Date: Sat, 29 Jun 2002 16:31:10 +0600 From: "Dmitry A. Bondareff" <freebsd@mmk.ru> To: "Brooks Davis" <brooks@one-eyed-alien.net> Cc: <freebsd-hackers@FreeBSD.ORG>, <ambrisko@ambrisko.com> Subject: Re: PCI4800 Message-ID: <001a01c21f58$17f39e20$02020101@dimasic> References: <002901c21c6e$f391e3c0$02020101@dimasic> <20020625113928.B30424@Odin.AC.HMC.Edu>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_0017_01C21F8A.604E0930 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Ok! I've attached the files with configurations of PCI4800 and BR500 (external). External bridge send an error: > E Radio Error : 3 CRC errors Whereis problem ?? P.S. On the PCI4800 card Firmware v.4.25.30. ----- Original Message ----- From: "Brooks Davis" <brooks@one-eyed-alien.net> To: "Dmitry A. Bondareff" <freebsd@mmk.ru> Cc: <freebsd-hackers@FreeBSD.ORG> Sent: Wednesday, June 26, 2002 12:39 AM Subject: Re: PCI4800 ------=_NextPart_000_0017_01C21F8A.604E0930 Content-Type: text/plain; name="aironet2.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="aironet2.txt" ! CONFIGURATION of Aironet BR500E V8.24 BR500E_000000 =1B=3D configuration radio ssid "test"=20 configuration radio root on=20 configuration radio rates 1_11=20 configuration radio basic_rates 1_11=20 configuration radio frequency "2412"=20 configuration radio distance 0=20 configuration radio i80211 beacon 100=20 configuration radio i80211 dtim 1=20 configuration radio i80211 extend off=20 configuration radio i80211 bcst_ssid off=20 configuration radio i80211 rts 2312=20 configuration radio i80211 Privacy encryption off=20 configuration radio i80211 Privacy client open=20 configuration radio i80211 Encapsulation encap 802.1H=20 configuration radio i80211 Encapsulation remove all configuration radio linktests destination any=20 configuration radio linktests size 512=20 configuration radio linktests count 100=20 configuration radio linktests autotest once=20 configuration radio extended bridge_mode access_point=20 configuration radio extended time_retry 8=20 configuration radio extended count_retry 0=20 configuration radio extended roaming directed=20 configuration radio extended Balance off=20 configuration radio extended diversity off=20 configuration radio extended modulation cck=20 configuration radio extended power 1=20 configuration radio extended fragment 2048=20 configuration ethernet active on=20 configuration ethernet size 1518=20 configuration ethernet port auto=20 configuration ident inaddr 192.168.001.002=20 configuration ident inmask 255.255.255.000=20 configuration ident routing delete all configuration ident routing net 000.000.000.000 192.168.001.001 = 000.000.000.000 configuration ident dns1 000.000.000.000=20 configuration ident dns2 000.000.000.000=20 configuration ident domain ""=20 configuration ident name "BR500E_000000"=20 configuration ident location ""=20 configuration ident contact ""=20 configuration ident bootp_DHCP off=20 configuration ident class "BR500E"=20 configuration console Remote on=20 configuration console telnet on=20 configuration console http on=20 configuration console delete all configuration console communities remote off=20 configuration console type teletype=20 configuration console port rate 9600=20 configuration console port bits 8=20 configuration console port parity none=20 configuration console port flow xon/xoff=20 configuration console linemode off=20 configuration stp active off=20 configuration stp priority 8000=20 configuration stp hello_time 2=20 configuration stp forward_delay 15=20 configuration stp msg_age_timeout 20=20 configuration stp port port on=20 configuration stp port priority 80=20 configuration stp port cost 100=20 configuration mobile-IP AgentType off=20 configuration mobile-IP remove all configuration mobile-IP setup lifetime 600=20 configuration mobile-IP setup ReplayProt timestamps=20 configuration mobile-IP setup broadcasts off=20 configuration mobile-IP setup RegRequired on=20 configuration mobile-IP setup HostRedirects off=20 configuration mobile-IP advert AdvertType multicast=20 configuration mobile-IP advert AdvertInterval 5=20 configuration mobile-IP advert PrefixLen off=20 configuration mobile-IP advert AdvertRtrs on=20 configuration time time_server 000.000.000.000=20 configuration time sntp_server 000.000.000.000=20 configuration time offset 0=20 configuration time dst off=20 statistics display_time 10=20 statistics ipAdr off=20 association maximum 1024=20 association autoreg on=20 association staletime 350=20 association niddisp numeric=20 filter multicast default forward=20 filter multicast remove all filter multicast radio_mcst everywhere=20 filter node ethdst forward=20 filter node raddst forward=20 filter node source off=20 filter node remove all filter protocols default off=20 filter protocols remove all filter direction both=20 logs printlevel all=20 logs loglevel all=20 logs ledlevel error/severe=20 logs statistics ra rpa any logs statistics re rdf any logs statistics re rce any logs statistics re trr any logs statistics re tmr any logs statistics re ter any logs statistics re tho any logs bnodelog on=20 logs snmp trapdest none=20 logs snmp trapcomm "public"=20 logs snmp loglevel off=20 logs snmp authtrap off=20 logs syslog 192.168.001.001=20 logs syslevel all=20 logs facility 23=20 logs rcvsyslog on=20 diagnostics network escape "^X^Y^Z"=20 diagnostics load ftp dest 000.000.000.000=20 diagnostics load ftp username ""=20 diagnostics load ftp filename ""=20 diagnostics load distribute type firmware=20 diagnostics load distribute control newer=20 diagnostics load distribute remove all configuration ident bootp_DHCP off=20 configuration ident class "BR500E"=20 > 0:08:50 E Radio Error : 3 CRC errors ------=_NextPart_000_0017_01C21F8A.604E0930 Content-Type: text/plain; name="aironet.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="aironet.txt" xl0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500=0A= inet 1.1.2.2 netmask 0xffffff00 broadcast 1.1.2.255=0A= ether 00:60:08:30:21:c5 =0A= media: Ethernet autoselect (100baseTX <full-duplex>)=0A= status: active=0A= an0: flags=3D8847<UP,BROADCAST,DEBUG,RUNNING,SIMPLEX,MULTICAST> mtu 1500=0A= inet 1.1.5.1 netmask 0xffffff00 broadcast 1.1.5.255=0A= ether 00:40:96:28:8e:21 =0A= media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)=0A= status: no carrier=0A= ssid test=0A= stationname dimasic=0A= channel 1 authmode OPEN powersavemode OFF powersavesleep 200=0A= wepmode OFF weptxkey 2=0A= wepkey 1:64-bit wepkey 2:64-bit=0A= lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384=0A= inet 127.0.0.1 netmask 0xff000000 =0A= ppp0: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1500=0A= faith0: flags=3D8002<BROADCAST,MULTICAST> mtu 1500=0A= Operating mode: [ infrastructure ]=0A= Receive mode: [ broadcast/multicast/unicast ]=0A= Fragment threshold: [ 2312 ]=0A= RTS threshold: [ 2312 ]=0A= MAC address: [ 00:40:96:28:8e:21 ]=0A= Supported rates: [ 1.0Mbps 2.0Mbps 5.5Mbps 11.0Mbps ]=0A= Short retry limit: [ 16 ]=0A= Long retry limit: [ 16 ]=0A= TX MSDU lifetime: [ 5000 ]=0A= RX MSDU lifetime: [ 10000 ]=0A= Stationary: [ Off ]=0A= Ordering: [ Off ]=0A= Device type: [ PC4800 ]=0A= Scanning mode: [ active ]=0A= Probe delay: [ 3 ]=0A= Probe energy timeout: [ 3 ]=0A= Probe response timeout: [ 20 ]=0A= Beacon listen timeout: [ 40 ]=0A= IBSS join network timeout: [ 10000 ]=0A= Authentication timeout: [ 2000 ]=0A= WEP enabled: [ no ]=0A= Authentication type: [ open ]=0A= Association timeout: [ 5000 ]=0A= Specified AP association timeout: [ 10000 ]=0A= Offline scan interval: [ 12820 ]=0A= Offline scan duration: [ 0 ]=0A= Link loss delay: [ 0 ]=0A= Max beacon loss time: [ 500 ]=0A= Refresh interval: [ 10000 ]=0A= Power save mode: [ none ]=0A= Sleep through DTIMs: [ Off ]=0A= Power save listen interval: [ 200 ]=0A= Power save fast listen interval: [ 100 ]=0A= Power save listen decay: [ 2 ]=0A= Power save fast listen decay: [ 200 ]=0A= AP/ad-hoc Beacon period: [ 100 ]=0A= AP/ad-hoc ATIM duration: [ 0 ]=0A= AP/ad-hoc current channel: [ 1 ]=0A= AP/ad-hoc DTIM period: [ 1 ]=0A= Radio type: [ 802.11 DS ]=0A= RX Diversity: [ antenna 1 only ]=0A= TX Diversity: [ antenna 1 only ]=0A= Transmit power level: [ 100 ]=0A= RSS threshold: [ 0 ]=0A= Node name: [ dimasic ]=0A= ARL threshold: [ 65535 ]=0A= ARL decay: [ 65535 ]=0A= ARL delay: [ 65535 ]=0A= =0A= WEP Key status:=0A= Key 0 is set 40 bits=0A= Key 1 is set 40 bits=0A= The active transmit key is 1=0A= Access point 1: [ 00:00:00:00:00:00 ]=0A= Access point 2: [ 00:00:00:00:00:00 ]=0A= Access point 3: [ 00:00:00:00:00:00 ]=0A= Access point 4: [ 00:41:06:28:a0:2a ]=0A= OUI: [ 00:40:96 ]=0A= Product number: [ 7 ]=0A= Manufacturer name: [ Aironet Wireless Communications ]=0A= Produce name: [ PC4800 ]=0A= Firmware version: [ 4 ]=0A= OEM MAC address: [ 00:40:96:28:8e:21 ]=0A= Aironet MAC address: [ 00:40:96:28:8e:21 ]=0A= Radio type: [ 802.11 DS ]=0A= Regulatory domain: [ 0 ]=0A= Assigned CallID: [ ff:ff:ff:ff:ff:ff ]=0A= Supported speeds: [ 1.0Mbps 2.0Mbps 5.5Mbps 11.0Mbps ]=0A= RX Diversity: [ antenna 1 and 2 ]=0A= TX Diversity: [ antenna 1 and 2 ]=0A= Supported power levels: [ 1 5 20 50 100 0 0 0 ]=0A= Hardware revision: [ 00:52 ]=0A= Software revision: [ 04:25 ]=0A= Software subrevision: [ 00:1e ]=0A= Interface revision: [ 00:00 ]=0A= Bootblock revision: [ 01:27 ]=0A= MAC address: [ 00:40:96:28:8e:21 ]=0A= Operating mode: [ configured MAC ON RX ON ]=0A= Error code: [ 00 ]=0A= Signal quality: [ 8f ]=0A= Signal strength: [ 90% ]=0A= Current TX rate: [ 11 ]=0A= Current SSID: [ test ]=0A= Current AP name: [ BR500E_000000 BE ]=0A= Current BSSID: [ ff:ff:ff:ff:ff:ff ]=0A= Beacon period: [ 100 ]=0A= DTIM period: [ 1 ]=0A= ATIM duration: [ 0 ]=0A= HOP period: [ 200 ]=0A= Channel set: [ 0 ]=0A= Current channel: [ 1 ]=0A= Hops to backbone: [ 1 ]=0A= Total AP load: [ 0 ]=0A= Our generated load: [ 0 ]=0A= Accumulated ARL: [ 0 ]=0A= RX overruns: [ 882 ]=0A= RX PLCP CSUM errors: [ 46 ]=0A= RX PLCP format errors: [ 0 ]=0A= RX PLCP length errors: [ 0 ]=0A= RX MAC CRC errors: [ 6 ]=0A= RX MAC CRC OK: [ 139 ]=0A= RX WEP errors: [ 0 ]=0A= RX WEP OK: [ 0 ]=0A= Long retries: [ 0 ]=0A= Short retries: [ 0 ]=0A= Retries exhausted: [ 0 ]=0A= Bad ACK: [ 0 ]=0A= Bad CTS: [ 0 ]=0A= RX good ACKs: [ 6 ]=0A= RX good CTSs: [ 0 ]=0A= TX good ACKs: [ 31 ]=0A= TX good RTSs: [ 0 ]=0A= TX good CTSs: [ 0 ]=0A= LMAC multicasts transmitted: [ 0 ]=0A= LMAC broadcasts transmitted: [ 3819 ]=0A= LMAC unicast frags transmitted: [ 6 ]=0A= LMAC unicasts transmitted: [ 6 ]=0A= Beacons transmitted: [ 0 ]=0A= Beacons received: [ 95 ]=0A= Single transmit collisions: [ 0 ]=0A= Multiple transmit collisions: [ 0 ]=0A= Transmits without deferrals: [ 0 ]=0A= Transmits deferred due to protocol: [ 0 ]=0A= Transmits deferred due to energy detect: [ 1 ]=0A= RX duplicate frames/frags: [ 0 ]=0A= RX partial frames: [ 0 ]=0A= TX max lifetime exceeded: [ 0 ]=0A= RX max lifetime exceeded: [ 0 ]=0A= Sync lost due to too many missed beacons: [ 0 ]=0A= Sync lost due to ARL exceeded: [ 0 ]=0A= Sync lost due to deauthentication: [ 0 ]=0A= Sync lost due to disassociation: [ 0 ]=0A= Sync lost due to excess change in TSF timing: [ 0 ]=0A= Host transmitted multicasts: [ 0 ]=0A= Host transmitted broadcasts: [ 0 ]=0A= Host transmitted unicasts: [ 0 ]=0A= Host transmission failures: [ 0 ]=0A= Host received multicasts: [ 0 ]=0A= Host received broadcasts: [ 0 ]=0A= Host received unicasts: [ 0 ]=0A= Host receive discards: [ 0 ]=0A= HMAC transmitted multicasts: [ 0 ]=0A= HMAC transmitted broadcasts: [ 3855 ]=0A= HMAC transmitted unicasts: [ 6 ]=0A= HMAC transmissions failed: [ 36 ]=0A= HMAC received multicasts: [ 0 ]=0A= HMAC received broadcasts: [ 102 ]=0A= HMAC received unicasts: [ 26 ]=0A= HMAC receive discards: [ 5 ]=0A= HMAC transmits accepted: [ 128 ]=0A= SSID mismatches: [ 0 ]=0A= Access point mismatches: [ 0 ]=0A= Speed mismatches: [ 0 ]=0A= Authentication rejects: [ 0 ]=0A= Authentication timeouts: [ 5 ]=0A= Association rejects: [ 0 ]=0A= Association timeouts: [ 0 ]=0A= Management frames received: [ 0 ]=0A= Management frames transmitted: [ 0 ]=0A= Refresh frames received: [ 0 ]=0A= Refresh frames transmitted: [ 0 ]=0A= Poll frames received: [ 0 ]=0A= Poll frames transmitted: [ 0 ]=0A= Host requested sync losses: [ 0 ]=0A= Host transmitted bytes: [ 0 ]=0A= Host received bytes: [ 0 ]=0A= Uptime in microseconds: [ 1576610196 ]=0A= Uptime in seconds: [ 1577 ]=0A= Sync lost due to better AP: [ 0 ]=0A= SSID 1: [ test ]=0A= SSID 2: [ ]=0A= SSID 3: [ ]=0A= ------=_NextPart_000_0017_01C21F8A.604E0930-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001a01c21f58$17f39e20$02020101>