Date: Sun, 27 Apr 2014 19:40:38 -0600 (MDT) From: Warren Block <wblock@wonkity.com> To: Bernt Hansson <bah@bananmonarki.se> Cc: "Richard L. Houston" <rhouston@rlhc.net>, freebsd-questions <freebsd-questions@freebsd.org> Subject: Re: FreeBSD 10 USB3/Vantec NexStar HX4R Message-ID: <alpine.BSF.2.00.1404271938550.82848@wonkity.com> In-Reply-To: <535DA0D7.5070707@bananmonarki.se> References: <16437454.1284.1398642350202.JavaMail.root@rlhc.net> <535DA0D7.5070707@bananmonarki.se>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 28 Apr 2014, Bernt Hansson wrote: > On 2014-04-28 01:45, Richard L. Houston wrote: >> Hi all. First time poster and noob to FreeBSD. >> Apologies if this have been asked and answered. > >> I have a FreeBSD 10 box setup and I plan on using it as a backup storage >> server. As this will not be a high IO system, just for storing backups, I >> would like to use a USB3 attached Vantec NexStar Hx4R 4 disk enclosure and >> use ZFS to zraid the disks. I am using ZFS on several Linux server as it >> stands and quite comfortable with that side of things. >> >> The issue I am running into is the following error when I bring the >> enclosure on line (From dmesg): >> ugen0.2: <vendor 0x152d> at usbus0 >> umass0: <vendor 0x152d product 0x0551, class 0/0, rev 3.00/1.00, addr 1> on >> usbus0 >> umass0: SCSI over Bulk-Only; quirks = 0x0000 >> umass0: Get Max Lun not supported (USB_ERR_TIMEOUT) >> umass0:3:0:-1: Attached to scbus3 >> (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 >> (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error >> (probe0:umass-sim0:0:0:0): Retrying command >> (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 >> (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error >> (probe0:umass-sim0:0:0:0): Retrying command >> (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 >> (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error >> (probe0:umass-sim0:0:0:0): Retrying command >> (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 >> (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error >> (probe0:umass-sim0:0:0:0): Retrying command >> (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 >> (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error >> (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted >> >> I have applied all patches up to date. I searched around on the issue but >> could not find any resolution for the issue. >> >> Any help getting this unit to work would be much appreciated. The 4 disks >> already have a working ZFS pool created on another system. I have attached >> the unit to a second Linux, sorry to be using fowl language here ;), system >> with ZFS and the unit and ZFS work just fine. >> >> Thanks in advance! > > I do not think you can setup ZFS on linux or solaris and then run it on fbsd. That's the goal, but this a hardware error. Most likely the enclosure needs a USB quirk or patch.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.1404271938550.82848>