 31.1 on pci0 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata0-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0-slave: stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: reset tp2 mask=3D03 stat0=3D50 stat1=3D00 devices=3D0x1 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=3D03 ostat0=3D00 ostat1=3D00 ata1-master: stat=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00 ata1-slave: stat=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00 ata1: reset tp2 mask=3D03 stat0=3D00 stat1=3D00 devices=3D0x0 ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: at device 31.3 (no driver attached) pcm0: port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xc000080= 0-0xc00008ff,0xc0000c00-0xc0000dff irq 11 at device 31.5 on pci0 pcm0: pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Ster= eo Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4 pcm0: sndbuf_setmap 301000, 4000; 0xe86ce000 -> 301000 pcm0: sndbuf_setmap 313000, 4000; 0xe86d2000 -> 313000 pci0: at device 31.6 (no driver attached) unknown: not probed (disabled) unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 unknown: not probed (disabled) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x801 0x801 0x801 0x801 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 8250 or not responding ppc0: using extended I/O port range ppc0: SPP ppc0 port 0x3bc-0x3c3 irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 unknown: not probed (disabled) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x801 0x801 0x801 0x801 sio1: probe failed test(s): 0 1 2 4 6 7 9 acpi_ec0: Changing GLK from 1 to 0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cmbat0: on acpi0 acpi_ec0: info: new max delay is 320 us acpi_cmbat1: on acpi0 acpi_acad0: on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x801 0x801 0x801 0x801 sio1: probe failed test(s): 0 1 2 4 6 7 9 mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: