Date: Mon, 8 Jul 2002 12:15:59 -0700 From: "Jim McLoughlin" <jimmcloughlin@earthlink.net> To: "Freebsdq" <freebsd-questions@freebsd.org> Subject: more newbie install - X config failing.... Message-ID: <NCBBJEJOIHMJAPHOEEFPMECPELAA.jimmcloughlin@earthlink.net>
next in thread | raw e-mail | index | archive | help
Hi again Please bear with my newbiesque meanderings while I'm getting up to speed with free bsd, probably lots more to come... Have tried to configure X unsuccessfully (in FBSD 4.6, Xfree86 4.2), according to the handbook X config instructions. I set the monitor appropriately according to instructions, and have re-tried it with lower resolution and color depth. The result is always the same - I see the screen / mouse, but it is unstable (flickers, disappears briefly). I looked at my chip and found it on ATI's site as being a Rage XC circa 1999). The /var/log/XFree86.0.log seems to recognize it as being an ati mach64 chip, with some mention of AGP. I inherited my current SWT box, and am not sure about motherboard details, whether the video card is definitely in an AGP slot (though the press release below would seem to imply it is), or whether I need to perform the extra Intel i810 chipset config in the advanced config handbook section (5.4.3). The log indicates that the "atimisc" driver is being used. My next guess is to try the enable agppart and see if that helps, but I wanted to check here first in case this is not the way to go (and to open my computer back up to see if I can get any more info). Can anyone with experience using this card suggest my next steps here? Card: http://www.ati.com/support/products/pc/ragexc/ragexc.html Press Release (mine is the XC) http://www.ati.com/companyinfo/press/1999/4162.html thanks JM To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?NCBBJEJOIHMJAPHOEEFPMECPELAA.jimmcloughlin>