Date: Sat, 26 Jul 2014 10:46:46 +0200 From: Daniele Mazzotti <kappei84@gmail.com> To: Kevin Oberman <rkoberman@gmail.com> Cc: "freebsd-acpi@freebsd.org" <freebsd-acpi@freebsd.org> Subject: Re: ACPI support - Freebsd 10 on Sony Vaio VPCCA3C5E Message-ID: <CAC=ypSWnk2ju9HKpk_6=Tuymmi_HyLp1RxBC4ZPf7anxTwN3DA@mail.gmail.com> In-Reply-To: <CAN6yY1s_YY4E5ZFUgS6eHhPgfP2HESYZaE_zwbXTXKignfQfcA@mail.gmail.com> References: <20140722033156.E8638@sola.nimnet.asn.au> <1405965655.15937.YahooMailAndroidMobile@web181606.mail.ne1.yahoo.com> <CAC=ypSV1w0V0Vg2N0fZQK-VOh5Pzm3t7Cnch9xT=HYMjxcvqtw@mail.gmail.com> <20140721213352.GA64025@hell> <CAC=ypSVkOJQuWdGW10Duz2TWFv4L5deZ7uHwjFKPpUtWC_72ig@mail.gmail.com> <20140722180506.GA67094@hell> <CAC=ypSV8uVZ4w4SGXLexifnGvm874rTbs8iueaprp5J_XnFN4w@mail.gmail.com> <20140725221954.GA42012@hell> <CAN6yY1s_YY4E5ZFUgS6eHhPgfP2HESYZaE_zwbXTXKignfQfcA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, thanks again for your precious help. The suspend mode is not working yet as VESA option is still in my kernel configuration. I wanted to wait before removing it as I was not sure that intel video driver would have worked. My intention was to have a working setup with intel and being able to switch amongst vt(s) before getting rid of vesa, as I would peferer having the possibility to switch amongst vt(s) than putting my laptop to suspend. By the way I have a 10-RELEASE therefore I suspect I will have to recompile the kernel with VT. Did I get you right? I googled a bit and it seems that the only thing I have to do is to add these devices to my kernel: device vt device vt_vga This is the source I am referring to: https://wiki.freebsd.org/Newcons. Is this it? Cheers and thanks again, Daniele. 2014-07-26 8:14 GMT+02:00 Kevin Oberman <rkoberman@gmail.com>: > On Fri, Jul 25, 2014 at 3:19 PM, Bykov Vladislav <> <envolyse@gmail.com> > wrote: > >> On Fri, Jul 25, 2014 at 10:43:11PM +0200, Daniele Mazzotti wrote: >> > The error I get anytime I try to switch between terminals is the >> following >> > one " drmDropMaster failed: Unknown error: -22" >> This is okay, if you can't switch back to tty after starting Xorg in KMS >> mode using old syscons driver. There is already work going on with new >> driver, vt. I didn't test it though. >> >> At least, suspend is works now? >> > > Try adding kern.vty=vt to /boot/loader.conf. In recent 9-stable, > 10-stable, and head kernels, this is all it takes to switch to vt(4). If > you have an older kernel or are running any release, you will need to > rebuild the kernel using the VT configuration. The loader option may have > made 9.3, but I'm not sure. I don't believe vt(4) is available for 8. > -- > R. Kevin Oberman, Network Engineer, Retired > E-mail: rkoberman@gmail.com > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAC=ypSWnk2ju9HKpk_6=Tuymmi_HyLp1RxBC4ZPf7anxTwN3DA>