Date: Sun, 17 Nov 2019 21:34:16 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 242039] eBox 3352DX3-AP (Vortex86DX3) crashes on 12.1 release Message-ID: <bug-242039-227@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D242039 Bug ID: 242039 Summary: eBox 3352DX3-AP (Vortex86DX3) crashes on 12.1 release Product: Base System Version: 12.1-RELEASE Hardware: i386 OS: Any Status: New Severity: Affects Only Me Priority: --- Component: kern Assignee: bugs@FreeBSD.org Reporter: vezhlys@gmail.com There's a regression on my eBox 3352DX3-AP system since 12.0 release. It started to crash on boot with the following backtrace (typed manually): panic: vm_fault_hold fault on nofault entry, addr: 0 cpuid =3D 1 time =3D 1 KDB: stack backtrace: 0x103c50e at kdb_backtrace+0x4e 0xff6001 at vpanic+0x121 0xff5ed4 at panic+0x14 0x12f629e at vm_fault_hold+0x274e 0x12f3b0a at vm_fault+0x4a 0x155cfce at trap_pfault+0xbe 0x155c66c at trap+0x3ac 0xffc0316d at PTDpde+0x4175 0xfbf370 at ithread_loop+0x1c0 0xfbc8da at fork_exit+0x6a 0xffc033ca at PTDpde+0x43d2 The boot was performed using FreeBSD memstick installation image. The syste= m is based on DM&P Vortex86DX3 CPU and was successfully booting on 12.0 release. dmesg from 12.0 can be found below (in comparison, the crash seems to happen after "ohci0: <OHCI (generic) USB controller> mem 0xfebee000-0xfebeefff irq= 18 at device 10.0 on pci0" line in 12.1): ---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE r341666 GENERIC i386 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: Pentium ProUnknown (1000.02-MHz 686-class CPU) Origin=3D"Vortex86 SoC" Id=3D0x611 real memory =3D 2147483648 (2048 MB) avail memory =3D 2005929984 (1913 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <R D C APIC1706> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 1 random: entropy device external interface kbd1 at kbdmux0 [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0x15f8f40, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <R D C QA09 > on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_ec0: <Embedded Controller: GPE 0> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pcib1: [GIANT-LOCKED] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 2.0 on pci0 pcib2: [GIANT-LOCKED] isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 isab1: <PCI-ISA bridge> at device 7.1 on pci0 device_attach: isab1 attach returned 6 vte0: <RDC R6040 FastEthernet> port 0xef00-0xefff mem 0xfebefc00-0xfebefcff= irq 19 at device 8.0 on pci0 miibus0: <MII bus> on vte0 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vte0: Ethernet address: xx:xx:xx:xx:xx:xx ohci0: <OHCI (generic) USB controller> mem 0xfebee000-0xfebeefff irq 18 at device 10.0 on pci0 usbus0 on ohci0 usbus0: 12Mbps Full Speed USB v1.0 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebef800-0xfebef8ff irq 21= at device 10.1 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 atapci0: <Generic ATA controller> port 0xee80-0xee87,0xee00-0xee03,0xed80-0xed87,0xed00-0xed03,0xec80-0xec8f irq 2= 3 at device 12.0 on pci0 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 vgapci0: <VGA-compatible display> port 0xec00-0xec7f mem 0xf8000000-0xfbffffff,0xfebc0000-0xfebdffff at device 13.0 on pci0 vgapci0: Boot video device hdac0: <RDC M3010 HDA Controller> mem 0xfebe4000-0xfebe7fff irq 18 at device 14.0 on pci0 pci0: <wireless controller, iRDA> at device 15.0 (no driver attached) acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_acad0: <AC Adapter> on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0 ata1: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. ppc0: parallel port not found. Timecounters tick every 1.000 msec hdacc0: <Realtek ALC262 HDA CODEC> at cad 1 on hdac0 hdaa0: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC262 (Analog)> at nid 20 and 25 on hdaa0 pcm1: <Realtek ALC262 (Digital)> at nid 30 on hdaa0 pcm2: <Realtek ALC262 (Rear Analog Line-in)> at nid 26 on hdaa0 ugen0.1: <(0x17f3) OHCI root HUB> at usbus0 ugen1.1: <(0x17f3) EHCI root HUB> at usbus1 uhub0: <(0x17f3) OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub1: <(0x17f3) EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ada0 at ata2 bus 0 scbus0 target 0 lun 0 ada0: <SDU1 D0 RDC SD-IDE HOST CONTROLLER 01000000> ATA-6 device ada0: Serial Number 00010000000000000000 ada0: 33.300MB/s transfers (UDMA2, PIO 512bytes) ada0: 30145MB (61736960 512 byte sectors) Trying to mount root from ufs:/dev/ada0p2 [rw]... uhub0: 4 ports with 4 removable, self powered uhub1: 4 ports with 4 removable, self powered lo0: link state changed to UP ugen0.2: <CASUE CASUE USB Keyboard> at usbus0 ukbd0 on uhub0 ukbd0: <U+P Keyboard> on usbus0 kbd2 at ukbd0 uhid0 on uhub0 uhid0: <CASUE CASUE USB Keyboard, class 0/0, rev 1.10/0.01, addr 2> on usbu= s0 --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-242039-227>