From owner-freebsd-stable Fri May 11 3:51:20 2001 Delivered-To: freebsd-stable@freebsd.org Received: from imf08bis.bellsouth.net (mail108.mail.bellsouth.net [205.152.58.48]) by hub.freebsd.org (Postfix) with ESMTP id 3345E37B423; Fri, 11 May 2001 03:51:06 -0700 (PDT) (envelope-from lauasanf@bellsouth.net) Received: from bellsouth.net ([66.20.111.204]) by imf08bis.bellsouth.net (InterMail vM.5.01.01.01 201-252-104) with ESMTP id <20010511105148.SCMA7553.imf08bis.bellsouth.net@bellsouth.net>; Fri, 11 May 2001 06:51:48 -0400 Message-ID: <3AFBC42B.2020109@bellsouth.net> Date: Fri, 11 May 2001 05:51:23 -0500 From: Drew Sanford User-Agent: Mozilla/5.0 (X11; U; Linux 2.2.12 i386; en-US; m18) Gecko/20010131 Netscape6/6.01 X-Accept-Language: en MIME-Version: 1.0 To: George Reid Cc: stable@FreeBSD.org Subject: Re: Sound (PCM) in 4.3 References: Content-Type: multipart/mixed; boundary="------------030907000708060602010102" Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. --------------030907000708060602010102 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Here's pciconf -l: chip0@pci0:0:0: class=0x060000 card=0x80331043 chip=0x03051106 rev=0x02 hdr=0x00 pcib2@pci0:1:0: class=0x060400 card=0x00000080 chip=0x83051106 rev=0x00 hdr=0x01 isab0@pci0:4:0: class=0x060100 card=0x80331043 chip=0x06861106 rev=0x22 hdr=0x00 atapci0@pci0:4:1: class=0x01018a card=0x00000000 chip=0x05711106 rev=0x10 hdr=0x00 uhci0@pci0:4:2: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x10 hdr=0x00 uhci1@pci0:4:3: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x10 hdr=0x00 chip1@pci0:4:4: class=0x060000 card=0x00000000 chip=0x30571106 rev=0x30 hdr=0x00 dc0@pci0:10:0: class=0x020000 card=0xf0041385 chip=0x000211ad rev=0x20 hdr=0x00 atapci1@pci0:17:0: class=0x018000 card=0x4d33105a chip=0x0d30105a rev=0x02 hdr=0x00 none0@pci1:0:0: class=0x030000 card=0x2179102b chip=0x0525102b rev=0x04 hdr=0x00 and boot -v dmesg: Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-STABLE #12: Mon May 7 17:39:13 CDT 2001 lauasanf@colossus.cotharyus.net:/usr/src/sys/compile/Colossus Calibrating clock(s) ... TSC clock: 807167867 Hz, i8254 clock: 1193152 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 807193881 Hz CPU: AMD Athlon(tm) Processor (807.19-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x630 Stepping = 0 Features=0x183f9ff AMD Features=0xc0440000<,AMIE,DSP,3DNow!> Data TLB: 24 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 1 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 268353536 (262064K bytes) Physical memory chunk(s): 0x00001000 - 0x0009dfff, 643072 bytes (157 pages) 0x0037a000 - 0x0ffe3fff, 264675328 bytes (64618 pages) avail memory = 257925120 (251880K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f92a0 bios32: Entry = 0xf0ef0 (c00f0ef0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x10f0 pnpbios: Found PnP BIOS data at 0xc00fc2b0 pnpbios: Entry = f0000:c2e0 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: ACPI: 000f6750 Preloaded elf kernel "kernel" at 0xc0354000. Pentium Pro MTRR support enabled pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106) pcib-: pcib0 exists, using next available unit number npx0: on motherboard npx0: INT 16 interface pci_opepci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106) pcib0: on motherboard found-> vendor=0x1106, dev=0x0305, revid=0x02 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e4000000, size 26 found-> vendor=0x1106, dev=0x8305, revid=0x00 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x1106, dev=0x0686, revid=0x22 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1106, dev=0x0571, revid=0x10 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000d800, size 4 found-> vendor=0x1106, dev=0x3038, revid=0x10 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=5 map[20]: type 1, range 32, base 0000d400, size 5 found-> vendor=0x1106, dev=0x3038, revid=0x10 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=5 map[20]: type 1, range 32, base 0000d000, size 5 found-> vendor=0x1106, dev=0x3057, revid=0x30 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x11ad, dev=0x0002, revid=0x20 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base 0000a400, size 8 map[14]: type 1, range 32, base e0000000, size 8 found-> vendor=0x105a, dev=0x0d30, revid=0x02 class=01-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base 0000a000, size 3 map[14]: type 1, range 32, base 00009800, size 2 map[18]: type 1, range 32, base 00009400, size 3 n(1): mode 1 addr port (0x0cf8) is 0x00000000 map[1c]: type 1, range 32, base 00009000, size 2 map[20]: type 1, range 32, base 00008800, size 6 map[24]: type 1, range 32, base df800000, size 17 pci0: on pcib0 pcib2: at device 1.0 on pci0 found-> vendor=0x102b, dev=0x0525, revid=0x04 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base e2000000, size 25 map[14]: type 1, range 32, base e1000000, size 14 map[18]: type 1, range 32, base e0800000, size 23 pci1: on pcib2 pci1: (vendor=0x102b, dev=0x0525) at 0.0 irq 11 isab0: at device 4.0 on pci0 isa0: on isab0 atapci0: port 0xd800-0xd80f at device 4.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd800 ata0: mask=02 status0=ff status1=50 ata0: mask=02 ostat0=ff ostat2=50 ata0-slave: ATAPI probe a=14 b=eb ata0: mask=02 status0=ff status1=00 ata0: devices=08 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd808 ata1: mask=03 status0=40 status1=40 ata1: mask=03 ostat0=40 ostat2=40 ata1-master: ATAPI probe a=40 b=40 ata1-slave: ATAPI probe a=40 b=40 ata1: mask=03 status0=40 status1=40 ata1-master: ATA probe a=a5 b=a5 ata1-slave: ATA probe a=a5 b=a5 ata1: devices=03 ata1: at 0x170 irq 15 on atapci0 uhci0: port 0xd400-0xd41f irq 5 at device 4.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xd000-0xd01f irq 5 at device 4.3 on pci0 using shared irq5. usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2 uhub2: 4 ports with 4 removable, self powered dc0: <82c169 PNIC 10/100BaseTX> port 0xa400-0xa4ff mem 0xe0000000-0xe00000ff irq 9 at device 10.0 on pci0 dc0: Ethernet address: 00:a0:cc:40:93:80 miibus0: on dc0 ukphy0: on miibus0 ukphy0: OUI 0x001018, model 0x0021, rev. 2 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: dc0 attached atapci1: port 0x8800-0x883f,0x9000-0x9003,0x9400-0x9407,0x9800-0x9803,0xa000-0xa007 mem 0xdf800000-0xdf81ffff irq 10 at device 17.0 on pci0 ata-: ata2 exists, using next available unit number ata2: iobase=0xa000 altiobase=0x9802 bmaddr=0x8800 ata2: mask=03 status0=50 status1=00 ata2: mask=03 ostat0=50 ostat2=00 ata2-master: ATAPI probe a=00 b=00 ata2-slave: ATAPI probe a=00 b=00 ata2: mask=03 status0=50 status1=00 ata2-master: ATA probe a=01 b=a5 ata2: devices=01 ata2: at 0xa000 on atapci1 ata3: iobase=0x9400 altiobase=0x9002 bmaddr=0x8808 ata3: mask=00 status0=ff status1=ff ata3: probe allocation failed pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106) pci-: pci1 exists, using next available unit number pcib1: on motherboard pci2: on pcib1 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices ata4 failed to probe at port 0x1f0 irq 14 on isa0 ata5 failed to probe at port 0x170 irq 15 on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 Trying Read_Port at 383 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: at port 0x378-0x37f on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: IEEE1284 device found /NIBBLE/ECP/NIBBLE_ID/ECP_ID/Extensibility Link Probing for PnP devices on ppbus0: ppbus0: MLC,PCL,PML lpt0: on ppbus0 lpt0: Polled port isa_probe_children: probing PnP devices BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ata1-master: ata_command: timeout waiting for intr ata1-master: identify failed ata2-master: success setting UDMA5 on Promise chip Creating DISK ad4 Creating DISK wd4 ad4: ATA-5 disk at ata2-master ad4: 43979MB (90069840 sectors), 89355 cyls, 16 heads, 63 S/T, 512 B/S ad4: 16 secs/int, 1 depth queue, UDMA100 ad4: piomode=4 dmamode=2 udmamode=5 cblid=1 Promise check1 failed ad4: 43979MB [89355/16/63] at ata2-master UDMA100 ata0-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata0-slave: success setting PIO4 on generic chip acd0: CDROM drive at ata0 as slave acd0: read 5500KB/s (5500KB/s), 128KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm audio disc loaded, unlocked, lock protected Mounting root from ufs:/dev/ad4s1a ad4s1: type 0xa5, start 63, end = 2088449, size 2088387 : OK ad4s2: type 0xa5, start 2088450, end = 3132674, size 1044225 : OK ad4s3: type 0xa5, start 3132675, end = 90060389, size 86927715 : OK start_init: trying /sbin/init Linux-ELF exec handler installed I've also attached the config file for the kernel. George Reid wrote: > On Thu, 10 May 2001, Drew Sanford wrote: > > >> I've just cvsup'd 4.3, and my sound appears to have broken during the >> upgrade. I've got an SBLive! that has worked reliably under everything >> since 4.0-RELEASE. Did anything change, or did PCM just break? > > > Yes, stuff changed. > > Some error messages (boot -v dmesg, pciconf -l etc) would help. > > greid > -- > +-------------------+---------------------+ > | George Reid | FreeBSD Committer | > | +44 7740 197460 | greid@FreeBSD.org | > +-------------------+---------------------+ -- Cotharyus lauasanf@bellsouth.net ICQ: 8690555 --------------030907000708060602010102 Content-Type: text/plain; name="Colossus" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="Colossus" machine i386 cpu I686_CPU ident Colossus maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options INET #InterNETworking #options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options NFS #Network Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev device isa device eisa device pci # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI devices needed for USB storage support device scbus # SCSI bus (required) device da # Direct Access (disks) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 # Parallel port device ppc0 at isa? #irq 5 device ppbus # Parallel port bus (required) device lpt # Printer #device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # SB Live support device pcm # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners # USB Ethernet, requires mii device aue # ADMtek USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernet --------------030907000708060602010102-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message