Date: Wed, 14 Jul 1999 12:38:54 -0400 From: "David E. Cross" <crossd@cs.rpi.edu> To: freebsd-hackers@freebsd.org Subject: brooktree 848 OEM card/no sound :( Message-ID: <199907141639.MAA24302@cs.rpi.edu>
next in thread | raw e-mail | index | archive | help
I am helping a freind install FreeBSD on his machine
(it is running 4.0-CURRENT now). everything works flawlessly, except his
OEM BrookTree 848 based soundcard. The card itself is transplanted from
his gateway machine (where it also had the same problems). Here are some
specifics:
(summary)
Machine is a Dual-PII-400 with a SB-AWE64 PCI soundcard. The Bt848 is
unrecognized, and I need to sysctl -w hw.bt848.tuner=[49] to get it to
work (either one works as far as I can tell with no difference).
(dmesg)
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Tue Jul 13 20:33:07 EDT 1999
root@neshej-2.stu.rpi.edu:/usr/src/sys/compile/MABROOK
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268435456 (262144K bytes)
avail memory = 258150400 (252100K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc02fa000.
Pentium Pro MTRR support enabled, default memory type is uncacheable
Probing for PnP devices:
CSN 1 Vendor ID: CTL00e4 [0xe4008c0e] Serial 0x01c574c8 Comp ID: PNPb02f [0x2fb0d041]
pcm1 (SB16pnp <SB16 PnP> sn 0x01c574c8) at 0x220-0x22f irq 5 drq 1 flags 0x15 on isa
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS version 1.2
pcib0: <PCI host bus adapter> on motherboard
pci0: <PCI bus> on pcib0
WARNING: "bktr" is usurping "bktr"'s cdevsw[]
chip0: <Intel 82443BX (440 BX) host to PCI bridge> at device 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga-pci0: <NVidia Riva TNT graphics accelerator> irq 17 at device 0.0 on pci1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> at device 7.1 on pci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device 7.2 on pci0
uhci0: could not map ports
device_probe_and_attach: uhci0 attach returned 6
chip1: <Intel 82371AB Power management controller> at device 7.3 on pci0
vx0: <3COM 3C590 Etherlink III PCI> irq 17 at device 16.0 on pci0
utp/aui/bnc[*utp*]: disable 'auto select' with DOS util! address 00:20:af:ee:32:94
Warning! Defective early revision adapter!
isa0: <ISA bus> on motherboard
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> at fdc0 drive 0
wdc0 at port 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa0
wdc0: unit 0 (wd0): <IBM-DTTA-371440>, DMA, 32-bit, multi-block-16
wd0: 13783MB (28229040 sectors), 28005 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at port 0x170-0x177 irq 15 flags 0xa0ffa0ff on isa0
wdc1: unit 0 (atapi): <CD-532E-B/1.0A>, removable, accel, ovlap, dma, iordis
wcd0: drive speed 5512KB/sec, 128KB cache
wcd0: supported read types: CD-R, CD-RW, CD-DA, packet track
wcd0: Audio: play, 256 volume levels
wcd0: Mechanism: ejectable tray
wcd0: Medium: CD-ROM 120mm audio disc loaded, unlocked
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
vx0 XXX: driver didn't set ifq_maxlen
changing root device to wd0s1a
SMP: AP CPU #1 Launched!
acd0: read_toc failed
(kernel config)
machine i386
cpu I686_CPU
ident MABROOK
maxusers 64
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options SOFTUPDATES
options KTRACE #ktrace(1) syscall trace support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
controller isa0
controller pnp0 # PnP support for ISA
controller pci0
controller fdc0 at isa? port IO_FD1 irq 6 drq 2
disk fd0 at fdc0 drive 0
controller wdc0 at isa? port IO_WD1 irq 14 flags 0xa0ffa0ff
disk wd0 at wdc0 drive 0
controller wdc1 at isa? port IO_WD2 irq 15 flags 0xa0ffa0ff
device wcd0 #IDE CD-ROM
controller atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa? port ? conflicts
device sc0 at isa?
device npx0 at nexus? port IO_NPX irq 13
device apm0 at nexus? flags 0x31 # Advanced Power Management
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device ppc0 at isa? port? flags 0x40 irq 7
controller ppbus0 # Parallel port bus (required)
device lpt0 # Printer
device plip0 # TCP/IP over parallel
device ppi0 # Parallel port interface device
device vx0 # 3Com 3c590, 3c595 (``Vortex'')
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device pty 256 # Pseudo-ttys (telnet etc)
pseudo-device gzip # Exec gzipped a.out's
pseudo-device bpfilter 4 #Berkeley packet filter
controller uhci0 # UHCI PCI->USB interface
controller ohci0 # OHCI PCI->USB interface
controller usb0 # USB Bus (required)
device ugen0 # Generic
device uhid0 # "Human Interface Devices"
device ukbd0 # Keyboard
device ulpt0 # Printer
device bktr0
controller iicbus0
controller iicbb0
controller smbus0
device ums0 # Mouse
device pcm0 at isa? port? irq 5 drq 1 flags 0x15
--
David Cross | email: crossd@cs.rpi.edu
Systems Administrator/Research Programmer | Web: http://www.cs.rpi.edu/~crossd
Rensselaer Polytechnic Institute, | Ph: 518.276.2860
Department of Computer Science | Fax: 518.276.4033
I speak only for myself. | WinNT:Linux::Linux:FreeBSD
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199907141639.MAA24302>