From owner-freebsd-questions  Fri Dec 22 22:23:02 1995
Return-Path: owner-questions
Received: (from root@localhost)
          by freefall.freebsd.org (8.7.3/8.7.3) id WAA21431
          for questions-outgoing; Fri, 22 Dec 1995 22:23:02 -0800 (PST)
Received: from ohio.river.org (ohio.river.org [199.4.64.219])
          by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id WAA21425
          for <questions@freebsd.org>; Fri, 22 Dec 1995 22:22:56 -0800 (PST)
Received: (from dhawk@localhost) by ohio.river.org (8.6.12/8.6.11) id WAA06940; Fri, 22 Dec 1995 22:22:01 -0800
From: David Hawkins <dhawk@river.org>
Message-Id: <199512230622.WAA06940@ohio.river.org>
Subject: Re: Upgrade to 2.1 Problems -- unusable kernel
To: julian@jhome.DIALix.COM (Julian Elischer)
Date: Fri, 22 Dec 1995 22:22:01 -0800 (PST)
Cc: dhawk@river.org, questions@freebsd.org
In-Reply-To: <199512230431.MAA06858@jhome.DIALix.COM> from "Julian Elischer" at Dec 23, 95 12:31:54 pm
X-Mailer: ELM [version 2.4 PL23]
Content-Type: text
Sender: owner-questions@freebsd.org
Precedence: bulk

> > I used the new cd-rom to upgrade this system to 2.1 -- or tried to.
> > The upgrade section of the process went ok and I merged in the /etc
> > stuff. Booted off the generic kernel and it couldn't find my
> > network card (3c509) at port 300, irq 10. No biggie, had the
> > same problem with 2.0.5 and had to compile that into the kernel.
 
> doesn't it find it with GENERIC if you boot with '-c'
> to allow you to change its address?
 
No. Here's what happened with all the reboots: (from messages file)
2.1 configuring with -c
Dec 22 12:14:30 ohio /kernel: ep0      0x300      10    -1    0x0     0        0     0x0        Yes
and I disabled anything that wasn't being found during -c

Booting with 2.1 GENERIC kernel with 'link2' on ifconfig_ep0
Dec 22 12:14:38 ohio /kernel: ep0 not found at 0x300

Booting with 2.1 GENERIC kernel removing 'link2' from ifconfig_ep0
Dec 22 12:19:11 ohio /kernel: ep0 not found at 0x300

2.1 configuring with -c
Dec 22 12:24:28 ohio /kernel: ep0      0x300      10    -1    0x0     0        0     0x0        Yes
Dec 22 12:24:30 ohio /kernel: config> port ep0 300
Dec 22 12:24:30 ohio /kernel: config> irq ep0 10

Booting with 2.1 GENERIC
Dec 22 12:24:35 ohio /kernel: ep0 not found at 0x12c

Booting with 2.1 GENERIC (ok, I'm stubborn)
Dec 22 12:28:41 ohio /kernel: ep0 not found at 0x12c

Booting with 2.0.5 with  port compiled in kernel
CONFIG file has: 
device ep0 at isa? port 0x300 net irq 10 vector epintr
Dec 22 12:34:01 ohio /kernel: ep0 at 0x280-0x28f irq 15 on isa
Dec 22 12:34:01 ohio /kernel: ep0: aui/bnc/utp[*AUI*] address 00:20:af:39:0f:1a irq 15

Booting with new 2.1 kernel with port 300 compiled in kernel
(using same   device ep0  line as the 2.0.5 kernel config)
Dec 22 13:00:07 ohio /kernel: ep0 not found at 0x300

Booting with 2.0.5 with  port compiled in kernel
Dec 22 13:03:46 ohio /kernel: ep0 at 0x280-0x28f irq 15 on isa
Dec 22 13:03:46 ohio /kernel: ep0: aui/bnc/utp[*AUI*] address 00:20:af:39:0f:1a irq 15