Date: Sat, 13 May 2006 11:21:42 +0000 From: "Angka H. K." <harikurniawan@gmail.com> To: "Fabian Keil" <freebsd-listen@fabiankeil.de> Cc: current@freebsd.org Subject: Re: DMA no active on HL-DT-STCD-RW/DVD Message-ID: <4c40c4e70605130421m52463606wbfb23d5ace585fba@mail.gmail.com> In-Reply-To: <20060513130449.579fc921@localhost> References: <4c40c4e70605130152s52fb3188nd847a0b8b0d46972@mail.gmail.com> <20060513130449.579fc921@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
dmesg | grep acd0 acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4244N/1.02> at ata0-slave PIO4 Mind is 4244 though. It's looks like not much different. On 5/13/06, Fabian Keil <freebsd-listen@fabiankeil.de> wrote: > "Angka H. K." <harikurniawan@gmail.com> wrote: > > > My CD-RW/DVD drive cannot be set to dma. WinXP and Linux run it on > > DMA. There is no problem accessing any supported media. 5.4-RELEASE > > and 6.1-PRERELASE report the same thing. Currently I am using 7.0 > > No problems here with RELENG_6. I never had problems with 5.x either. > > fk@TP51 ~ $dmesg | grep acd0 > acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4241N/1.04> at ata1-master UDMA33 > > fk@TP51 ~ $grep dma /boot/loader.conf > hw.ata.atapi_dma=3D"1" > > fk@TP51 ~ $pciconf -lv | grep -A 4 ata > atapci0@pci0:31:1: class=3D0x01018a card=3D0x052d1014 chip=3D0x24ca8= 086 rev=3D0x01 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '82801DBM (ICH4-M) UltraATA/100 EIDE Controller' > class =3D mass storage > subclass =3D ATA > > Fabian > -- > http://www.fabiankeil.de/ > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4c40c4e70605130421m52463606wbfb23d5ace585fba>