Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 10 Jun 2005 01:03:55 GMT
From:      Brian Thomas <googl3meister@gmail.com>
To:        freebsd-gnats-submit@FreeBSD.org
Subject:   www/82089: 5.4 STABLE/AMD64 on ASUS A8V - fully functional
Message-ID:  <200506100103.j5A13tGh051317@www.freebsd.org>
Resent-Message-ID: <200506100110.j5A1A94H099182@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help

>Number:         82089
>Category:       www
>Synopsis:       5.4 STABLE/AMD64 on ASUS A8V - fully functional
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-www
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          update
>Submitter-Id:   current-users
>Arrival-Date:   Fri Jun 10 01:10:09 GMT 2005
>Closed-Date:
>Last-Modified:
>Originator:     Brian Thomas
>Release:        5.4-STABLE
>Organization:
>Environment:
FreeBSD d1scr33t 5.4-STABLE FreeBSD 5.4-STABLE #0: Tue May 24 09:22:57 EST 2005     gm@d1scr33t:/nsafe/builds/usr/src/sys/D1SCR33T  amd64
   
>Description:
Vendor: ASUS
Model: A8V deluxe
Chipset: VIA K8T800Pro + VT8237
Issues: Fully functional but not using (nor tried) sound

Everything I've tested is working very well, including SATA Promise RAID, USB. Have not used VIA RAID personally - it is disabled in BIOS and I use the Promise SATA controller only.

dmesg attached.
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #0: Tue May 24 09:22:57 EST 2005
    aj@d1scr33t:/nsafe/builds/usr/src/sys/D1SCR33T
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (1802.32-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x10ff0  Stepping = 0
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory  = 2147155968 (2047 MB)
avail memory = 2063826944 (1968 MB)
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fwohci0: <VIA Fire II (VT6306)> port 0xe800-0xe87f mem 0xfbf00000-0xfbf007ff irq 16 at device 7.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:c5:ff:ad
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <Promise PDC20378 SATA150 controller> port 0xd800-0xd87f,0xe000-0xe00f,0xe400-0xe43f mem 0xfbd00000-0xfbd1ffff,0xfbe00000-0xfbe00fff irq 18 at device 8.0 on pci0
atapci0: failed: rid 0x20 is memory, requested 4
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
ata4: channel #2 on atapci0
skc0: <Marvell Gigabit Ethernet> port 0xd400-0xd4ff mem 0xfbb00000-0xfbb03fff irq 17 at device 10.0 on pci0
skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3(0x7)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:11:d8:2f:0a:db
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pci0: <display, VGA> at device 11.0 (no driver attached)
atapci1: <VIA 6420 SATA150 controller> port 0xb400-0xb4ff,0xb800-0xb80f,0xc000-0xc003,0xc400-0xc407,0xc800-0xc803,0xd000-0xd007 irq 20 at device 15.0 on pci0
ata5: channel #0 on atapci1
ata6: channel #1 on atapci1
atapci2: <VIA 8237 UDMA133 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
ata0: channel #0 on atapci2
ata1: channel #1 on atapci2
uhci0: <VIA 83C572 USB controller> port 0xa000-0xa01f irq 21 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 21 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 21 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 21 at device 16.3 on pci0
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Microsoft Microsoft IntelliMouse\M-. Optical, rev 1.10/1.21, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
Timecounter "TSC" frequency 1802318112 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDRW <LITE-ON LTR-52327S/QS08> at ata0-master PIO4
ad2: 38145MB <WDC WD400BB-75JHC0/06.01C06> [77502/16/63] at ata1-master UDMA100
ad4: 152627MB <ST3160827AS/3.42> [310101/16/63] at ata2-master SATA150
ad6: 152627MB <ST3160827AS/3.42> [310101/16/63] at ata3-master SATA150
ar0: 152587MB <ATA RAID1 array> [19452/255/63] status: READY subdisks:
 disk0 READY on ad4 at ata2-master
 disk1 READY on ad6 at ata3-master
Mounting root from ufs:/dev/ar0s1a

>How-To-Repeat:
      
>Fix:
      
>Release-Note:
>Audit-Trail:
>Unformatted:



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200506100103.j5A13tGh051317>