From owner-aic7xxx  Thu Mar 18  1:57:49 1999
Delivered-To: aic7xxx@freebsd.org
Received: from zeus.ai-lab.fh-furtwangen.de (zeus.ai-lab.fh-furtwangen.de [141.28.33.99])
	by hub.freebsd.org (Postfix) with ESMTP id 7862414DC6
	for <aic7xxx@FreeBSD.ORG>; Thu, 18 Mar 1999 01:57:44 -0800 (PST)
	(envelope-from egle@ai-lab.fh-furtwangen.de)
Received: from phi.ai-lab.fh-furtwangen.de (phi.ai-lab.fh-furtwangen.de [141.28.33.22])
	by zeus.ai-lab.fh-furtwangen.de (8.8.8/8.8.8) with ESMTP id KAA12756
	for <aic7xxx@FreeBSD.ORG>; Thu, 18 Mar 1999 10:57:21 +0100 (MET)
Received: from localhost (egle@localhost)
	by phi.ai-lab.fh-furtwangen.de (8.8.7/8.8.7) with SMTP id KAA01914
	for <aic7xxx@FreeBSD.ORG>; Thu, 18 Mar 1999 10:57:20 +0100
Date: Thu, 18 Mar 1999 10:57:20 +0100 (CET)
From: Markus Egle <egle@ai-lab.fh-furtwangen.de>
To: aic7xxx@FreeBSD.ORG
Subject: Re: AIC 7890/1 Ultra 2 under Linux
In-Reply-To: <Pine.LNX.4.02.9903171055001.2012-100000@gamma.ai-lab.fh-furtwangen.de>
Message-ID: <Pine.LNX.4.02.9903180946390.1791-100000@phi.ai-lab.fh-furtwangen.de>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-aic7xxx@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

On Wed, 17 Mar 1999, Markus Egle wrote:

> I have the same problem. I couldn't install RedHat5.2 (2.0.36) (mount
> failed,  after scanning the scsi-bus).
> RedHat5.1 (2.0.34) aic7xxx-5.1.10 was successful. 
> 
> Trying the 2.2.[0-2] showed the same problem. Adding some boot-options,
> like: aic7xxx=no_reset  aic7xxx=extended  aic7xxx=no_probe   didn't help.
> 
> I've tried booting without any CDROMS and on both Channels, tested
> some options of the SCSI-Adapter, limited the speed, checked the
> termination several times, ....
HD is a DGVS and not a DRVS, sorry.

Now I tried again with 2.2.2 and 5.1.12 and without LUN (already had it in
2.2.1)  I still get an kernel panic.

  :
  :
(scsi 0:0:0:0) Synchronous at 40.0 Mbyte/sec, offset 8.
(scsi 0= BRKADRINT error (0x20):
  Scratch Ram/SCB Array Ram Parity error
(scsi 0) SEQADDR = 0x15c
(scsi 0= BRKADRINT error (0x20):
  Scratch Ram/SCB Array Ram Parity error
(scsi 0) SEQADDR = 0x166
(scsi 0= BRKADRINT error (0x20):
  Scratch Ram/SCB Array Ram Parity error
(scsi 0) SEQADDR = 0x178
(scsi 0= BRKADRINT error (0x20):
  Scratch Ram/SCB Array Ram Parity error
(scsi 0) SEQADDR = 0x179
(scsi 0= BRKADRINT error (0x20):
  Scratch Ram/SCB Array Ram Parity error
(scsi 0) SEQADDR = 0xc4
(scsi 0= BRKADRINT error (0x20):
  Scratch Ram/SCB Array Ram Parity error
(scsi 0) SEQADDR = 0x153
SCSI device sda: hdwr sector= 512 bytes  Sectors= 17829870 [8705MB]
[8,7GB]
Partition check:
  sda: sda1 sda3 sda4 <sda5 sda6 sda7>
Freeing unused kernel memory: 36k freed
Kernel panic: aic7xxx: AWAITING_MSG for an SCB that does not have a
waiting message
In swapper task - not syncing    



I'm wondering why there is a difference between downloading sequencer code

2.2.2 > (scsi0) Downloading sequencer code... 404 instructions downloaded
2.0.34> (scsi0) Downloading sequencer code... 413 instructions downloaded


other error-messages and config-files at
http://www.ai-lab.fh-furtwangen.de/~egle/kernel_probs.html


Any ideas, 

Markus Egle



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message