Date: Mon, 27 Aug 2018 08:43:51 +0300 From: Daniel Braniss <danny@cs.huji.ac.il> To: "freebsd-arm@freebsd.org" <arm@freebsd.org> Subject: thermal DTS for allwinner/h3 Message-ID: <5E41E0AE-35B4-45AC-951E-705CAEADBFDA@cs.huji.ac.il> In-Reply-To: <23EA1292-4DF7-4C08-9EDA-C235CC461F1D@cs.huji.ac.il> References: <23EA1292-4DF7-4C08-9EDA-C235CC461F1D@cs.huji.ac.il>
next in thread | previous in thread | raw e-mail | index | archive | help
iI hate spell checkers
> On 27 Aug 2018, at 08:40, Daniel Braniss <danny@cs.huji.ac.il> wrote:
>=20
> hi,
> this overlay is working form me, though I think the actual temperature =
reported is a bit off (40-50C)
>=20
> /dts-v1/;
> /plugin/;
>=20
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/clock/sun8i-h3-ccu.h>
> #include <dt-bindings/reset/sun8i-h3-ccu.h>
>=20
> / {
> compatible =3D "allwinner,sun8i-h3";
> };
>=20
> &{/soc} {
> ths: thermal_sensor@1c25000 {
> compatible =3D "allwinner,sun8i-h3-ths";
> reg =3D <0x01c25000 0x100>;
> interrupts =3D <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> clocks =3D <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
> clock-names =3D "apb", "ths";
> resets =3D <&ccu RST_BUS_THS>;
> reset-names =3D "apb";
> status =3D "okay";
> nvmem-cells =3D <&ths_calib>;
> nvmem-cell-names =3D "ths-calib";
> };
> };
>=20
>=20
> _______________________________________________
> freebsd-arm@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5E41E0AE-35B4-45AC-951E-705CAEADBFDA>