Date: Mon, 16 Jul 2001 19:06:28 -0300 (ART)
From: Fernando Gleiser <fgleiser@cactus.fi.uba.ar>
To: matteotti <carloma@bluewin.ch>
Cc: <freebsd-questions@FreeBSD.ORG>
Subject: Re: No card in database for "(null)"("(null)")
Message-ID: <20010716190125.N85138-100000@cactus.fi.uba.ar>
In-Reply-To: <3B535650.992448CB@bluewin.ch>
next in thread | previous in thread | raw e-mail | index | archive | help
I have the same problem with my laptop. I have found the following workaround
to make the card work:
1. boot with the card inserted.
2. When the message "No card in database" appears, remove the card.
3. shutdown and power off.
4. insert the card
5. power on and boot.
FreeBSD should recognice the card now (at least in my laptop it does).
I dont know why this happens, or why the workaround works, but this solves
the problem.
Hope this helps.
Fer
On Mon, 16 Jul 2001, matteotti wrote:
> I posted this message already once unfortunately from a misconfigured
> machine. So no answers could get through. This time it should be
> possible to answer.
> I just repeat my previous message once more. Sorry !
>
> Hello,
> I have installed FreeBSD-4.3-RELEASE on an IBM ThinkPAD A22m. I run into
>
> problems with PCMCIA card configuration.
> Inserting a card results in the following message:
>
> 'No card in database for "(null)"("(null)")'
> I was playing around with the PCMCIA support entries in the kernel
> configuration file:
>
> eg.
>
> device pcic0 at isa ? irq 10 port 0x3e0 iomem 0xd8000
>
> and many more without success .
>
>
> My modem card (Billionton WorldTravellor) and ethernet card (Apollo)
> are both listed in /etc/defaults/pccard.conf and I copied the
> corresponding entries to /etc/pccard.conf.
>
> I configured the card already on an IBM ThinkPAD i1200 with sucess.
>
> I' d be very thankful for any suggestion .
>
> Best regards . C.
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010716190125.N85138-100000>