From owner-freebsd-alpha Tue Dec 12 14:24:32 2000 From owner-freebsd-alpha@FreeBSD.ORG Tue Dec 12 14:24:27 2000 Return-Path: Delivered-To: freebsd-alpha@freebsd.org Received: from feral.com (feral.com [192.67.166.1]) by hub.freebsd.org (Postfix) with ESMTP id 68E7A37B400; Tue, 12 Dec 2000 14:24:26 -0800 (PST) Received: from zeppo.feral.com (IDENT:mjacob@zeppo [192.67.166.71]) by feral.com (8.9.3/8.9.3) with ESMTP id OAA17906; Tue, 12 Dec 2000 14:24:32 -0800 Date: Tue, 12 Dec 2000 14:24:25 -0800 (PST) From: Matthew Jacob Reply-To: mjacob@feral.com To: Mike Smith Cc: alpha@FreeBSD.ORG Subject: Re: -current not bootable on Rawhide (as4100) In-Reply-To: <200012122130.eBCLUu305172@mass.osd.bsdi.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-alpha@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > > On Mon, Dec 11, 2000 at 07:40:22PM -0800, Mike Smith wrote: > > > (The box seems to be missing /usr/share/misc/pci_vendors). > > > > It is at PRE_SMPNG. I'm not willing to issue the ``make installworld'' > > until a -current kernel boots on it. > > Understood. It should be fixed now. Not yet. Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. Setting atkbd 0 at to atkbdc (string) Setting atkbd 0 irq to 1 (int) Setting atkbdc 0 at to isa (string) Setting atkbdc 0 port to 96 (int) Setting fd 0 at to fdc0 (string) Setting fd 0 drive to 0 (int) Setting fdc 0 at to isa (string) Setting fdc 0 drq to 2 (int) Setting fdc 0 irq to 6 (int) Setting fdc 0 port to 1008 (int) Setting mcclock 0 at to isa (string) Setting mcclock 0 port to 112 (int) Setting ppc 0 at to isa (string) Setting ppc 0 irq to 7 (int) Setting psm 0 at to atkbdc (string) Setting psm 0 irq to 12 (int) Setting sc 0 at to isa (string) Setting sio 0 at to isa (string) Setting sio 0 irq to 4 (int) Setting sio 0 port to 1016 (int) Setting sio 1 at to isa (string) Setting sio 1 flags to 80 (int) Setting sio 1 irq to 3 (int) Setting sio 1 port to 760 (int) Setting vga 0 at to isa (string) FreeBSD 5.0-CURRENT #0: Tue Dec 12 13:56:36 PST 2000 mjacob@farrago.feral.com:/tstsys/compile/GPLUS AlphaServer 4100 AlphaServer 4100 5/533 4MB, 531MHz 8192 byte page size, 4 processors. CPU: EV56 (21164A) major=7 minor=2 extensions=0x1 OSF PAL rev: 0x4000100020117 real memory = 1608482816 (1570784K bytes) Physical memory chunk(s): 0x00722000 - 0x5ffeffff, 1603067904 bytes (195687 pages) avail memory = 1560805376 (1524224K bytes) Preloaded elf kernel "kernel" at 0xfffffc0000702000. Preloaded elf module "ispfw.ko" at 0xfffffc00007020c0. WARNING: size of kinfo_proc (904) should be 640!!! random: null: mem: Creating DISK md0 md0: Malloc disk mcbus0: pcib0: at mcbus0 gid 7 mid 5 pcib0: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2 pci0: physical bus=0 found-> vendor=0x1000, dev=0x0001, revid=0x02 bus=0, slot=1, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=4 map[10]: type 4, range 32, base 01fffc00, size 8, enabled map[14]: type 1, range 32, base 07fdde00, size 8, enabled found-> vendor=0x1011, dev=0x0009, revid=0x12 bus=0, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=8 map[10]: type 4, range 32, base 01fffd00, size 7, enabled map[14]: type 1, range 32, base 07fddf00, size 7, enabled found-> vendor=0x1077, dev=0x1020, revid=0x05 bus=0, slot=4, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=16 map[10]: type 4, range 32, base 01fffe00, size 8, enabled map[14]: type 1, range 32, base 07fde000, size 12, enabled found-> vendor=0x1077, dev=0x1020, revid=0x05 bus=0, slot=5, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=20 map[10]: type 4, range 32, base 01ffff00, size 8, enabled map[14]: type 1, range 32, base 07fdf000, size 12, enabled pci0: on pcib0 sym0: <810> port 0x1fffc00-0x1fffcff mem 0x7fdde00-0x7fddeff irq 4 at device 1.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: open drain IRQ line driver sym0: using NCR-generic firmware. sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00 sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00 sym0: Delay (GEN=11): 268 msec, 33165 KHz sym0: Delay (GEN=11): 283 msec, 31407 KHz sym0: Delay (GEN=11): 284 msec, 31296 KHz sym0: interrupting at IRQ 0x10 intA (vec 0xb40) de0: port 0x1fffd00-0x1fffd7f mem 0x7fddf00-0x7fddf7f irq 8 at device 2.0 on pci0 de0: interrupting at IRQ 0x0 intA (vec 0xb80) de0: DEC DE500-XA 21140 [10-100Mb/s] pass 1.2 de0: address 00:00:f8:01:8b:d7 de0: enabling Full Duplex 100baseTX port bpf: de0 attached Qlogic ISP Driver, FreeBSD Version 5.4, Core Version 2.0 isp0: port 0x1fffe00-0x1fffeff mem 0x7fde000-0x7fdefff irq 16 at device 4.0 on pci0 isp0: using Memory space register mapping isp0: interrupting at IRQ 0x8 intA (vec 0xc00) isp0: Ultra Mode Capable isp0: Board Revision 1040B, loaded F/W Revision 4.65.0 isp0: Last F/W revision was 5.57.1 isp0: 243 max I/O commands supported isp0: Initiator ID is 7 isp1: port 0x1ffff00-0x1ffffff mem 0x7fdf000-0x7fdffff irq 20 at device 5.0 on pci0 isp1: not configuring device_probe_and_attach: isp1 attach returned 19 pcib1: at mcbus0 gid 7 mid 4 pcib1: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2 Attaching Real Console sio1: gdb debugging port pci1: physical bus=0 found-> vendor=0x8086, dev=0x0482, revid=0x15 bus=0, slot=1, func=0 class=00-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x1077, dev=0x2100, revid=0x03 bus=0, slot=3, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=12 map[10]: type 4, range 32, base 01ffff00, size 8, enabled map[14]: type 1, range 32, base 07fef000, size 12, enabled pci1: on pcib1 eisab0: at device 1.0 on pci1 isp2: port 0x1ffff00-0x1ffffff mem 0x7fef000-0x7feffff irq 12 at device 3.0 on pci1 isp2: not configuring device_probe_and_attach: isp2 attach returned 19 panic: cpu_initclocks: no clock attached panic Stopped at Debugger+0x2c: ldq ra,0(sp) <0xfffffc0000707cc0> db> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message