Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 25 Feb 2015 16:22:06 +0100
From:      "Nagy, Attila" <bra@fsn.hu>
To:        John Baldwin <jhb@freebsd.org>, freebsd-stable@freebsd.org
Cc:        Rainer Duffner <rainer@ultra-secure.de>
Subject:   Re: FreeBSD 10.1-amd64 -> booting on a HP DL380 Gen9 results in panic
Message-ID:  <54EDE89E.1070003@fsn.hu>
In-Reply-To: <201412220957.16974.jhb@freebsd.org>
References:  <D6F4B783-67B8-4447-8618-E5C472178246@ultra-secure.de> <201412220957.16974.jhb@freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi,

On 12/22/14 15:57, John Baldwin wrote:
> On Thursday, December 18, 2014 7:27:13 pm Rainer Duffner wrote:
>> Hi,
>>
>> we got one to test and it booted using the UEFI memory stick image.
>>
>> However, I get a panic after
>> Event time „LAPIC“ quality 600
>> ACPI APIC Table: <HP     Proliant>
>> panic: APIC: CPU with APIC ID 0 is not enabled
>> cpuid = 0
>>
>> and then a stack backtrace
>>
>>
>> What does that mean?
>>
>> AFAIK, I have a single E5-2620V3 CPU and 16 GB RAM in there.
>>
>>
>
> Eh, the table that ACPI provides that lists the available CPUs in the system
> claims that that the CPU that the kernel booted from is disabled.  We assume
> that the boot processor is valid and enabled (since it is running the kernel
> already!)  This is almost certainly a firmware bug.  Booting without UEFI
> would be a good test as Mark suggested.  If you can capture a verbose dmesg,
> that would also include enough details about what we found in the ACPI table
> to debug this further perhaps.
>
One of my colleagues have captured a boot -v output for this machine.
One line (where it prints the CPU) is missing, the others are intact:
https://plus.google.com/photos/104147045962330059540/albums/6119801748474522833/6119801755965284786?banner=pwa&pid=6119801755965284786&oid=104147045962330059540

The machine is PXE-booted. I can try anything to help fixing this issue.
UEFI and AFAIK the x2APIC support, which Rainer mentioned is disabled here.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?54EDE89E.1070003>