Date: Tue, 13 Nov 2012 23:52:06 +0200 (EET) From: Heikki Suonsivu <hsu@bbnetworks.net> To: FreeBSD-gnats-submit@FreeBSD.org Subject: usb/173616: LG USB DVD-RW USB STALL Message-ID: <201211132152.qADLq6j9039168@lelu.suonsivu.net> Resent-Message-ID: <201211132200.qADM00Un043189@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 173616
>Category: usb
>Synopsis: LG USB DVD-RW USB STALL
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-usb
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue Nov 13 22:00:00 UTC 2012
>Closed-Date:
>Last-Modified:
>Originator: Heikki Suonsivu
>Release: FreeBSD 9.1-PRERELEASE amd64
>Organization:
bbnetworks.net
>Environment:
System: FreeBSD lelu.suonsivu.net 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #2: Sat Nov 10 03:23:41 EET 2012 root@lelu.suonsivu.net:/usr/obj/usr/src/sys/HSU9 amd64
dmesg:
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-PRERELEASE #2: Sat Nov 10 03:23:41 EET 2012
root@lelu.suonsivu.net:/usr/obj/usr/src/sys/HSU9 amd64
CPU: AMD Phenom(tm) II X4 965 Processor (3411.49-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x100f43 Family = 0x10 Model = 0x4 Stepping = 3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 3832315904 (3654 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <070512 APIC1458>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <070512 XSDT1458> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fec10000, 20 (3) failed
acpi0: reservation of fed80000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cfe00000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xd0000000-0xdfffffff,0xfe6f0000-0xfe6fffff,0xfe500000-0xfe5fffff irq 18 at device 5.0 on pci1
hdac0: <ATI (0x970f) HDA Controller> mem 0xfe6e8000-0xfe6ebfff irq 19 at device 5.1 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe7fe000-0xfe7fffff irq 17 at device 0.0 on pci2
xhci0: 32 byte context size.
usbus0 on xhci0
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <JMicron JMB361 UDMA133 controller> port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f mem 0xfe8ffc00-0xfe8ffdff irq 18 at device 0.0 on pci3
ahci0: <JMicron JMB361 AHCI SATA controller> at channel -1 on atapci0
ahci0: AHCI v1.10 with 1 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ata2: <ATA channel> at channel 0 on atapci0
ahci1: <ATI IXP700 AHCI SATA controller> port 0xa000-0xa007,0x9000-0x9003,0x8000-0x8007,0x7000-0x7003,0x6000-0x600f mem 0xfe4ffc00-0xfe4fffff irq 19 at device 17.0 on pci0
ahci1: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
ahcich1: <AHCI channel> at channel 0 on ahci1
ahcich2: <AHCI channel> at channel 1 on ahci1
ahcich3: <AHCI channel> at channel 2 on ahci1
ahcich4: <AHCI channel> at channel 3 on ahci1
ahcich5: <AHCI channel> at channel 4 on ahci1
ahcich6: <AHCI channel> at channel 5 on ahci1
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe4fe000-0xfe4fefff irq 18 at device 18.0 on pci0
usbus1 on ohci0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe4ff800-0xfe4ff8ff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe4fd000-0xfe4fdfff irq 18 at device 19.0 on pci0
usbus3 on ohci1
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe4ff400-0xfe4ff4ff irq 17 at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
hdac1: <ATI SB600 HDA Controller> mem 0xfe4f4000-0xfe4f7fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci4: <ACPI PCI bus> on pcib4
fwohci0: <VIA Fire II (VT6306)> port 0xdc00-0xdc7f mem 0xfe9fb800-0xfe9fbfff irq 22 at device 7.0 on pci4
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:1e:8c:00:00:e4:87:16
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:1e:8c:e4:87:16
fwe0: Ethernet address: 02:1e:8c:e4:87:16
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:1e:8c:00:00:e4:87:16 @ 0xfffe00000000, S400, maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xc76d0000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe4fc000-0xfe4fcfff irq 18 at device 20.5 on pci0
usbus5 on ohci2
pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 16 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: f4:6d:04:15:87:ff
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe4f3000-0xfe4f3fff irq 18 at device 22.0 on pci0
usbus6 on ohci3
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe4ff000-0xfe4ff0ff irq 17 at device 22.2 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci2
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xd3000-0xd5fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
IP Filter: v4.1.28 initialized. Default = pass all, Logging = enabled
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, rule-based forwarding enabled, default to accept, logging disabled
DUMMYNET 0 with IPv6 initialized (100409)
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
hdacc0: <ATI RS690/780 HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI RS690/780 Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI RS690/780 (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
pcm2: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1
pcm3: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1
pcm4: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <0x1033> at usbus0
uhub0: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <ATI> at usbus7
uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub5: 2 ports with 2 removable, self powered
uhub6: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
uhub0: 4 ports with 4 removable, self powered
ada0 at ahcich1 bus 0 scbus2 target 0 lun 0
ada0: <WDC WD30EZRS-00J99B0 80.00A80> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad8
ada1 at ahcich2 bus 0 scbus3 target 0 lun 0
ada1: <ST32000542AS CC34> ATA-8 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad10
ada2 at ahcich3 bus 0 scbus4 target 0 lun 0
ada2: <ST32000542AS CC34> ATA-8 SATA 2.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad12
ada3 at ahcich4 bus 0 scbus5 target 0 lun 0
ada3: <WDC WD20EARS-00MVWB0 51.0AB51> ATA-8 SATA 2.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad14
ada4 at ahcich6 bus 0 scbus7 target 0 lun 0
ada4: <WDC WD30EZRX-00MMMB0 80.00A80> ATA-8 SATA 3.x device
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada4: Previously was known as ad18
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
cd0 at ata2 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-4167B DL11> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
SMP: AP CPU #3 Launched!
cd0: Attempt to query device size failed: NOT READY, Medium not present
Timecounter "TSC-low" frequency 13326119 Hz quality 800
uhub7: 4 ports with 4 removable, self powered
GEOM_MIRROR: Device mirror/leluroot launched (1/2).
GEOM_MIRROR: Device leluroot: rebuilding provider ada1p3.
GEOM_MIRROR: Device mirror/lelu-root launched (1/1).
GEOM_MIRROR: Device mirror/lelu-u launched (2/2).
GEOM_JOURNAL: Journal 3960267491: mirror/lelu-root contains data.
GEOM_JOURNAL: Journal 3960267491: mirror/lelu-root contains journal.
GEOM_JOURNAL: Journal mirror/lelu-root clean.
GEOM_JOURNAL: Journal 769953320: mirror/lelu-u contains data.
GEOM_JOURNAL: Journal 769953320: mirror/lelu-u contains journal.
GEOM_JOURNAL: Journal mirror/lelu-u clean.
Root mount waiting for: GJOURNAL GJOURNAL usbus4 usbus2
uhub4: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
ugen2.2: <vendor 0x1a40> at usbus2
uhub8: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 2> on usbus2
uhub8: MTT enabled
Root mount waiting for: usbus2
uhub8: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2
ugen2.3: <vendor 0x2109> at usbus2
uhub9: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.00/2.95, addr 3> on usbus2
uhub9: 4 ports with 4 removable, self powered
Root mount waiting for: usbus2
ugen2.4: <vendor 0x1a40> at usbus2
uhub10: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 4> on usbus2
uhub10: MTT enabled
Root mount waiting for: usbus2
uhub10: 4 ports with 4 removable, self powered
ugen2.5: <vendor 0x050d> at usbus2
uhub11: <vendor 0x050d USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 5> on usbus2
uhub11: MTT enabled
Root mount waiting for: usbus2
uhub11: 7 ports with 7 removable, self powered
Root mount waiting for: usbus2
ugen2.6: <Logitech> at usbus2
ums0: <Logitech USB Receiver, class 0/0, rev 1.10/9.10, addr 6> on usbus2
ums0: 5 buttons and [XYZ] coordinates ID=0
Root mount waiting for: usbus2
ugen2.7: <Unicomp Inc> at usbus2
ukbd0: <Keyboard Interface> on usbus2
kbd2 at ukbd0
usbd_set_config_index: could not read device status: USB_ERR_SHORT_XFER
Root mount waiting for: usbus2
ugen2.8: <BUFFALO> at usbus2
umass0: <MSC Bulk-Only Transfer> on usbus2
umass0: 8070i (ATAPI) over Bulk-Only; quirks = 0x0100
umass0:9:0:-1: Attached to scbus9
Trying to mount root from ufs:/dev/mirror/leluroot [rw,async]...
cd1 at umass-sim0 bus 0 scbus9 target 0 lun 0
cd1: <Optiarc DVD RW AD-7560S SB01> Removable CD-ROM SCSI-0 device
cd1: 40.000MB/s transfers
cd1: cd present [278530 x 2048 byte records]
usbd_set_config_index: could not read device status: USB_ERR_SHORT_XFER
ugen2.9: <BUFFALO> at usbus2
umass1: <MSC Bulk-Only Transfer> on usbus2
umass1: 8070i (ATAPI) over Bulk-Only; quirks = 0x0100
umass1:10:1:-1: Attached to scbus10
cd2 at umass-sim1 bus 1 scbus10 target 0 lun 0
cd2: <Optiarc DVD RW AD-7590S 1.J0> Removable CD-ROM SCSI-0 device
cd2: 40.000MB/s transfers
cd2: Attempt to query device size failed: NOT READY, Medium not present - tray closed
re0: link state changed to UP
>Description:
LG external USB DVD-RW fails.
ugen2.3: <product 0x2502 vendor 0x0424> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
ugen2.9: <Super Multi Rewriter HLDS Inc.> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
Kernel says the following:
ugen2.3: <vendor 0x0424> at usbus2
uhub9: <vendor 0x0424 product 0x2502, class 9/0, rev 2.00/0.01, addr 3> on usbus2
uhub9: 2 ports with 2 removable, self powered
ugen2.9: <HLDS Inc.> at usbus2
umass1: <HLDS Inc. Super Multi Rewriter, class 0/0, rev 2.00/0.00, addr 9> on usbus2
umass1: SCSI over Bulk-Only; quirks = 0x0100
umass1:10:1:-1: Attached to scbus10
cd2 at umass-sim1 bus 1 scbus10 target 0 lun 0
cd2: <HL-DT-ST DVD-RAM GSA-E20N 1.03> Removable CD-ROM SCSI-0 device
cd2: 40.000MB/s transfers
cd2: Attempt to query device size failed: NOT READY, Medium not present
usb_alloc_device: set address 10 failed (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 10 failed, USB_ERR_STALLED
usbd_req_re_enumerate: addr=10, set address failed! (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 10 failed, USB_ERR_STALLED
usbd_req_re_enumerate: addr=10, set address failed! (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 10 failed, USB_ERR_STALLED
ugen2.10: <Unknown> at usbus2 (disconnected)
uhub_reattach_port: could not allocate new device
usb_alloc_device: set address 10 failed (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 10 failed, USB_ERR_STALLED
usbd_req_re_enumerate: addr=10, set address failed! (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 10 failed, USB_ERR_STALLED
usbd_req_re_enumerate: addr=10, set address failed! (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 10 failed, USB_ERR_STALLED
ugen2.10: <Unknown> at usbus2 (disconnected)
uhub_reattach_port: could not allocate new device
usb_alloc_device: set address 10 failed (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 10 failed, USB_ERR_STALLED
usbd_req_re_enumerate: addr=10, set address failed! (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 10 failed, USB_ERR_STALLED
usbd_req_re_enumerate: addr=10, set address failed! (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 10 failed, USB_ERR_STALLED
ugen2.10: <Unknown> at usbus2 (disconnected)
uhub_reattach_port: could not allocate new device
uhub_reattach_port: port 2 reset failed, error=USB_ERR_STALLED
uhub_reattach_port: device problem (USB_ERR_STALLED), disabling port 2
ugen2.3: <vendor 0x0424> at usbus2 (disconnected)
uhub9: at uhub8, port 4, addr 3 (disconnected)
ugen2.9: <HLDS Inc.> at usbus2 (disconnected)
umass1: at uhub9, port 1, addr 9 (disconnected)
(cd2:umass-sim1:1:0:0): lost device, 1 refs
(cd2:(pass7:umass-sim1:1:umass-sim1:1:0:0:0): removing device entry
0): passdevgonecb: devfs entry is gone
When trying to access the drive, device not configured error results.
All usbconfig commands become very slow when the drive is plugged in.
It seems that some other devices may fail at the same moment (grip
ripping a cd on another dvd drive might hang, for example).
I have tried some USB quirks
UQ_MSC_NO_GETMAXLUN (just a guess)
UQ_OPEN_CLEARSTALL (some discussion referred to this)
UQ_MSC_FORCE_PROTO_ATAPI (device seems to default to scsi)
None of these had any effect, other than last one changing protocol to ATAPI.
This device may have worked with past FreeBSD versions.
Drive is externally powered, not USB powered.
>How-To-Repeat:
Seems repeatable on 9-Stable. Has been for at least two months (host was 8.x before that).
>Fix:
No idea.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201211132152.qADLq6j9039168>