Date: Sun, 14 Apr 1996 21:03:43 +0200 From: se@zpr.uni-koeln.de (Stefan Esser) To: Bob Willcox <bob@luke.pmr.com> Cc: hackers@FreeBSD.ORG Subject: Re: Triton-II chipset support? Message-ID: <199604141903.AA09024@FileServ1.MI.Uni-Koeln.DE> In-Reply-To: Bob Willcox <bob@luke.pmr.com> "Re: Triton-II chipset support?" (Apr 14, 13:54)
next in thread | previous in thread | raw e-mail | index | archive | help
On Apr 14, 13:54, Bob Willcox wrote: } > Is the Triton II finally out ? } } Yes, I picked up a motherboard last Friday. Interesting! That's the first Pentium motherboard I could take serious after quite some time ... (Didn't like the Triton because of it's lack of parity, but ECC is a lot nicer :-) } I have installed the MB in my -current system and it seems to be } running fine. I do get different some boot messages: } } New MB: } chip0 <generic PCI bridge (vendor=8086 device=1250 subclass=0)> rev 1 on pci0:0 } chip1 <generic PCI bridge (vendor=8086 device=7000 subclass=1)> rev 0 on pci0:7 } pci0:7: Intel Corporation, device=0x7010, class=storage (ide) [no driver assigned] } } vs. } } Old MB: } chip0 <Intel 82437 (Triton) PCI cache memory controller> rev 2 on pci0:0 } chip1 <Intel 82371 (Triton) PCI-ISA bridge> rev 2 on pci0:7 } pci0:7: Intel Corporation, device=0x1230, class=storage (ide) [no driver assigned] I'll have to look up the correct chip set designations on the Intel web server. Seems the IDE controller is part of the ISA (or EISA ?) bus bridge again ... } None so far. My plans, however, are to eventually install this MB } in my fileserver system which is running 2.1-stable. Hopefully it } will work ok there as well. Guess it will. FreeBSD ignores it except in the PCI bus probe phase. If some devices are not correctly detected, then I'll have to look into this ... Regards, STefan -- Stefan Esser, Zentrum fuer Paralleles Rechnen Tel: +49 221 4706021 Universitaet zu Koeln, Weyertal 80, 50931 Koeln FAX: +49 221 4705160 ============================================================================== http://www.zpr.uni-koeln.de/~se <se@ZPR.Uni-Koeln.DE>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199604141903.AA09024>