Date: Mon, 21 Jul 2003 20:08:49 +0200 From: Bernd Walter <ticso@cicely8.cicely.de> To: freebsd-alpha@freebsd.org Subject: panic: cpu_initclocks: no clock attached Message-ID: <20030721180848.GC32645@cicely8.cicely.de>
next in thread | raw e-mail | index | archive | help
Note the following line:
pci1: <old, non-VGA display device> at device 1.0 (no driver attached)
This should have been the EISA bridge as in the older kernel:
eisab0: <PCI-EISA bridge> at device 1.0 on pci1
Entering /boot/kernel/kernel at 0xfffffc0000339c80...
sio1: gdb debugging port
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #0: Tue Jul 15 10:46:54 CEST 2003
ticso@cicely12.cicely.de:/var/d3/obj/var/d3/c12-2003-07-14/src/sys/CICELY12
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc000072a000.
AlphaServer 4100
AlphaServer 4100 5/533 4MB, 531MHz
8192 byte page size, 3 processors.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x4000200020117
real memory = 2145345536 (2045 MB)
avail memory = 2081587200 (1985 MB)
CONFIG: invalid hint 'hint.mcclock0='
FreeBSD/SMP: Multiprocessor System Detected: 3 CPUs
mcbus0: <MCBUS Backplane Bus>
pcib0: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 5
pcib0: Horse Revision 3, Left Handed Saddle Revision 0, CAP Revision 1
pci0: <PCI bus> on pcib0
sym0: <810> port 0x1ffde00-0x1ffdeff mem 0x7df6e00-0x7df6eff at device 1.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: interrupting at IRQ 0x10 (vec 0xb40)
pcib2: <PCI-PCI bridge> at device 2.0 on pci0
pci2: <PCI bus> on pcib2
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1ffef00-0x1ffefff mem 0x7eef000-0x7eeffff at device 0.0 on pci2
pcib2: slot 0 INTA is routed to irq 0
isp0: interrupting at IRQ 0x0 (vec 0xb80)
sym1: <875> port 0x1ffdf00-0x1ffdfff mem 0x7df7000-0x7df7fff,0x7df6f00-0x7df6fff at device 3.0 on pci0
sym1: Tekram NVRAM, ID 7, Fast-20, SE, parity checking
sym1: interrupting at IRQ 0x4 (vec 0xbc0)
pcib3: <PCI-PCI bridge> at device 4.0 on pci0
pci3: <PCI bus> on pcib3
pci3: <mass storage, SCSI> at device 4.0 (no driver attached)
pci3: <memory> at device 5.0 (no driver attached)
pci3: <mass storage, SCSI> at device 8.0 (no driver attached)
pci3: <mass storage, SCSI> at device 12.0 (no driver attached)
pcib1: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 4
pcib1: Horse Revision 3, Left Handed Saddle Revision 0, CAP Revision 1
pci1: <PCI bus> on pcib1
illegal PCI extended capability offset 8266240
pci1: <old, non-VGA display device> at device 1.0 (no driver attached)
pci1: <mass storage, SCSI> at device 2.0 (no driver attached)
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x1fffe00-0x1fffe3f mem 0x7e00000-0x7efffff,0x7dde000-0x7ddefff at device 3.0 on pci1
fxp0: Ethernet address 00:90:27:a2:6d:db
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: interrupting at IRQ 0x4 (vec 0x9c0)
pci1: <mass storage, SCSI> at device 5.0 (no driver attached)
panic: cpu_initclocks: no clock attached
cpuid = 0;
panic
Stopped at Debugger+0x38: zapnot v0,#0xf,v0 <v0=0x0>
This is with an older kernel:
[...]
FreeBSD 5.1-CURRENT #1: Thu Jun 19 20:58:48 CEST 2003
ticso@cicely12.cicely.de:/var/d3/c12-2003-06-13/src/sys/alpha/compile/CICELY12
[...]
eisab0: <PCI-EISA bridge> at device 1.0 on pci1
isa0: <ISA bus> on eisab0
pci1: <mass storage, SCSI> at device 2.0 (no driver attached)
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x1fffe00-0x1fffe3f mem 0x7e00000-0x7efffff,0x7dde000-0x7ddefff irq 4 at device 3.0 on pci1
fxp0: Ethernet address 00:90:27:a2:6d:db
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: interrupting at IRQ 0x4 (vec 0x9c0)
pci1: <mass storage, SCSI> at device 5.0 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
Timecounter "i8254" frequency 1193182 Hz
Timecounters tick every 0.833 msec
Waiting 15 seconds for SCSI devices to settle
[...]
--
B.Walter BWCT http://www.bwct.de
ticso@bwct.de info@bwct.de
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030721180848.GC32645>