Date: 30 Oct 2003 10:13:55 -0800 From: Phillip Walters <pwalters@linkline.com> To: freebsd-sparc64@freebsd.org Subject: Problem with dc interface on 5.1-CURRENT Message-ID: <1067537635.1976.53.camel@loveshack.linkline.com>
next in thread | raw e-mail | index | archive | help
Hi Everyone,
I'm currently having a problem with the dc interfaces on a Netra in
5.1-CURRENT. I'm able to bring the interfaces up and set their MAC
addresses. When I do bring them up, though, I get the following:
# ifconfig dc0 up
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
#
I don't think that's a problem all by itself, but it doesn't appear that
there's any traffic going through the interface. Trying to ping my
workstation from the Netra, and running tcpdump on the workstation shows
absolutely nothing coming from the Netra.
Anyone have advice on what I could possibly have wrong here?
# dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.1-RELEASE #0: Thu Jun 5 13:27:04 GMT 2003
root@:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0412000.
Timecounter "tick" frequency 500000000 Hz
real memory = 2120499200 (2022 MB)
avail memory = 2065719296 (1970 MB)
cpu0: Sun Microsystems UltraSparc-IIe Processor (500.00 MHz CPU)
nexus0: <OpenFirmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A
DVMA map: 0x60000000 to 0x63ffffff
pci0: <PCI bus> on pcib0
pci0: <old, non-VGA display device> at device 3.0 (no driver attached)
dc0: <Davicom DM9102A 10/100BaseTX> port 0x10100-0x101ff mem
0x2000-0x20ff irq
2 8 at device 5.0 on pci0
dc0: Ethernet address: 00:00:00:00:00:00
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, USB> at device 10.0 (no driver attached)
dc1: <Davicom DM9102A 10/100BaseTX> port 0x10000-0x100ff irq 6 at device
12.0
on pci0
dc1: Ethernet address: 00:00:00:00:00:00
miibus1: <MII bus> on dc1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <AcerLabs Aladdin UDMA66 controller> port
0x10220-0x1022f,0x10208-0x102 0b,0x10210-0x10217,0x10218-0x1021b,0x10200-0x10207 irq 12 at device 13.0 on pci0
ata2: at 0x10200 on atapci0
ata3: at 0x10210 on atapci0
Timecounters tick every 10.000 msec
Power Failure Detected: Shutting down NOW.
ad0: 38166MB <ST340016A> [77545/16/63] at ata3-master UDMA66
acd0: CDROM <CD-224E> at ata3-slave PIO4
Mounting root from ufs:/dev/ad0a
warning: no time-of-day clock registered, system time will not be set
accurately
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1067537635.1976.53.camel>