Date: Thu, 05 Aug 1999 09:58:08 -0400 From: Bill Cerveny <cerveny@advanced.org> To: thierry.herbelot@alcatel.fr, Mike Spengler <mks@networkcs.com> Cc: atm@freebsd.org, harp@magic.net Subject: Re: Set prefix ? Message-ID: <4.2.0.58.19990805094410.00a733f0@mail.advanced.org> In-Reply-To: <37A94CEC.BC73692A@alcatel.fr> References: <199908041857.NAA45021@us.networkcs.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--=====================_2667719==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed Thierry, I think the fore_dnld command should look like: fore_dnld -r -d /etc/pca200e.bin I added "/pca200e.bin" above and to the appropriate line in the rc.atm file. At least, it doesn't hurt, because I got my configuration working. You might also want to check for a Compaq BIOS update. I had a DEC FDDI card once that "sort of" worked until I updated the BIOS on the Dell 200Mhz PC (I suspect a PCI bus error). Finally, the MD5 signature for the pca200e.bin file I used was: MD5 (/etc/pca200e.bin) = 2dc52f6d1c1180e596704cf9018e6eb6 Good luck! Bill Cerveny At 10:35 AM 8/5/99 +0200, Thierry Herbelot wrote: [stuff deleted] >I have got a full, complete hang of the machine after using a "fore_dnld >-r -d /etc" - the Compaq was completly blocked : no response to >keyboard, no response to ping on the Ethernet, no response on the On/Off >switch (it's an ATX board). I had to unplug the electricity plug to >restart the beast. > >I've also tried to add some debugging messages, but it didn't help. > >We have installed another for board in an old P5-75 from HP, and still >have problems downloading the microcode at startup. > > TfH > > > > -- > > Mike Spengler Network Computing Services, Inc. > > Email: mks@networkcs.com 1200 Washington Ave. So. > > Phone: +1 612 337 3557 Minneapolis MN 55415 > > FAX: +1 612 337 3400 (aka Minnesota Supercomputer > Center) --=====================_2667719==_.ALT Content-Type: text/html; charset="us-ascii" <html> Thierry,<br> <br> I think the fore_dnld command should look like:<br> <br> fore_dnld -r -d /etc/pca200e.bin<br> <br> I added "/pca200e.bin" above and to the appropriate line in the rc.atm file. At least, it doesn't hurt, because I got my configuration working.<br> <br> You might also want to check for a Compaq BIOS update. I had a DEC FDDI card once that "sort of" worked until I updated the BIOS on the Dell 200Mhz PC (I suspect a PCI bus error).<br> <br> Finally, the MD5 signature for the pca200e.bin file I used was:<br> <br> MD5 (/etc/pca200e.bin) = 2dc52f6d1c1180e596704cf9018e6eb6<br> <br> Good luck!<br> <br> Bill Cerveny<br> <br> At 10:35 AM 8/5/99 +0200, Thierry Herbelot wrote:<br> <br> [stuff deleted] <br> <br> <blockquote type=cite cite>I have got a full, complete hang of the machine after using a "fore_dnld<br> -r -d /etc" - the Compaq was completly blocked : no response to<br> keyboard, no response to ping on the Ethernet, no response on the On/Off<br> switch (it's an ATX board). I had to unplug the electricity plug to<br> restart the beast.<br> <br> I've also tried to add some debugging messages, but it didn't help.<br> <br> We have installed another for board in an old P5-75 from HP, and still<br> have problems downloading the microcode at startup.<br> <br> <x-tab> </x-tab>TfH<br> > <br> > --<br> > Mike Spengler Network Computing Services, Inc.<br> > Email: mks@networkcs.com 1200 Washington Ave. So.<br> > Phone: +1 612 337 3557 Minneapolis MN 55415<br> > FAX: +1 612 337 3400 (aka Minnesota Supercomputer Center)</blockquote></html> --=====================_2667719==_.ALT-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-atm" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.2.0.58.19990805094410.00a733f0>