Date: Wed, 15 Oct 1997 12:24:39 +0930 From: Greg Lehey <grog@lemis.com> To: David Kulp <dkulp@neomorphic.com> Cc: Doug White <dwhite@resnet.uoregon.edu>, freebsd-questions@FreeBSD.ORG Subject: Re: lp0 laplink gateway? Message-ID: <19971015122439.05390@lemis.com> In-Reply-To: <199710150134.SAA00288@diz.pt.scruznet.com>; from David Kulp on Tue, Oct 14, 1997 at 06:34:55PM -0700 References: <34434E5E.41C67EA6@neomorphic.com> <Pine.BSF.3.96.971014100123.2456H-100000@gdi.uoregon.edu> <199710150134.SAA00288@diz.pt.scruznet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Oct 14, 1997 at 06:34:55PM -0700, David Kulp wrote: > Thanks, Doug. You were right, I was missing the > > gateway=YES > > line in my /etc/sysconfig, but it didn't solve the problem just the > same. I turned off routed per your comment, and so far no success. That's not enough by itself. You also should do either: 1. Reboot (bad idea) 2. Enable *now* (good idea): # sysctl -w net.inet.ip.forwarding=1 > All the ip's are in my subnet. To be concrete, here is the netstat, > ifconfig, route, and ping results. If someone has the patience to > look at this, I'd appreciate any feedback. > > m1 (205.179.170.68) is trying to connect to m3 (205.179.170.65) via m2 > (205.179.170.66): > > m1 > ifconfig -a > lp0: flags=8851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet 205.179.170.68 --> 205.179.170.66 netmask 0xffffff00 You should set the net mask to 0xffffffff. But this isn't your problem. I don't see anything wrong with the rest. Greg
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19971015122439.05390>