Date: Sat, 13 May 2006 11:18:00 +0000 From: "Angka H. K." <harikurniawan@gmail.com> To: "=?ISO-8859-1?Q?Dag-Erling_Sm=F8rgrav?=" <des@des.no> Cc: current@freebsd.org Subject: Re: DMA no active on HL-DT-STCD-RW/DVD Message-ID: <4c40c4e70605130418y3208840ctb0b1c7b1f61b7a74@mail.gmail.com> In-Reply-To: <861wuy8b84.fsf@xps.des.no> References: <4c40c4e70605130152s52fb3188nd847a0b8b0d46972@mail.gmail.com> <861wuy8b84.fsf@xps.des.no>
next in thread | previous in thread | raw e-mail | index | archive | help
------=_Part_31757_23614233.1147519080589
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
Here is the output :
angka# sysctl hw.ata.atapi_dma
hw.ata.atapi_dma: 1
I didn't play much with linux but on windows the difference only when
playing dvd movie. It's run smooter then FBSD. I use mplayer and
windvd in comparation.
On 5/13/06, Dag-Erling Sm=F8rgrav <des@des.no> wrote:
> "Angka H. K." <harikurniawan@gmail.com> writes:
> > My CD-RW/DVD drive cannot be set to dma. WinXP and Linux run it on
> > DMA. There is no problem accessing any supported media. 5.4-RELEASE
> > and 6.1-PRERELASE report the same thing. Currently I am using 7.0
>
> What does 'sysctl hw.ata.atapi_dma' say?
>
> > Attach is my dmesg output.
>
> Didn't make it. Mailman strips attachments with untrusted mime types;
> either set it to text/plain or just include the dmesg in your message.
>
> DES
> --
> Dag-Erling Sm=F8rgrav - des@des.no
>
------=_Part_31757_23614233.1147519080589
Content-Type: application/octet-stream; name=dmesg
Content-Transfer-Encoding: 7bit
X-Attachment-Id: f_en6a3auy
Content-Disposition: attachment; filename="dmesg"
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #5: Wed May 10 23:38:48 UTC 2006
root@angka.freebsd.pri:/usr/obj/usr/src/sys/ANGKA
ACPI APIC Table: <HP 308F >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.60GHz (1596.16-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0x180<EST,TM2>
AMD Features=0x100000<NX>
real memory = 258867200 (246 MB)
avail memory = 243806208 (232 MB)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ichwd module loaded
acpi0: <HP 308F> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xb0080000-0xb00fffff,0xc0000000-0xcfffffff,0xb0000000-0xb003ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
drm0: <Intel i915GM> on vgapci0
info: [drm] AGP at 0xb0080000 0MB
info: [drm] Initialized i915 1.4.0 20060119
vgapci1: <VGA-compatible display> at device 2.1 on pci0
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1820-0x183f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1840-0x185f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1860-0x187f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1880-0x189f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xb0040000-0xb00403ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0x3000-0x30ff mem 0xb0108000-0xb01080ff irq 16 at device 0.0 on pci6
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:c0:9f:ef:c6:21
pci6: <network> at device 6.0 (no driver attached)
cbb0: <TI6411 PCI-CardBus Bridge> at device 9.0 on pci6
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xb0108800-0xb0108fff,0xb0100000-0xb0103fff irq 22 at device 9.2 on pci6
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:76:40:e7
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:76:40:e7
fwe0: Ethernet address: 02:c0:9f:76:40:e7
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci6: <mass storage> at device 9.3 (no driver attached)
pci6: <base peripheral> at device 9.4 (no driver attached)
pcm0: <Intel ICH6 (82801FB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xb0040800-0xb00409ff,0xb0040400-0xb00404ff irq 17 at device 30.2 on pci0
pcm0: <Conexant CX20468-21 AC97 Codec>
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f irq 18 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_hpet0: <HPET - High Precision Event Timers> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
acpi_hpet0: Vendor: 0x8086
acpi_hpet0: Leg_Route_Cap: 1
acpi_hpet0: Count_Size_Cap: 1
acpi_hpet0: Num_Tim_Cap: 1
acpi_hpet0: Rev_id: 0x1
acpi_hpet0: Period: 69841279 fs (14318180 Hz)
acpi_hpet0: HPET attach
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcf800-0xd07ff,0xdf000-0xdf7ff,0xe0000-0xe3fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1596158273 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 57231MB <IC25N060ATMR04 0 MO3OAD5A> at ata0-master UDMA100
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4244N/1.02> at ata0-slave PIO4
pass0 at ata0 bus 0 target 1 lun 0
pass0: <HL-DT-ST RW/DVD GCC-4244N 1.02> Removable CD-ROM SCSI-0 device
pass0: 16.000MB/s transfers
Trying to mount root from ufs:/dev/ad0s2a
rl0: link state changed to DOWN
rl0: link state changed to UP
------=_Part_31757_23614233.1147519080589--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4c40c4e70605130418y3208840ctb0b1c7b1f61b7a74>