From owner-freebsd-questions Thu Dec 7 23:16:17 1995 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id XAA04679 for questions-outgoing; Thu, 7 Dec 1995 23:16:17 -0800 (PST) Received: from Gatekeeper.nbs.sk (Gatekeeper.nbs.sk [193.87.130.2]) by freefall.freebsd.org (8.7.3/8.7.3) with ESMTP id XAA04555 for ; Thu, 7 Dec 1995 23:15:28 -0800 (PST) Received: (from tis@localhost) by Gatekeeper.nbs.sk id IAA29142 (8.6.12/IDA-1.6 for ); Fri, 8 Dec 1995 08:19:20 +0100 Received: from chodovar.nbs.sk by (National Bank of Slovakia firewall gateway) via SMTP; Fri Dec 8 08:19:06 1995 Received: (from siman@localhost) by chodovar.nbs.sk (8.7.1/8.7.1) id IAA03743 for questions@freebsd.org; Fri, 8 Dec 1995 08:15:30 +0100 (MET) From: miro siman Message-Id: <199512080715.IAA03743@chodovar.nbs.sk> Subject: Problems with dump utility - again To: questions@freebsd.org Date: Fri, 8 Dec 1995 08:15:30 +0100 (MET) X-Mailer: ELM [version 2.4 PL24] Content-Type: text Sender: owner-questions@freebsd.org Precedence: bulk Hello, I've got some problems during dumping ( with /sbin/dump ) my filesystems to SCSI 8mm tape drive. Here is my HW/SW config: HW: HP Vectra N2 4/66 486 DX2 machine 32MB RAM AHA-1540CF/1542CF with BIOS v2.01 SCSI adapter 1 GB IBM DPES-31080 S31K SCSI disk EXABYTE EXB-8500SMBANXH1 0458 8mm SCSI tape drive WD SMC Ultra eth. card SW: FreeBSD 2.1.0-RELEASE When dumping filesystems to tape drive with: /sbin/dump 0ubdf 32 105000 /dev/nrst0 /dev/sd0s2g <-- /home OS hangs up with these err. messages on system console: aha0: MBO 02 and not 00 (free) sd0(aha0:0:0): timed out adapter not taking command.. frozen?! Debugger ("aha1540") called AGAIN and dump utility writing these error messages: DUMP: Date of this level 0 dump: date is here DUMP; .... DUMP: Dumping /dev/rsd0s2g (/home) to /dev/rst0 DUMP: mapping (Pass I) [regular files] DUMP: mapping (Pass II) [ directories] DUMP: estimated xxxxxxx tape blocks on 0,xx tape(s) DUMP: dumping (Pass III) [directories] DUMP: read error from /dev/rsd0s2g: Input/output error: \ [sector 36592]: count=2048 After these messages i'm forced to use HW reset to reboot system. Any suggestions would be most appreciated Thanks, miro -- Miroslav Siman National Bank of Slovakia phone: ++42-7-513-3130 Zahradnicka 153, P.O. Box 27 fax: ++42-7-526-5968 820 09 Bratislava fax box:++42-7-513-6130 Slovak Republic Internet: siman@nbs.sk