Date: Sat, 1 Feb 2020 22:04:04 -0800 From: Mark Millard <marklmi@yahoo.com> To: "jeff@freebsd.org" <jeff@FreeBSD.org>, Kyle Evans <kevans@FreeBSD.org> Cc: freebsd-arm <freebsd-arm@freebsd.org>, =?utf-8?Q?Klaus_K=C3=BCchemann?= <maciphone2@googlemail.com>, Andreas Tobler <andreast-list@fgznet.ch> Subject: Re: head -r357356: fails to boot RPi4 but boots Rock64 (same media, moved between machines); -r356426 booted both Message-ID: <EFE1B845-FD79-4EF7-A980-E14321273EE0@yahoo.com> In-Reply-To: <78694513-66DE-4616-91C0-896D99C97B33@yahoo.com> References: <63205335-8E8A-4CCB-BC80-E4EC767FBC09.ref@yahoo.com> <63205335-8E8A-4CCB-BC80-E4EC767FBC09@yahoo.com> <e083e017-af5a-e219-3a3c-bc82b16c6027@fgznet.ch> <62250B30-E1F6-470D-BB84-F9565D063A06@yahoo.com> <78694513-66DE-4616-91C0-896D99C97B33@yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[I'm trying a artifcat.ci.freebsd.org -r356392 kernel and its debug information. I end up reporting the boot -v output.] On 2020-Feb-1, at 20:28, Mark Millard <marklmi at yahoo.com> wrote: > [head -r357392 made no difference in the failure sequence > for booting the RPi4B.] >=20 > On 2020-Feb-1, at 16:11, Mark Millard <marklmi at yahoo.com> wrote: >=20 >=20 >=20 >> On 2020-Feb-1, at 14:25, Andreas Tobler <andreast-list at fgznet.ch> = wrote: >>=20 >>> On 01.02.20 12:58, Mark Millard via freebsd-arm wrote: >>>> I had a working head -r356426 based microSD card that booted >>>> both the Rock64 and the RPi4. >>>> I upgraded it to be based on head -r357356 . >>>> Now the RPi4B hangs up during boot and does not start its APs. >>>> But the Rock64 boots fine via the same media. >>>> Diffing RPi4B console logs for -r356426 vs. -r357356 shows >>>> -r357356 shw the following as the only types of >>>> textual differences: >>>> psci0: PSCI version number mismatched with DT >>>> device_attach: psci0 attach returned 6 >>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >>>> psci0: PSCI version number mismatched with DT >>>> device_attach: psci0 attach returned 6 >>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >>>> psci0: PSCI version number mismatched with DT >>>> device_attach: psci0 attach returned 6 >>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >>>> psci0: PSCI version number mismatched with DT >>>> device_attach: psci0 attach returned 6 >>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >>>> psci0: PSCI version number mismatched with DT >>>> device_attach: psci0 attach returned 6 >>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >>>> psci0: PSCI version number mismatched with DT >>>> device_attach: psci0 attach returned 6 >>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >>>> psci0: PSCI version number mismatched with DT >>>> device_attach: psci0 attach returned 6 >>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >>>> psci0: PSCI version number mismatched with DT >>>> (More blocks of 3 such lines at a time happen later as well.) >>>=20 >>> I see the same on a rpi3b+. Try r356775, r356776 is the breaking = commit for me. >=20 > I still get the above sort of thing from -r357392 > (non-debug kernel, as I usually run). >=20 > I also still get "APs not started" and the like. >=20 > The fix seems to have made no difference for this issue. > If -r356775 really works, then there is more to the > -r356776 story. >=20 >> Looks like head -r357392 is an intended fix >> to head -r356776 : >>=20 >> Author: jeff >> Date: Sat Feb 1 23:46:30 2020 >> New Revision: 357392 >> URL:=20 >> https://svnweb.freebsd.org/changeset/base/357392 >>=20 >>=20 >> Log: >> Fix a bug in r356776 where the page allocator was not properly = restored to >> the percpu page allocator after it had been temporarily overridden by >> startup_alloc. >>=20 >> Reported by: pho, bdragon >>=20 >> Modified: >> head/sys/vm/uma_core.c >>=20 >> Modified: head/sys/vm/uma_core.c >> = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D >> --- head/sys/vm/uma_core.c Sat Feb 1 23:16:30 2020 = (r357391) >> +++ head/sys/vm/uma_core.c Sat Feb 1 23:46:30 2020 = (r357392) >> @@ -2101,7 +2101,9 @@ zone_kva_available(uma_zone_t zone, void = *unused) >> if ((zone->uz_flags & UMA_ZFLAG_CACHE) !=3D 0) >> return; >> KEG_GET(zone, keg); >> - if (keg->uk_allocf =3D=3D startup_alloc) >> + if (keg->uk_flags & UMA_ZONE_PCPU) >> + keg->uk_allocf =3D pcpu_page_alloc; >> + else if (keg->uk_allocf =3D=3D startup_alloc) >> keg->uk_allocf =3D page_alloc; >> } >>=20 >>=20 >> I'll probably try it later today sometime. >>=20 >=20 > I tried -r357392 for the RPi4B boot issue, but it > was not a solution. >=20 > The fix may well be a solution to some other > issue(s). >=20 Of itself, the debug kernel did not report catching any witness or other such problems. It does report on occasion: mmc0: CMD7 failed, RESULT: 1 mmc0: Card at relative address 43690 failed to select So here is a boot -v output from the artifact.ci.freebsd.org debug kernel. It has a lot more detail in it but I do not know if it will prove useful. ---<<BOOT>>--- KDB: debugger backends: ddb KDB: current backend: ddb Type Physical Virtual #Pages Attr Reserved 000000000000 0 00000001 WB=20 ConventionalMemory 000000001000 1000 00007ef1 WB=20 BootServicesData 000007ef2000 7ef2000 0000001c WB=20 ConventionalMemory 000007f0e000 7f0e000 00029f93 WB=20 BootServicesData 000031ea1000 31ea1000 00000001 WB=20 LoaderData 000031ea2000 31ea2000 00008001 WB=20 LoaderCode 000039ea3000 39ea3000 000000a6 WB=20 Reserved 000039f49000 39f49000 00000007 WB=20 BootServicesData 000039f50000 39f50000 00000001 WB=20 Reserved 000039f51000 39f51000 00000002 WB=20 RuntimeServicesData 000039f53000 39f53000 00000001 WB RUNTIME Reserved 000039f54000 39f54000 00000001 WB=20 BootServicesData 000039f55000 39f55000 00000002 WB=20 RuntimeServicesData 000039f57000 39f57000 00000001 WB RUNTIME LoaderData 000039f58000 39f58000 00001408 WB=20 RuntimeServicesCode 00003b360000 3b360000 00000010 WB RUNTIME LoaderData 00003b370000 3b370000 00000090 WB=20 BootServicesData 000040000000 40000000 000bc000 WB=20 MemoryMappedIO 0000fe100000 fe100000 00000001 RUNTIME Physical memory chunk(s): 0x00001000 - 0x39f48fff, 927 MB ( 237384 pages) 0x39f50000 - 0x39f50fff, 0 MB ( 1 pages) 0x39f53000 - 0x39f53fff, 0 MB ( 1 pages) 0x39f55000 - 0x3b35ffff, 20 MB ( 5131 pages) 0x3b370000 - 0x3b3fffff, 0 MB ( 144 pages) 0x40000000 - 0xfbffffff, 3008 MB ( 770048 pages) Excluded memory regions: 0x00000000 - 0x00000fff, 0 MB ( 1 pages) NoAlloc=20 0x32000000 - 0x3377dfff, 23 MB ( 6014 pages) NoAlloc=20 0x39f49000 - 0x39f4ffff, 0 MB ( 7 pages) NoAlloc=20 0x39f51000 - 0x39f54fff, 0 MB ( 4 pages) NoAlloc=20 0x39f57000 - 0x39f57fff, 0 MB ( 1 pages) NoAlloc=20 0x3b360000 - 0x3b36ffff, 0 MB ( 16 pages) NoAlloc=20 0x3e513000 - 0x3ebebfff, 6 MB ( 1753 pages) NoAlloc=20 0xfe100000 - 0xfe100fff, 0 MB ( 1 pages) NoAlloc=20 Found 4 CPUs in the device tree Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-CURRENT #0 r357392: Sun Feb 2 00:43:38 UTC 2020 = root@FreeBSD-head-aarch64-build.jail.ci.FreeBSD.org:/usr/obj/usr/src/arm64= .aarch64/sys/GENERIC arm64 FreeBSD clang version 9.0.1 (git@github.com:llvm/llvm-project.git = c1a0a213378a458fbea1a5c77b315c7dce08fd05) (based on LLVM 9.0.1) WARNING: WITNESS option enabled, expect reduced performance. VT(efifb): resolution 1824x984 Preloaded elf kernel "/boot/kernel/kernel" at 0xffff000001550000. Preloaded elf module "/boot/kernel/umodem.ko" at 0xffff000001559020. Preloaded elf module "/boot/kernel/ucom.ko" at 0xffff000001559838. Preloaded boot_entropy_cache "/boot/entropy" at 0xffff00000155a010. module firmware already present! Starting CPU 1 (1) Starting CPU 2 (2) Starting CPU 3 (3) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs random: read 4096 bytes from preloaded cache random: unblocking device. VIMAGE (virtualized network stack) enabled ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 snd_unit_init() u=3D0x00ff8000 [512] d=3D0x00007c00 [32] c=3D0x000003ff = [1024] feeder_register: snd_unit=3D-1 snd_maxautovchans=3D16 latency=3D2 = feeder_rate_min=3D1 feeder_rate_max=3D2016000 feeder_rate_round=3D25 random: entropy device external interface MAP 39f53000 mode 2 pages 1 MAP 39f57000 mode 2 pages 1 MAP 3b360000 mode 2 pages 16 MAP fe100000 mode 0 pages 1 nfslock: pseudo-device crypto: <crypto core> WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD = 13.0. kbd0 at kbdmux0 mem: <memory> null: <full device, null device, zero device> openfirm: <Open Firmware control device> WARNING: Device "openfirm" is Giant locked and may be deleted before = FreeBSD 13.0. ofwbus0: <Open Firmware Device Tree> simplebus0: <Flattened device tree simple bus> on ofwbus0 ofw_clkbus0: <OFW clocks bus> on ofwbus0 clk_fixed0: <Fixed clock> on ofw_clkbus0 clk_fixed1: <Fixed clock> on ofw_clkbus0 simplebus1: <Flattened device tree simple bus> on ofwbus0 simplebus2: <Flattened device tree simple bus> on ofwbus0 regfix0: <Fixed Regulator> on ofwbus0 regfix1: <Fixed Regulator> on ofwbus0 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 psci0: PSCI version number mismatched with DT device_attach: psci0 attach returned 6 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 psci0: PSCI version number mismatched with DT device_attach: psci0 attach returned 6 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 psci0: PSCI version number mismatched with DT device_attach: psci0 attach returned 6 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 psci0: PSCI version number mismatched with DT device_attach: psci0 attach returned 6 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 psci0: PSCI version number mismatched with DT device_attach: psci0 attach returned 6 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 psci0: PSCI version number mismatched with DT device_attach: psci0 attach returned 6 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 psci0: PSCI version number mismatched with DT device_attach: psci0 attach returned 6 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 psci0: PSCI version number mismatched with DT device_attach: psci0 attach returned 6 gic0: <ARM Generic Interrupt Controller> mem = 0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x400460= 00-0x40047fff irq 46 on simplebus0 gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 psci0: PSCI version number mismatched with DT device_attach: psci0 attach returned 6 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq = 22,23 on simplebus0 gpiobus0: <OFW GPIO bus> on gpio0 Processing 1 pin-config node(s) in pinctrl-0 for serial@7e201000 Processing 1 pin-config node(s) in pinctrl-0 for mmc@7e300000 gpio0: set pin 48 to func 7, pull 0 gpio0: set pin 49 to func 7, pull 2 gpio0: set pin 50 to func 7, pull 2 gpio0: set pin 51 to func 7, pull 2 gpio0: set pin 52 to func 7, pull 2 gpio0: set pin 53 to func 7, pull 2 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 psci0: PSCI version number mismatched with DT device_attach: psci0 attach returned 6 gpioregulator0: <GPIO controlled regulator> on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 psci0: PSCI version number mismatched with DT device_attach: psci0 attach returned 6 generic_timer0: <ARMv7 Generic Timer> irq 4,5,6,7 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000 gpioregulator0: <GPIO controlled regulator> on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 psci0: PSCI version number mismatched with DT device_attach: psci0 attach returned 6 gpioregulator0: <GPIO controlled regulator> on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 psci0: PSCI version number mismatched with DT device_attach: psci0 attach returned 6 gpioregulator0: <GPIO controlled regulator> on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 psci0: PSCI version number mismatched with DT device_attach: psci0 attach returned 6 gpioregulator0: <GPIO controlled regulator> on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 psci0: PSCI version number mismatched with DT device_attach: psci0 attach returned 6 usb_nop_xceiv0: <USB NOP PHY> on ofwbus0 gpioregulator0: <GPIO controlled regulator> on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 efirtc0: cannot read EFI realtime clock, error 78 ofwbus0: <framebuffer@3e513000> mem 0x3e513000-0x3ebebbff compat = simple-framebuffer (no driver attached) psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 psci0: PSCI version number mismatched with DT device_attach: psci0 attach returned 6 simplebus0: <txp@7e004000> mem 0x7e004000-0x7e00401f irq 8 disabled = compat brcm,bcm2835-txp (no driver attached) bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007aff irq = 9,10,11,12,13,14,15,16,17,18,19 on simplebus0 Checking root against raspberrypi,model-b Checking root against brcm,bcm2835 Checking root against brcm,bcm2709 Checking root against brcm,bcm2836 Checking root against brcm,bcm2837 Checking root against brcm,bcm2711 bcmwd0: <BCM2708/2835 Watchdog> mem = 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on = simplebus0 simplebus0: <cprman@7e101000> mem 0x7e101000-0x7e102fff compat = brcm,bcm2711-cprman (no driver attached) simplebus0: <rng@7e104000> mem 0x7e104000-0x7e10400f irq 20 compat = brcm,bcm2838-rng200 (no driver attached) mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 21 on = simplebus0 gpioc0: <GPIO controller> on gpio0 uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 24 on = simplebus0 uart0: console (115200,n,8,1) uart0: fast interrupt uart0: PPS capture mode: DCD simplebus0: <mmc@7e202000> mem 0x7e202000-0x7e2020ff irq 25 disabled = compat brcm,bcm2835-sdhost (no driver attached) simplebus0: <i2s@7e203000> mem 0x7e203000-0x7e203023 disabled compat = brcm,bcm2835-i2s (no driver attached) simplebus0: <spi@7e204000> mem 0x7e204000-0x7e2041ff irq 26 disabled = compat brcm,bcm2835-spi (no driver attached) simplebus0: <i2c@7e205000> mem 0x7e205000-0x7e2051ff irq 27 disabled = compat brcm,bcm2835-i2c (no driver attached) simplebus0: <pixelvalve@7e206000> mem 0x7e206000-0x7e2060ff irq 28 = disabled compat brcm,bcm2835-pixelvalve0 (no driver attached) simplebus0: <pixelvalve@7e207000> mem 0x7e207000-0x7e2070ff irq 29 = disabled compat brcm,bcm2835-pixelvalve1 (no driver attached) simplebus0: <dpi@7e208000> mem 0x7e208000-0x7e20808b disabled compat = brcm,bcm2835-dpi (no driver attached) simplebus0: <dsi@7e209000> mem 0x7e209000-0x7e209077 irq 30 compat = brcm,bcm2835-dsi0 (no driver attached) simplebus0: <aux@7e215000> mem 0x7e215000-0x7e215007 compat = brcm,bcm2835-aux (no driver attached) simplebus0: <serial@7e215040> mem 0x7e215040-0x7e21507f irq 31 disabled = compat brcm,bcm2835-aux-uart (no driver attached) simplebus0: <spi@7e215080> mem 0x7e215080-0x7e2150bf irq 32 disabled = compat brcm,bcm2835-aux-spi (no driver attached) simplebus0: <spi@7e2150c0> mem 0x7e2150c0-0x7e2150ff irq 33 disabled = compat brcm,bcm2835-aux-spi (no driver attached) simplebus0: <pwm@7e20c000> mem 0x7e20c000-0x7e20c027 disabled compat = brcm,bcm2835-pwm (no driver attached) simplebus0: <hvs@7e400000> mem 0x7e400000-0x7e405fff irq 34 disabled = compat brcm,bcm2835-hvs (no driver attached) simplebus0: <dsi@7e700000> mem 0x7e700000-0x7e70008b irq 35 disabled = compat brcm,bcm2835-dsi1 (no driver attached) simplebus0: <csi@7e800000> mem = 0x7e800000-0x7e8007ff,0x7e802000-0x7e802003 irq 36 disabled compat = brcm,bcm2835-unicam (no driver attached) simplebus0: <csi@7e801000> mem = 0x7e801000-0x7e8017ff,0x7e802004-0x7e802007 irq 37 disabled compat = brcm,bcm2835-unicam (no driver attached) simplebus0: <i2c@7e804000> mem 0x7e804000-0x7e804fff irq 38 disabled = compat brcm,bcm2835-i2c (no driver attached) simplebus0: <i2c@7e805000> mem 0x7e805000-0x7e805fff irq 39 disabled = compat brcm,bcm2835-i2c (no driver attached) simplebus0: <vec@7e806000> mem 0x7e806000-0x7e806fff irq 40 disabled = compat brcm,bcm2835-vec (no driver attached) simplebus0: <pixelvalve@7e807000> mem 0x7e807000-0x7e8070ff irq 41 = disabled compat brcm,bcm2835-pixelvalve2 (no driver attached) simplebus0: <hdmi@7e902000> mem = 0x7e902000-0x7e9025ff,0x7e808000-0x7e8080ff irq 42,43 disabled compat = brcm,bcm2835-hdmi (no driver attached) simplebus0: <usb@7e980000> mem = 0x7e980000-0x7e98ffff,0x7e00b200-0x7e00b3ff irq 44,45 disabled compat = brcm,bcm2708-usb (no driver attached) simplebus0: <gpu> disabled compat brcm,bcm2835-vc4 (no driver attached) simplebus0: <local_intc@40000000> mem 0x40000000-0x400000ff compat = brcm,bcm2836-l1-intc (no driver attached) simplebus0: <thermal@7d5d2200> mem 0x7d5d2200-0x7d5d222b irq 47 compat = brcm,avs-tmon-bcm2838 (no driver attached) simplebus0: <serial@7e201400> mem 0x7e201400-0x7e2015ff irq 48 disabled = compat brcm,bcm2835-pl011 (no driver attached) simplebus0: <serial@7e201600> mem 0x7e201600-0x7e2017ff irq 49 disabled = compat brcm,bcm2835-pl011 (no driver attached) simplebus0: <serial@7e201800> mem 0x7e201800-0x7e2019ff irq 50 disabled = compat brcm,bcm2835-pl011 (no driver attached) simplebus0: <serial@7e201a00> mem 0x7e201a00-0x7e201bff irq 51 disabled = compat brcm,bcm2835-pl011 (no driver attached) simplebus0: <spi@7e204600> mem 0x7e204600-0x7e2047ff irq 52 disabled = compat brcm,bcm2835-spi (no driver attached) simplebus0: <spi@7e204800> mem 0x7e204800-0x7e2049ff irq 53 disabled = compat brcm,bcm2835-spi (no driver attached) simplebus0: <spi@7e204a00> mem 0x7e204a00-0x7e204bff irq 54 disabled = compat brcm,bcm2835-spi (no driver attached) simplebus0: <spi@7e204c00> mem 0x7e204c00-0x7e204dff irq 55 disabled = compat brcm,bcm2835-spi (no driver attached) simplebus0: <i2c@7e205600> mem 0x7e205600-0x7e2057ff irq 56 disabled = compat brcm,bcm2835-i2c (no driver attached) simplebus0: <i2c@7e205800> mem 0x7e205800-0x7e2059ff irq 57 disabled = compat brcm,bcm2835-i2c (no driver attached) simplebus0: <i2c@7e205a00> mem 0x7e205a00-0x7e205bff irq 58 disabled = compat brcm,bcm2835-i2c (no driver attached) simplebus0: <i2c@7e205c00> mem 0x7e205c00-0x7e205dff irq 59 disabled = compat brcm,bcm2835-i2c (no driver attached) simplebus0: <pwm@7e20c800> mem 0x7e20c800-0x7e20c827 disabled compat = brcm,bcm2835-pwm (no driver attached) sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e340000-0x7e3400ff = irq 60 on simplebus0 sdhci_bcm0: SDHCI frequency: 100MHz sdhci_bcm0-slot0: 100MHz HS 8bits VDD: 3.3V 1.8V VCCQ: 3.3V DRV: BC PIO = embedded sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x018374c8 | Version: 0x00001002 sdhci_bcm0-slot0: Blk size: 0x00007200 | Blk cnt: 0x00000000 sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_bcm0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000002 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000080 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000107 sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x027f003b | Sig enab: 0x00000000 sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x45ee6432 | Caps2: 0x0000a525 sdhci_bcm0-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Card inserted mmc0: <MMC/SD bus> on sdhci_bcm0 sdhci_bcm1: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff = irq 61 on simplebus0 sdhci_bcm1: SDHCI frequency: 200MHz sdhci_bcm1-slot0: 200MHz HS 4bits VDD: 3.3V VCCQ: 3.3V DRV: B PIO = removable sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000000 sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm1-slot0: Int enab: 0x027f003b | Sig enab: 0x00000000 sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm1-slot0: Card inserted mmc1: <MMC/SD bus> on sdhci_bcm1 simplebus0: <mmcnr@7e300000> mem 0x7e300000-0x7e3000ff irq 62 disabled = compat brcm,bcm2835-mmc (no driver attached) simplebus0: <firmwarekms@7e600000> mem 0x7e600000-0x7e6000ff irq 63 = disabled compat raspberrypi,rpi-firmware-kms (no driver attached) simplebus0: <smi@7e600000> mem 0x7e600000-0x7e6000ff irq 64 disabled = compat brcm,bcm2835-smi (no driver attached) simplebus0: <axiperf> mem 0x7e009800-0x7e0098ff,0x7ee08000-0x7ee080ff = disabled compat brcm,bcm2835-axiperf (no driver attached) simplebus0: <firmware> compat raspberrypi,bcm2835-firmware (no driver = attached) simplebus0: <power> compat raspberrypi,bcm2835-power (no driver = attached) simplebus0: <gpiomem> mem 0x7e200000-0x7e200fff compat = brcm,bcm2835-gpiomem (no driver attached) fb0: <BCM2835 VT framebuffer driver> on simplebus0 fb0: keeping existing fb bpp of 32 fbd0 on fb0 WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD = 13.0. VT: Replacing driver "efifb" with new "fb". fb0: 1824x984(1824x984@0,0) 32bpp fb0: fbswap: 1, pitch 7296, base 0x3e513000, screen_size 7237632 simplebus0: <vcsm> compat raspberrypi,bcm2835-vcsm (no driver attached) simplebus0: <audio> disabled compat brcm,bcm2835-audio (no driver = attached) simplebus0: <virtgpio> compat brcm,bcm2835-virtgpio (no driver attached) ofwbus0: <arm-pmu> irq 0,1,2,3 compat arm,cortex-a72-pmu (no driver = attached) cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 cpu0: missing 'clock-frequency' property cpu1: <Open Firmware CPU> on cpulist0 cpu1: missing 'clock-frequency' property cpu2: <Open Firmware CPU> on cpulist0 cpu2: missing 'clock-frequency' property cpu3: <Open Firmware CPU> on cpulist0 cpu3: missing 'clock-frequency' property simplebus1: <v3d@7ec04000> mem = 0x7ec00000-0x7ec03fff,0x7ec04000-0x7ec07fff irq 65 disabled compat = brcm,2711-v3d (no driver attached) simplebus2: <pcie@7d500000> mem = 0x7d500000-0x7d50930f,0x7e00f300-0x7e00f31f irq 66,67 compat = brcm,bcm7211-pcie (no driver attached) simplebus2: <genet@7d580000> mem 0x7d580000-0x7d58ffff irq 68,69 compat = brcm,genet-v5 (no driver attached) simplebus2: <dma@7e007b00> mem 0x7e007b00-0x7e007eff irq 70,71,72,73 = compat brcm,bcm2838-dma (no driver attached) simplebus2: <xhci@7e9c0000> mem 0x7e9c0000-0x7eabffff irq 74 disabled = compat generic-xhci (no driver attached) simplebus2: <hevc-decoder@7eb00000> mem 0x7eb00000-0x7eb0ffff compat = raspberrypi,rpivid-hevc-decoder (no driver attached) simplebus2: <rpivid-local-intc@7eb10000> mem 0x7eb10000-0x7eb10fff irq = 75 compat raspberrypi,rpivid-local-intc (no driver attached) simplebus2: <h264-decoder@7eb20000> mem 0x7eb20000-0x7eb2ffff compat = raspberrypi,rpivid-h264-decoder (no driver attached) simplebus2: <vp9-decoder@7eb30000> mem 0x7eb30000-0x7eb3ffff compat = raspberrypi,rpivid-vp9-decoder (no driver attached) simplebus2: <mailbox@7e00b840> mem 0x7e00b840-0x7e00b87b irq 76 compat = brcm,bcm2838-vchiq (no driver attached) gpioled0: <GPIO LEDs> on ofwbus0 gpioled0: <led1> failed to map pin gpioregulator0: <GPIO controlled regulator> on ofwbus0 gpioregulator0: cannot get pin 0 gpioregulator0: cannot parse parameters device_attach: gpioregulator0 attach returned 6 cryptosoft0: <software crypto> crypto: assign cryptosoft0 driver id 0, flags 0x6000000 crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 34 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 35 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 36 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 37 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 40 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 39 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 38 flags 0 maxoplen 0 Device configuration finished. Found SMCCC version 1.0 procfs registered Timecounters tick every 1.000 msec lo0: bpf attached vlan: initialized, using hash tables with chaining IPsec: Initialized Security Association Processing. tcp_init: net.inet.tcp.tcbhashsize auto tuned to 32768 Obsolete code will be removed soon: random(9) is the obsolete = Park-Miller LCG from 1988 usb_needs_explore_all: no devclass sdhci_bcm0-slot0: Divider 125 for freq 400000 (base 100000000) mmc0: Probing bus mmc0: SD 2.0 interface conditions: OK mmc0: SD probe: OK (OCR: 0x40ff8000) mmc0: Current OCR: 0x00ff8000 mmc0: Probing cards mmc0: New card detected (CID 0353445350313238803189c957012200) mmc0: New card detected (CSD 400e00325b590003b8ab7f800a404000) mmc0: Card at relative address 0xaaaa added: mmc0: card: SDHC SP128 8.0 SN 3189C957 MFG 02/2018 by 3 SD mmc0: quirks: 0 mmc0: bus: 4bit, 50MHz (high speed timing) mmc0: memory: 249737216 blocks, erase sector 8192 blocks mmc0: setting transfer rate to 50.000MHz (high speed timing) sdhci_bcm0-slot0: Divider 1 for freq 50000000 (base 100000000) mmcsd0: 128GB <SDHC SP128 8.0 SN 3189C957 MFG 02/2018 by 3 SD> at mmc0 = 50.0MHz/4bit/65535-block sdhci_bcm1-slot0: Divider 250 for freq 400000 (base 200000000) mmc1: Probing bus GEOM: new disk mmcsd0 sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no = active command. sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000 sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no = active command. sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000 sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no = active command. sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000 sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no = active command. sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no = active command. sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no = active command. sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D mmc1: SD probe: failed mmc1: MMC probe: failed mmc1: Current OCR: 0x00000000 mmc1: No compatible cards found on bus Release APs...Trying to mount root from ufs:/dev/label/RPi4root = [rw,noatime]... APs not started CPU 0: ARM Cortex-A72 r0p3 affinity: 0 Instruction Set Attributes 0 =3D <CRC32> Instruction Set Attributes 1 =3D <> Processor Features 0 =3D <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 = 32> Processor Features 1 =3D <> Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16bit = ASID,16TB PA> Memory Model Features 1 =3D <8bit VMID> Memory Model Features 2 =3D <32bit CCIDX,48bit VA> Debug Features 0 =3D <2 CTX BKPTs,4 Watchpoints,6 = Breakpoints,PMUv3,Debugv8> Debug Features 1 =3D <> Auxiliary Features 0 =3D <> Auxiliary Features 1 =3D <> CPU 1: (null) (null) r0p0 affinity: 0 CPU 2: (null) (null) r0p0 affinity: 0 CPU 3: (null) (null) r0p0 affinity: 0 WARNING: WITNESS option enabled, expect reduced performance. regulator: shutting down unused regulators sdhci_bcm0-slot0: Controller timeout sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x000000c8 | Version: 0x00001002 sdhci_bcm0-slot0: Blk size: 0x00000040 | Blk cnt: 0x00000000 sdhci_bcm0-slot0: Argument: 0xaaaa0000 | Trn mode: 0x00000012 sdhci_bcm0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000005 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000080 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000107 sdhci_bcm0-slot0: Timeout: 0x00000003 | Int stat: 0x00000003 sdhci_bcm0-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003a sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x45ee6432 | Caps2: 0x0000a525 sdhci_bcm0-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Controller timeout sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x000000c8 | Version: 0x00001002 sdhci_bcm0-slot0: Blk size: 0x00000040 | Blk cnt: 0x00000000 sdhci_bcm0-slot0: Argument: 0xaaaa0000 | Trn mode: 0x00000012 sdhci_bcm0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000005 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000080 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000107 sdhci_bcm0-slot0: Timeout: 0x00000003 | Int stat: 0x00018002 sdhci_bcm0-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003a sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x45ee6432 | Caps2: 0x0000a525 sdhci_bcm0-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Controller timeout sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x000000c8 | Version: 0x00001002 sdhci_bcm0-slot0: Blk size: 0x00000040 | Blk cnt: 0x00000000 sdhci_bcm0-slot0: Argument: 0xaaaa0000 | Trn mode: 0x00000012 sdhci_bcm0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000005 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000080 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000107 sdhci_bcm0-slot0: Timeout: 0x00000003 | Int stat: 0x00018002 sdhci_bcm0-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003a sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x45ee6432 | Caps2: 0x0000a525 sdhci_bcm0-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Controller timeout sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x000000c8 | Version: 0x00001002 sdhci_bcm0-slot0: Blk size: 0x00000040 | Blk cnt: 0x00000000 sdhci_bcm0-slot0: Argument: 0xaaaa0000 | Trn mode: 0x00000012 sdhci_bcm0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000005 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000080 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000107 sdhci_bcm0-slot0: Timeout: 0x00000003 | Int stat: 0x00018002 sdhci_bcm0-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003a sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x45ee6432 | Caps2: 0x0000a525 sdhci_bcm0-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D mmc0: CMD7 failed, RESULT: 1 mmc0: Card at relative address 43690 failed to select sdhci_bcm0-slot0: Controller timeout sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x000000c8 | Version: 0x00001002 sdhci_bcm0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000001 sdhci_bcm0-slot0: Argument: 0x0ee2afff | Trn mode: 0x00000012 sdhci_bcm0-slot0: Present: 0x1fff0a06 | Host ctl: 0x00000005 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000080 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000107 sdhci_bcm0-slot0: Timeout: 0x00000003 | Int stat: 0x00018021 sdhci_bcm0-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003a sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x45ee6432 | Caps2: 0x0000a525 sdhci_bcm0-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D mmcsd0: Error indicated: 1 Timeout sdhci_bcm0-slot0: Controller timeout sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x000000c8 | Version: 0x00001002 sdhci_bcm0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000001 sdhci_bcm0-slot0: Argument: 0xaaaa0000 | Trn mode: 0x00000012 sdhci_bcm0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000005 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000080 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000107 sdhci_bcm0-slot0: Timeout: 0x00000003 | Int stat: 0x00018002 sdhci_bcm0-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003a sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x45ee6432 | Caps2: 0x0000a525 sdhci_bcm0-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Controller timeout sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x000000c8 | Version: 0x00001002 sdhci_bcm0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000001 sdhci_bcm0-slot0: Argument: 0xaaaa0000 | Trn mode: 0x00000012 sdhci_bcm0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000005 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000080 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000107 sdhci_bcm0-slot0: Timeout: 0x00000003 | Int stat: 0x00018002 sdhci_bcm0-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003a sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x45ee6432 | Caps2: 0x0000a525 sdhci_bcm0-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Controller timeout sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x000000c8 | Version: 0x00001002 sdhci_bcm0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000001 sdhci_bcm0-slot0: Argument: 0xaaaa0000 | Trn mode: 0x00000012 sdhci_bcm0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000005 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000080 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000107 sdhci_bcm0-slot0: Timeout: 0x00000003 | Int stat: 0x00018002 sdhci_bcm0-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003a sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x45ee6432 | Caps2: 0x0000a525 sdhci_bcm0-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Controller timeout sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x000000c8 | Version: 0x00001002 sdhci_bcm0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000001 sdhci_bcm0-slot0: Argument: 0xaaaa0000 | Trn mode: 0x00000012 sdhci_bcm0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000005 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000080 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000107 sdhci_bcm0-slot0: Timeout: 0x00000003 | Int stat: 0x00018002 sdhci_bcm0-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003a sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x45ee6432 | Caps2: 0x0000a525 sdhci_bcm0-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D mmc0: CMD7 failed, RESULT: 1 mmc0: Card at relative address 43690 failed to select sdhci_bcm0-slot0: Controller timeout sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x000000c8 | Version: 0x00001002 sdhci_bcm0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000001 sdhci_bcm0-slot0: Argument: 0x0ee2afff | Trn mode: 0x00000012 sdhci_bcm0-slot0: Present: 0x1fff0a06 | Host ctl: 0x00000005 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000080 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000107 sdhci_bcm0-slot0: Timeout: 0x00000003 | Int stat: 0x00018021 sdhci_bcm0-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003a sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x45ee6432 | Caps2: 0x0000a525 sdhci_bcm0-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D mmcsd0: Error indicated: 1 Timeout sdhci_bcm0-slot0: Controller timeout sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER = DUMP =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x000000c8 | Version: 0x00001002 sdhci_bcm0-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000001 sdhci_bcm0-slot0: Argument: 0xaaaa0000 | Trn mode: 0x00000012 sdhci_bcm0-slot0: Present: 0x1fff0000 | Host ctl: 0x00000005 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000080 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000107 sdhci_bcm0-slot0: Timeout: 0x00000003 | Int stat: 0x00018002 sdhci_bcm0-slot0: Int enab: 0x01ff003b | Sig enab: 0x01ff003a sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x45ee6432 | Caps2: 0x0000a525 sdhci_bcm0-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000001 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D (It kept going after this but I stopped copying here.) =3D=3D=3D Mark Millard marklmi at yahoo.com ( dsl-only.net went away in early 2018-Mar)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?EFE1B845-FD79-4EF7-A980-E14321273EE0>