Date: Sat, 11 Jan 1997 09:44:09 -0800 () From: Scott Burris <scott@cns.ucla.edu> To: Stefan Esser <se@freebsd.org> Cc: freebsd-hackers@freebsd.org Subject: Re: 2.2-BETA hangs after a few minutes <fwd> Message-ID: <SIMEON.9701110909.A@elm.cns.ucla.edu>
next in thread | raw e-mail | index | archive | help
On Fri, 10 Jan 1997 22:58:16 +0100 Stefan Esser <se@freebsd.org>
wrote:
> On Jan 5, scott@cns.ucla.edu (Scott Burris) wrote:
> >
> > To follow up my own message, I compiled the exact same kernel
> > configuration from 2.2-ALPHA and it works perfectly on this system.
> > So something bad has happened between ALPHA and BETA. Guess it's
> > time to start diff-ing the kernel source trees to see what's changed
> > :-(
>
> Please send verbose boot messages
> (enter "-v" at the Boot: prompt).
>
Here they are. FYI, I brought up another machine running 2.2 BETA (a
486 EISA box) with no problems. So it's just this specific hardware.
FreeBSD 2.2-BETA_A #0: Tue Dec 31 12:26:09 PST 1996
scott@elm.cns.ucla.edu:/usr/src/sys/compile/TEAK
Calibrating clock(s) relative to mc146818A clock ... i586 clock: 90042054 Hz, i8254 clock: 1193166 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_I586_CALIBRATION not specified - using old calibration method
CPU: Pentium (90.04-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x521 Stepping=1
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 50331648 (49152K bytes)
avail memory = 46395392 (45308K bytes)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: MDA/hercules <16 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 5 maddr 0xd8000 msize 16384 on isa
ed0: address 00:00:c0:b4:3a:50, type WD8013EPC (16 bit)
bpf: ed0 attached
ed1 not probed due to maddr conflict with ed0 at 0xd8000
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A : ESP
sio1 not found at 0x2f8
lpt0 at 0x3bc-0x3c3 irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
bpf: lp0 attached
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
fd1: 1.2MB 5.25in
wdc0 at 0x1f0-0x1f7 irq 14 flags 0x80ff80ff on isa
wdc0: unit 0 (wd0): < TEKRAM DC-6X0X IDE cacheing controller>, 32-bit
wd0: 2067MB (4233600 sectors), 4200 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): < TEKRAM DC-6X0X IDE cacheing controller>, 32-bit
wd1: 1551MB (3177216 sectors), 3152 cyls, 16 heads, 63 S/T, 512 B/S
bt0: Bt44xC/ 0-(32bit) bus
bt0: reading board settings, busmastering, int=15
bt0: version 4.21, sync, parity, 32 mbxs, 32 ccbs
bt0: targ 0 sync rate=10.00MB/s(100ns), offset=15
bt0: targ 1 sync rate=10.00MB/s(100ns), offset=15
bt0: targ 4 sync rate= 4.54MB/s(220ns), offset=08
bt0: targ 5 sync rate= 5.00MB/s(200ns), offset=15
bt0: Using Strict Round robin scheme
bt0 at 0x330 irq 15 on isa
(bt0:0:0): "QUANTUM XP34301 1051" type 0 fixed SCSI 2
sd0(bt0:0:0): Direct-Access 4106MB (8410200 512 byte sectors)
sd0(bt0:0:0): with 4076 cyls, 20 heads, and an average 103 sectors/track
(bt0:1:0): "QUANTUM XP34301 1051" type 0 fixed SCSI 2
sd1(bt0:1:0): Direct-Access 4106MB (8410200 512 byte sectors)
sd1(bt0:1:0): with 4076 cyls, 20 heads, and an average 103 sectors/track
(bt0:4:0): "LMS LD320 1.14" type 7 removable SCSI 2
od0(bt0:4:0): Optical od not present
od0(bt0:4:0): with approximate 0 cyls, 0 heads, and 0 sectors/track
(bt0:5:0): "PIONEER CD-ROM DRM-604X 2403" type 5 removable SCSI 2
cd0(bt0:5:0): CD-ROM can't get the size
(bt0:5:1): "PIONEER CD-ROM DRM-604X 2403" type 5 removable SCSI 2
cd1(bt0:5:1): CD-ROM can't get the size
(bt0:5:2): "PIONEER CD-ROM DRM-604X 2403" type 5 removable SCSI 2
cd2(bt0:5:2): CD-ROM can't get the size
(bt0:5:3): "PIONEER CD-ROM DRM-604X 2403" type 5 removable SCSI 2
cd3(bt0:5:3): CD-ROM can't get the size
(bt0:5:4): "PIONEER CD-ROM DRM-604X 2403" type 5 removable SCSI 2
cd4(bt0:5:4): CD-ROM can't get the size
(bt0:5:5): "PIONEER CD-ROM DRM-604X 2403" type 5 removable SCSI 2
cd5(bt0:5:5): CD-ROM can't get the size
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
npx0 on motherboard
npx0: INT 16 interface
imasks: bio c000c040, tty c0030092, net c0020020
BIOS Geometries:
0:03fe0f3f 0..1022=1023 cylinders, 0..15=16 heads, 1..63=63 sectors
1:03fe0f3f 0..1022=1023 cylinders, 0..15=16 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
Considering FFS root f/s.
configure() finished.
bpf: tun0 attached
bpf: lo0 attached
bpf: ds0 attached
ccd0-3: Concatenated disk drivers
wd0s1: type 0xa5, start 63, end = 4233599, size 4233537 : OK
wd1s1: type 0xa5, start 63, end = 3177215, size 3177153 : OK
sd0s1: type 0xa5, start 1, end = 8410199, size 8410199 : OK
sd1s1: type 0xa5, start 1, end = 8410199, size 8410199 : OK
sd0s1: type 0xa5, start 1, end = 8410199, size 8410199 : OK
sd1s1: type 0xa5, start 1, end = 8410199, size 8410199 : OK
Scott
----------------------
Scott Burris
UCLA Campus Telecommunications and Network Services
scott@cns.ucla.edu
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?SIMEON.9701110909.A>