Date: Fri, 24 Aug 2001 15:03:56 -1000 From: "Neilson, Art" <aneilson@boh.com> To: <freebsd-stable@freebsd.org> Subject: FreeBSD 4.3 HP LH3r lockup Message-ID: <022175C9A38611418CCBDF860A467ABB09C728@EXCHANGE.bankoh.net>
next in thread | raw e-mail | index | archive | help
I'm building up a FreeBSD 4.3 based server and am encountering a reproducible lockup. The freeBSD source is from 07/20/2001 RELENG_4 cvsup and runs fine on other systems however locks up hard under heavy i/o on thi machine. The platform is a HP Netserver LH3r box with dual Pentium II's 450 MHz and onboard HP NetRAID adapter BIOS vers B.02.03 Nov 2, 2000. There are 3 9.10GB drives B 80-1205 and 1 9.10GB A 80-F309 drives in the system configured for RAID5. FreeBSD installed just fine onto the system from the 4.3 REL CD, was able to buildworld, buildkernel, installkernel installworld just fine using 07/20/2001 4.3 source, mergemaster OK kernel SMP enabled, using softupdates on the 4 filesystems. When I attempt to untar a 720MB ports tree tarball from /var/tmp onto /usr/ports the extract gets midway thru then the tar xvf filename listing scrolling on the screen freezes and the system locks hard. The point where it freezes during the extract varies, it's not the same spot in the tarball and I tried tarballs I had of older and newer ports trees as well so it's not the tarfile. When the system locks there is no way to recover except hard reset via hardware reset button or power switch. the console is frozen and all keyboard input including CTRL-ALT-DEL is ignored. I fear the problem may be some incompatibility between the onboard Netraid controller and the amr driver. Here is the dmesg output from the machine, any troubleshooting procedures anyone can recommend would be most appreciated. =20 Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-STABLE #0: Fri Aug 24 11:02:04 HST 2001 art@squid-cpf.dhcp.pc-bisnet.com:/usr/obj/usr/src/sys/SQUID-CPF Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (449.23-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x652 Stepping =3D 2 =20 Features=3D0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= , MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory =3D 536870912 (524288K bytes) avail memory =3D 520212480 (508020K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc034f000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard pci0: <PCI bus> on pcib0 isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 4.2 Timecounter "PIIX" frequency 3579545 Hz chip1: <Intel 82371AB Power management controller> port 0x2180-0x218f at device 4.3 on pci0 pcib1: <PCI to PCI bridge (vendor=3D8086 device=3D0960)> at device 7.0 = on pci0 pci1: <PCI bus> on pcib1 amr0: <AMI MegaRAID> mem 0xf0000000-0xf7ffffff irq 9 at device 7.1 on pci0 amr0: <Integrated HP NetRAID (T5)> Firmware \^C\^CD , BIOS \^C\^BB , 16MB RAM pcib2: <DEC 21152 PCI-PCI bridge> at device 8.0 on pci0 pci2: <PCI bus> on pcib2 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdce0-0xdcff mem 0xfe900000-0xfe9fffff,0xefffe000-0xefffefff irq 10 at device 2.0 on pci2 fxp0: Ethernet address 00:90:27:9a:2a:bc inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <unknown card> (vendor=3D0x103c, dev=3D0x10c1) at 11.0 pci0: <Cirrus Logic GD5446 SVGA controller> at 13.0 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2 APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0 IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 20 packets/entry by default SMP: AP CPU #1 Launched! ata0-slave: ata_command: timeout waiting for intr ata0-slave: identify failed acd0: CDROM <CD-532E-B> at ata0-master using PIO4 amrd0: <MegaRAID logical drive> on amr0 amrd0: 26031MB (53311488 sectors) RAID 5 (optimal) Mounting root from ufs:/dev/amrd0s1a To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?022175C9A38611418CCBDF860A467ABB09C728>