From owner-freebsd-current@FreeBSD.ORG Fri Mar 18 10:21:31 2005 Return-Path: Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id F3B3116A4CE for ; Fri, 18 Mar 2005 10:21:30 +0000 (GMT) Received: from hetzner.co.za (lfw.hetzner.co.za [196.7.18.226]) by mx1.FreeBSD.org (Postfix) with ESMTP id C3FCB43D54 for ; Fri, 18 Mar 2005 10:21:28 +0000 (GMT) (envelope-from ianf@hetzner.co.za) Received: from localhost ([127.0.0.1]) by hetzner.co.za with esmtp (Exim 3.36 #1) id 1DCEbP-000746-00; Fri, 18 Mar 2005 12:21:11 +0200 To: "M. Warner Losh" From: Ian FREISLICH In-Reply-To: Message from "M. Warner Losh" <20050316.105706.39157062.imp@bsdimp.com> Date: Fri, 18 Mar 2005 12:21:11 +0200 Sender: ianf@hetzner.co.za Message-Id: cc: current@freebsd.org Subject: Re: device pcic and card X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 18 Mar 2005 10:21:31 -0000 "M. Warner Losh" wrote: > In message: > Ian FREISLICH writes: > : I cannot migrate to cbb and pccard: my Vadem 468 is not supported. > : I know the hardware is old. Are there any plans to support this > : or should I just give up and run 4.x on this laptop (it will be > : quite inconvenient to downgrade)? > > You can run 5.x on this machine. > > However, it is my belief that it is supported with the new cbb_isa > attachment. Hmm, I got the part number wrong, it's a vadem 469. How do I get cbb_isa to attach? This is the output of ident /boot/kernel/cbb.ko /boot/kernel/cbb.ko: $FreeBSD: src/sys/dev/pccbb/pccbb.c,v 1.121 2005/01/13 19:05:25 imp Exp $ $FreeBSD: src/sys/dev/pccbb/pccbb_isa.c,v 1.4 2005/01/11 05:33:18 imp Exp $ $FreeBSD: src/sys/dev/pccbb/pccbb_pci.c,v 1.7 2005/03/05 18:10:49 imp Exp $ Attached are two verbose boot logs. The first is my working kernel from 16 Nov 2004. The second is 17 Mar 2005 with: device cbb device pccard device cardbus This extra line appears in the new kernel's output. Is this perhaps what was detected as in the older kernel as pcic0? unknown: can't assign resources (memory) Is there anything else that I should be doing that I'm not? Ian -- Ian Freislich SMAP type=01 base=0000000000000000 len=00000000000a0000 SMAP type=01 base=0000000000100000 len=0000000001f00000 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #0: Tue Nov 16 12:52:12 SAST 2004 ianf@laptoy.freislich.nom.za:/usr/obj/usr/src/sys/LAPTOY Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc06d6000. Preloaded elf module "/boot/kernel.old/if_ed.ko" at 0xc06d610c. Preloaded elf module "/boot/kernel.old/miibus.ko" at 0xc06d61bc. Preloaded elf module "/boot/kernel.old/snd_ess.ko" at 0xc06d626c. Preloaded elf module "/boot/kernel.old/sound.ko" at 0xc06d631c. Preloaded elf module "/boot/kernel.old/snd_sbc.ko" at 0xc06d63cc. Preloaded elf module "/boot/kernel.old/random.ko" at 0xc06d647c. Preloaded elf module "/boot/kernel.old/io.ko" at 0xc06d652c. Preloaded elf module "/boot/kernel.old/mem.ko" at 0xc06d65d8. Calibrating clock(s) ... i8254 clock: 1193213 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 133637317 Hz CPU: Pentium/P54C (133.64-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping = 12 Features=0x1bf real memory = 33554432 (32 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000826000 - 0x0000000001f3ffff, 24223744 bytes (5914 pages) avail memory = 27717632 (26 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xbe4e pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: Intel Pentium detected, installing workaround for F00F bug null: random: io: mem: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00011066) pcibios: BIOS version 2.10 apm0: on motherboard apm0: found APM BIOS v1.1, connected at v1.1 pcib0: pcibus 0 on motherboard pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x1066, dev=0x0001, revid=0x04 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0xa400, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1066, dev=0x8002, revid=0x00 bus=0, slot=6, func=0 class=06-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base 30000000, size 21, enabled found-> vendor=0x10c8, dev=0x0001, revid=0x01 bus=0, slot=7, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 map[20]: type 4, range 32, base 0000fe00, size 4, enabled found-> vendor=0x1095, dev=0x0643, revid=0x00 bus=0, slot=8, func=0 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=14 isab0: at device 6.0 on pci0 isa0: on isab0 pci0: at device 7.0 (no driver attached) atapci0: port 0xfe00-0xfe0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 14 at device 8.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfe00 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] cpu0 on motherboard pnpbios: 16 devices, largest 468 bytes PNP0a03: adding io range 0xcf8-0xcf8, size=0x1, align=0x1 PNP0a03: adding io range 0xcfa-0xcfa, size=0x1, align=0x1 pnpbios: handle 0 device ID PNP0a03 (030ad041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0x100000-0x1ffffff, size=0x1f00000 PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000 PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 PNP0c01: adding io range 0x180-0x180, size=0x1, align=0x1 pnpbios: handle 1 device ID PNP0c01 (010cd041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x5f, size=0x20, align=0x1 pnpbios: handle 3 device ID PNP0100 (0001d041) PNP0200: adding io range 0x80-0x9f, size=0x20, align=0x1 PNP0200: adding io range 0-0x1f, size=0x20, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 4 device ID PNP0200 (0002d041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 pnpbios: handle 5 device ID PNP0303 (0303d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 6 device ID PNP0f13 (130fd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 7 device ID PNP0800 (0008d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x7f, size=0x10, align=0x1 pnpbios: handle 8 device ID PNP0b00 (000bd041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 pnpbios: handle 9 device ID PNP0c04 (040cd041) PNP0e00: adding io range 0x3e0-0x3e1, size=0x2, align=0x1 pnpbios: handle 10 device ID PNP0e00 (000ed041) ESS0106: adding fixed io range 0x230-0x23f, size=0x10, align=0x1 ESS0106: adding fixed io range 0x388-0x38b, size=0x4, align=0x1 ESS0106: adding fixed io range 0x330-0x331, size=0x2, align=0x1 ESS0106: adding irq mask 0x20 ESS0106: adding irq mask 0x200 ESS0106: adding dma mask 0x1 ESS0106: adding dma mask 0x8 pnpbios: handle 11 device ID ESS0106 (06017316) PNP0501: adding irq mask 0x10 PNP0501: adding fixed io range 0x3f8-0x3ff, size=0x8, align=0x1 pnpbios: handle 12 device ID PNP0501 (0105d041) PNP0510: adding irq mask 0x8 PNP0510: adding fixed io range 0x2f8-0x2ff, size=0x8, align=0x1 pnpbios: handle 13 device ID PNP0510 (1005d041) PNP0401: adding irq mask 0x80 PNP0401: adding fixed io range 0x378-0x37f, size=0x8, align=0x1 pnpbios: handle 14 device ID PNP0401 (0104d041) PNP0700: adding irq mask 0x40 PNP0700: adding fixed io range 0x3f2-0x3f5, size=0x4, align=0x1 PNP0700: adding fixed io range 0x3f7-0x3f7, size=0x1, align=0x1 PNP0700: adding dma mask 0x4 pnpbios: handle 15 device ID PNP0700 (0007d041) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcbfff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: at port 0x64,0x60 on isa0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0001 psm0: strange result for test aux port (1). kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 05 02 c8 psm: status 05 02 c8 psm: status 05 02 c8 psm: data 08 00 00 psm: status 10 00 64 psm: status 00 02 64 psm: status 00 02 64 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: ic_type 90 part_id 73 fdc0: at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: ic_type 90 part_id 73 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0: at port 0x3e0 iomem 0xd0000 on isa0 pcic0: Polling mode pccard0: on pcic0 pccard1: on pcic0 pcic1: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: can't assign resources (port) unknown: at port 0x60 on isa0 unknown: can't assign resources (irq) unknown: at irq 12 on isa0 speaker0: at port 0x61 on isa0 unknown: failed to probe at port 0x3e1-0x3e2 on isa0 sbc0: at port 0x330-0x331,0x388-0x38b,0x230-0x23f irq 9,5 drq 3,0 on isa0 sbc0: [GIANT-LOCKED] pcm0: on sbc0 pcm0: ESS5959 detected pcm0: [GIANT-LOCKED] pcm0: sndbuf_setmap ff4000, 1000; 0xc43d0000 -> ff4000 pcm0: sndbuf_setmap ff3000, 1000; 0xc43d1000 -> ff3000 unknown: can't assign resources (port) unknown: at port 0x3f8-0x3ff on isa0 unknown: can't assign resources (port) unknown: at port 0x2f8-0x2ff on isa0 unknown: can't assign resources (port) unknown: at port 0x378-0x37f on isa0 unknown: can't assign resources (port) unknown: at port 0x3f2-0x3f5 on isa0 Device configuration finished. TSC timecounter disabled: APM enabled. Timecounter "TSC" frequency 133637317 Hz quality -1000 Timecounters tick every 1.000 msec lo0: bpf attached ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin pcic0: Power: Vcc=0 Vpp=0 pcic0: Power applied Power complete. pcic0: Power: Vcc=-1 Vpp=-1 pcic0: Couldn't autodetect voltage, assuming 5.0V pcic0: Power applied pcic0: Output enabled pcic0: Settling complete Power complete. pccard: card inserted, slot 1 pcic0: reset 1 int is 0 stat is dd ad0: ATA-3 disk at ata0-master ad0: 3102MB (6354432 sectors), 6304 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, PIO4 GEOM: new disk ad0 pcic0: reset 2 int is 60 stat is dd Mounting root from ufs:/dev/ad0s1a SMAP type=01 base=0000000000000000 len=00000000000a0000 SMAP type=01 base=0000000000100000 len=0000000001f00000 Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #3: Thu Mar 17 10:53:36 SAST 2005 ianf@laptoy.freislich.nom.za:/usr/obj/usr/src/sys/LAPTOY Preloaded elf kernel "/boot/kernel/kernel" at 0xc06ed000. Preloaded elf module "/boot/kernel/if_ed.ko" at 0xc06ed108. Preloaded elf module "/boot/kernel/miibus.ko" at 0xc06ed1b4. Preloaded elf module "/boot/kernel/snd_ess.ko" at 0xc06ed260. Preloaded elf module "/boot/kernel/sound.ko" at 0xc06ed30c. Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc06ed3b8. Preloaded elf module "/boot/kernel/random.ko" at 0xc06ed464. Preloaded elf module "/boot/kernel/io.ko" at 0xc06ed510. Preloaded elf module "/boot/kernel/mem.ko" at 0xc06ed5b8. Calibrating clock(s) ... i8254 clock: 1193213 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 133637416 Hz CPU: Pentium/P54C (133.64-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping = 12 Features=0x1bf real memory = 33554432 (32 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000825000 - 0x0000000001f3ffff, 24227840 bytes (5915 pages) avail memory = 27713536 (26 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xbe4e pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: Intel Pentium detected, installing workaround for F00F bug null: random: io: mem: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface cpu0 on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00011066) pcibios: BIOS version 2.10 apm0: on motherboard apm0: found APM BIOS v1.1, connected at v1.1 pcib0: pcibus 0 on motherboard pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x1066, dev=0x0001, revid=0x04 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0xa400, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1066, dev=0x8002, revid=0x00 bus=0, slot=6, func=0 class=06-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base 30000000, size 21, enabled found-> vendor=0x10c8, dev=0x0001, revid=0x01 bus=0, slot=7, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 map[20]: type 4, range 32, base 0000fe00, size 4, enabled found-> vendor=0x1095, dev=0x0643, revid=0x00 bus=0, slot=8, func=0 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=14 isab0: at device 6.0 on pci0 isa0: on isab0 pci0: at device 7.0 (no driver attached) atapci0: port 0xfe00-0xfe0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 14 at device 8.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfe00 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete pnpbios: 16 devices, largest 468 bytes PNP0a03: adding io range 0xcf8-0xcf8, size=0x1, align=0x1 PNP0a03: adding io range 0xcfa-0xcfa, size=0x1, align=0x1 pnpbios: handle 0 device ID PNP0a03 (030ad041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0x100000-0x1ffffff, size=0x1f00000 PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000 PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 PNP0c01: adding io range 0x180-0x180, size=0x1, align=0x1 pnpbios: handle 1 device ID PNP0c01 (010cd041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x5f, size=0x20, align=0x1 pnpbios: handle 3 device ID PNP0100 (0001d041) PNP0200: adding io range 0x80-0x9f, size=0x20, align=0x1 PNP0200: adding io range 0-0x1f, size=0x20, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 4 device ID PNP0200 (0002d041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 pnpbios: handle 5 device ID PNP0303 (0303d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 6 device ID PNP0f13 (130fd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 7 device ID PNP0800 (0008d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x7f, size=0x10, align=0x1 pnpbios: handle 8 device ID PNP0b00 (000bd041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 pnpbios: handle 9 device ID PNP0c04 (040cd041) PNP0e00: adding io range 0x3e0-0x3e1, size=0x2, align=0x1 pnpbios: handle 10 device ID PNP0e00 (000ed041) ESS0106: adding fixed io range 0x230-0x23f, size=0x10, align=0x1 ESS0106: adding fixed io range 0x388-0x38b, size=0x4, align=0x1 ESS0106: adding fixed io range 0x330-0x331, size=0x2, align=0x1 ESS0106: adding irq mask 0x20 ESS0106: adding irq mask 0x200 ESS0106: adding dma mask 0x1 ESS0106: adding dma mask 0x8 pnpbios: handle 11 device ID ESS0106 (06017316) PNP0501: adding irq mask 0x10 PNP0501: adding fixed io range 0x3f8-0x3ff, size=0x8, align=0x1 pnpbios: handle 12 device ID PNP0501 (0105d041) PNP0510: adding irq mask 0x8 PNP0510: adding fixed io range 0x2f8-0x2ff, size=0x8, align=0x1 pnpbios: handle 13 device ID PNP0510 (1005d041) PNP0401: adding irq mask 0x80 PNP0401: adding fixed io range 0x378-0x37f, size=0x8, align=0x1 pnpbios: handle 14 device ID PNP0401 (0104d041) PNP0700: adding irq mask 0x40 PNP0700: adding fixed io range 0x3f2-0x3f5, size=0x4, align=0x1 PNP0700: adding fixed io range 0x3f7-0x3f7, size=0x1, align=0x1 PNP0700: adding dma mask 0x4 pnpbios: handle 15 device ID PNP0700 (0007d041) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xcbfff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: at port 0x64,0x60 on isa0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0001 psm0: strange result for test aux port (1). kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 05 02 c8 psm: status 05 02 c8 psm: status 05 02 c8 psm: data 08 00 00 psm: status 10 00 64 psm: status 00 02 64 psm: status 00 02 64 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: ic_type 90 part_id 73 fdc0: at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: ic_type 90 part_id 73 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: can't assign resources (memory) unknown: at iomem 0xf0000-0xfffff,0x100000-0x1ffffff,0-0x9ffff on isa0 unknown: can't assign resources (port) unknown: at port 0x60 on isa0 unknown: can't assign resources (irq) unknown: at irq 12 on isa0 speaker0: at port 0x61 on isa0 unknown: failed to probe at port 0x3e0-0x3e1 on isa0 sbc0: at port 0x330-0x331,0x388-0x38b,0x230-0x23f irq 9,5 drq 3,0 on isa0 sbc0: [GIANT-LOCKED] pcm0: on sbc0 pcm0: ESS5959 detected pcm0: [GIANT-LOCKED] pcm0: sndbuf_setmap ff4000, 1000; 0xc4682000 -> ff4000 pcm0: sndbuf_setmap ff3000, 1000; 0xc4683000 -> ff3000 unknown: can't assign resources (port) unknown: at port 0x3f8-0x3ff on isa0 unknown: can't assign resources (port) unknown: at port 0x2f8-0x2ff on isa0 unknown: can't assign resources (port) unknown: at port 0x378-0x37f on isa0 unknown: can't assign resources (port) unknown: at port 0x3f2-0x3f5 on isa0 Device configuration finished. TSC timecounter disabled: APM enabled. Timecounter "TSC" frequency 133637416 Hz quality -1000 Timecounters tick every 1.000 msec lo0: bpf attached ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ad0: ATA-3 disk at ata0-master ad0: 3102MB (6354432 sectors), 6304 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, PIO4 GEOM: new disk ad0 Trying to mount root from ufs:/dev/ad0s1a