Date: Mon, 14 Apr 1997 13:18:36 -0600 From: vanmaren@fast.cs.utah.edu (Kevin Van Maren) To: terry@lambert.org Cc: freebsd-smp@freebsd.org Subject: Re: Tyan ATX 1668 Message-ID: <199704141918.NAA13963@fast.cs.utah.edu>
next in thread | raw e-mail | index | archive | help
>I stand corrected. > >You know, of course, that there isn't a 5th slot, right? It's a >second fourth slot. Huh? There *are* *5* slots. Look at http://www.tyan.com/html/s166{2,8}.html for a picture. >It's probably more correct to claim that they don't have an entry >for a fifth device... > Here is `part' of a dmesg output (stripped out disks, etc) for a S1662 motherboard. Only one processor right now, but I'm using this one since it has 5 PCI cards in it (plus ISA video). chip0 <Intel 82440FX (Natoma) PCI and memory controller> rev 2 on pci0:0 chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:7:0 chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1 chip3 <DEC 21050 PCI-PCI bridge> rev 1 on pci0:10 ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 5 on pci0:11 ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs de0 <Digital DC21140 Fast Ethernet> rev 17 int a irq 9 on pci0:12 de0: SMC 9332 DC21140 [10-100Mb/s] pass 1.1 de0: address 00:00:c0:50:0c:9f de0: enabling 100baseTX port ahc1 <Adaptec 2940 SCSI host adapter> rev 0 int a irq 10 on pci0:13 ahc1: aic7870 Wide Channel, SCSI Id=7, 16 SCBs de1 <Digital DC21140 Fast Ethernet> rev 18 int a irq 11 on pci0:14 de1: SMC 9332 DC21140 [10-100Mb/s] pass 1.2 de1: address 00:00:c0:43:65:e4 de1: enabling 100baseTX port Probing for devices on PCI bus 1: de2 <Digital DC21040 Ethernet> rev 35 int a irq 11 on pci1:4 de2: DC21040 [10Mb/s] pass 2.3 de2: address 00:c0:95:f4:04:ba de2: enabling BNC/AUI port de3 <Digital DC21040 Ethernet> rev 35 int a irq 10 on pci1:5 de3: (null)DC21040 [10Mb/s] pass 2.3 de3: address 00:c0:95:f4:04:bb de3: enabling BNC/AUI port PCI Bus #0 has 5 slots: 10: Pci bridge 4: Network (de2,irq 11) 5: Network (de3,irq 11, says 10) 11: Mass Storage (ahc0,irq 5) 12: Network (de0,irq 9) 13: Mass Storage (de1,irq 10) 14: Network (ahc1,irq 11) This is with FreeBSD 2.1.7.1; de2/de3 is a Zynx dual 10Mb ethernet adapter. Kevin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199704141918.NAA13963>