From owner-freebsd-hardware Mon Jul 3 0:44: 5 2000 Delivered-To: freebsd-hardware@freebsd.org Received: from relay.flashnet.it (ems.flashnet.it [194.247.160.44]) by hub.freebsd.org (Postfix) with ESMTP id E2C7637B826 for ; Mon, 3 Jul 2000 00:43:52 -0700 (PDT) (envelope-from ml.ventu@flashnet.it) Received: from smtp.flashnet.it (ip035.pool-90.cyb.it [195.191.10.36]) by relay.flashnet.it (EMS-RELAY/8.10.0) with SMTP id e637hiA00907 for ; Mon, 3 Jul 2000 09:43:44 +0200 Message-Id: <200007030743.e637hiA00907@relay.flashnet.it> To: freebsd-hardware@FreeBSD.ORG X-Mailer: Post Road Mailer for OS/2 (Green Edition Ver 3.0) Date: Mon, 3 Jul 2000 09:43:40 EST From: Andrea Venturoli Reply-To: Andrea Venturoli Subject: Zip Zoom Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello. I've got a problem with a FreeBSD 4.0-RELEASE system. The machine is an IBM PS VP with a 486DX2, 20MB of RAM, ISA bus, an IDE HD, a 3Com EtherLink III, a modem and an Elsa QuickStep 1000pro ISDN card. Now I had a spare SCSI HD along with a Zip Zoom SCSI adapter (which is actually an Adaptec AVA-1502): ok, it can't boot, it will probably be very slow, but it's fine for what I have to do. I plugged in the adapter and connected the Disk (with another OS it works fine, so I don't think it's an hardware problem). I configured my kernel with the following lines: > device aic0 at isa? > device scbus > device da Then I rebooted, but I got the following: > Waiting 15 seconds for SCSI devices to settle > (probe0:aic0:0:0:0) ccb 0xc04dbc00 - timed out, phase 0xb6, state 4 > (probe0:aic0:0:0:0) ccb 0xc04dbc00 - timed out, phase 0xb6, state 4 > (probe0:aic0:0:0:0) ccb 0xc04dbc00 - timed out, phase 0xb6, state 1 > (probe0:aic0:0:0:0) ccb 0xc04dbc00 - timed out, phase 0xb6, state 1 > ... After the first line, the others appear very slowly (even one per minute); every device is probed a few times times up to device 7 (it's a narrow bus), sometimes the number after "ccb" changes. I tried every IRQ the card could handle (i.e. from 9 to 12), the kernel will always default to 12, so I "userconfig"ured it in the other cases; I also tried using the "alternate" jumper which moves the card from i/o ports 0x140 to 0x340, and here the kernel is smart enough to detect it. Anyway I could not get it to work. I double-checked and I should have no IRQ conflicts, since from 9 to 12 there is no legacy card, only the two plug and play ones, which get whichever ones are free. Any hint/suggestion? Bye & Thanks av. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message